Gas, fire and electricity at home · 14 of 81
Check the gas pipe with soapy water
Official advice
Do this
- With an adult, and with the stove off, run your fingers along the rubber pipe. Is it hard, cracked or loose?
- Mix detergent and water. With the regulator on and all burners off, put it on the pipe and each joint, from the cylinder to the stove.
- Bubbles mean a leak. Turn the gas off at once, and don’t use it until it’s fixed.
- Wipe the soap off with clean water.
- Buy pipes and regulators only from a certified dealer.
Why this way
Gas has a smell added so you notice a leak, but a small leak is easy to miss. A soap test shows exactly where it is. A former chief of the Kathmandu Fire Brigade tells people to check their rubber pipes. Official advice.
Do it today
Look along the whole pipe with an adult this evening. Three minutes.
For example
Tika’s family in Hetauda tested the pipe one Saturday. Bubbles grew at the joint by the stove, so her father turned off the gas and called the dealer.
Where these facts come from
- Using natural gas and LPG safely, Queensland Government.
- As accidents rise, concerns grow over safety of cooking gas cylinders, The Kathmandu Post, 2023.
General safety information, written from published guidance, not a safety inspection or professional advice. No page can fit every building, road or storm. In a real emergency, follow the police, fire service, and local authorities. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
