Water, power and gas · 77 of 109
Swap a gas cylinder with an adult
Not tested on its own
Do this
With an adult, the first few times:
- Put out every flame. Don’t touch electric switches.
- Close the stove knobs, then turn the regulator off.
- Lift its locking ring, and pull the regulator up, turning it gently.
- Put the safety cap on the old cylinder.
- On the new one, remove the seal and cap. Check that the rubber ring inside the valve isn’t missing or cracked.
- With the regulator off, press it straight down until it locks.
- Turn it on, and test with soapy water. Bubbles? Turn it off, and call the dealer.
Why this way
These steps come from a gas company’s guide for a clip-on regulator, plus Hong Kong’s check of the rubber ring. Yours may differ, so ask your dealer to show you. Not tested on its own.
Do it today
Next time a cylinder comes, watch how it’s done. Five minutes.
Where these facts come from
- How to replace a cylinder, TotalEnergies South Africa.
- Correct Steps to Change LPG Cylinders, Electrical and Mechanical Services Department, Hong Kong.
General information. Read the labels on cleaning products, and never mix them. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
