Skip to content

← Fix It, in Practice

Plugs, fuses and lights · 38 of 58

Reset a tripped switch on the fuse board, once

Official advice

Do this

  1. Check that it’s not a power cut. Neighbors dark too? Then wait.
  2. Dry your hands. Stand on a dry floor. Water, a burning smell or scorch marks? Touch nothing, and get an adult.
  3. Turn off or unplug what was running, like a heater, iron or kettle.
  4. Open the board’s cover. The tripped switch (an MCB, or an RCD/ELCB) is the one pointing the other way, usually down.
  5. Push it fully up, once.
  6. Trips again? Leave it off and find what’s tripping it.

Why this way

A switch trips because too much is running or something is faulty. It protects the wiring and you. Never tape or hold a switch on. An old board with pull-out fuses is different: leave it alone. Official advice.

Do it today

Ask an adult to show you the board and which switch runs what. Learn the main switch too. Five minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix