Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
10 questions
Unit 20 · Paper and Pulp
Printable PDFs
- Study notes 2 pages
- Worksheet 5 pages Answer key
B. Short answer questions
Give reasons:
- a.Softwood is preferred over hardwood in paper production.
- b.Lokta paper is preferred for keeping official records.
Answer
- a.Softwood (pine, spruce, fir) has long fibers, about 3–4 mm, against hardwood’s 1 mm. Long fibers overlap and hold on to many neighbors, so the sheet is stronger and tears less easily: they are needed for strong papers such as packaging, sacks and the base of most printing papers. (Hardwood’s short fibers are still added for smoothness.)
- b.Lokta paper is very durable: its long, strong bast fibers make a tough sheet; it contains no acid sizing, so it does not slowly weaken and crumble; and it resists insects, fungi and moisture. Records written on it can be kept for centuries.
What are the raw materials of paper production?
Answer
Fibrous raw materials, which form the sheet: softwood (pine, spruce, fir), hardwood (eucalyptus, poplar), bamboo, bagasse, straw of wheat, rice, barley and maize and grasses (babiyo, kush, siru, reeds, lemon grass), jute, cotton rags, lokta and recycled paper.
Non-fibrous raw materials, which improve it: inorganic, such as sodium hydroxide and sodium sulphide (pulping), alum (sizing and pH), kaolin, calcium carbonate and titanium dioxide (fillers and brightness), and bleaches (H₂O₂, Cl₂, NaClO); organic, such as starch, rosin, dyes and pigments, optical brighteners, synthetic binders, glycerol and wax. And a great deal of water.
Explain the qualities of paper.
Answer
Paper quality is the set of properties that decide how well a paper does its job:
- Strength and durability: set by the fiber length and the pulp (chemical pulp is stronger than mechanical).
- Weight and thickness (GSM): heavier paper is stiffer and more opaque.
- Surface finish: glossy, matte, coated or uncoated; smoothness gives sharp printing.
- Brightness and whiteness: from bleaching, fillers and optical brighteners.
- Absorbency and sizing: sized paper holds ink on its surface without spreading.
- Opacity: how little shows through from the other side (fillers increase it).
High-quality paper is strong, smooth, bright and well sized; low-quality paper (newsprint) is thin, weak and yellows.
What are the fibrous raw materials used for making paper?
Answer
Softwood (long fibers, strength: pine, spruce, fir), hardwood (short fibers, smoothness: eucalyptus, poplar), bamboo, bagasse (sugarcane waste), straw (wheat, rice, barley, maize) and grasses such as babiyo, kush, siru, reeds and lemon grass, jute, cotton rags, lokta (bast fiber from the inner bark of Daphne) and recycled paper.
Differentiate between:
- a.paper and pulp
- b.mechanical pulping and chemical pulping
Answer
a.
| Pulp | Paper |
|---|---|
| a soft, wet mass of separated plant fibers in water | a thin, dry, flexible sheet formed from pulp |
| the raw material, made in pulping | the finished product, made on the paper machine |
| fibers loose, free to move | fibers bonded to each other by hydrogen bonds |
| mostly water | about 5–8% water |
b.
| Mechanical pulping | Chemical pulping |
|---|---|
| wood ground or shredded by machine | chips cooked in chemicals (NaOH + Na₂S) that dissolve lignin |
| no or very few chemicals | chemicals used |
| high yield, about 90–95% | low yield, about 45–50% |
| short, weak fibers; lignin stays | long, strong fibers; lignin removed |
| less durable paper that yellows (newsprint) | durable paper (books, writing paper) |
What are the non-fibrous raw materials of paper and pulp?
Answer
Inorganic: sodium hydroxide (breaks down lignin in pulping); alum, aluminium sulphate (sizing and pH control); kaolin (smoothness, brightness); calcium carbonate (whiteness, opacity); titanium dioxide (opacity and brightness); and others: Na₂S, Na₂CO₃, Na₂SO₃, Mg(OH)₂ (pulping), H₂O₂, Cl₂, NaClO (bleaching), talc (filler).
Organic: starch (surface strength, printability); rosin (water resistance); dyes and pigments (color); optical brightening agents (look whiter); synthetic binders (bond fibers and fillers); glycerol (flexibility, softness); wax (water resistance, smooth coating).
What are the stages in the industrial production of paper?
Answer
- Timber: trees are felled and the logs carried to the mill.
- Debarking: the bark is removed, usually in a rotating drum.
- Chipping and screening: logs are cut into even chips, and wrong-sized ones screened out.
- Pulping: chips are turned into pulp mechanically or chemically (cooking with NaOH and Na₂S).
- Bleaching, cleaning, additives and blending: the pulp is washed, bleached and mixed with fillers, dyes and sizing; pulps are blended.
- Forming, pressing and drying: the stock is spread on the moving wire, pressed and dried on steam-heated cylinders.
- Final product: the paper is calendered smooth, wound, cut and packed.
Give a flow sheet diagram for paper production.
Answer
The flow sheet is Figure 20.4: timber → debarking → chipping and screening → pulping → bleaching, cleaning, additives and blending → forming, pressing and drying → calendering (series of pressure rolls) → winding on the reel → finished paper. The mill itself is drawn in Figure 20.3.
C. Long answer questions
Describe the stages in the manufacture of paper. Draw a flow sheet diagram showing the different stages of paper production.
Hint
Seven stages, from the log to the reel; say what each removes or adds, then draw them in order with arrows.
Answer
- Timber. Trees, mostly softwood for strength and hardwood for smoothness, are felled and the logs carried to the mill.
- Debarking. The logs tumble in a rotating debarking drum, rubbing their bark off. Bark is low in fiber and full of dirt and dark matter, so it is burned as fuel instead.
- Chipping and screening. A disc chipper cuts the logs into chips 2–3 cm long, and screens remove oversized and undersized ones so all cook evenly.
- Pulping. In mechanical pulping the wood is ground into fibers (high yield, weak paper, lignin kept). In chemical (kraft) pulping the chips are cooked in a digester at about 170 °C under pressure in white liquor, NaOH + Na₂S, which dissolves the lignin and frees long, strong cellulose fibers; the black liquor is burned to recover the chemicals and make energy.
- Bleaching, cleaning, additives and blending. The pulp is washed and cleaned, bleached with chlorine dioxide, oxygen or hydrogen peroxide, beaten to fray the fibers, and mixed with fillers (kaolin, CaCO₃), sizing (rosin and alum, or starch), dyes and optical brighteners; pulps are blended for the properties wanted.
- Forming, pressing and drying. The stock, about 99% water, flows from the headbox onto the moving wire; water drains and the fibers form a wet sheet. Press rolls squeeze out more water, and steam-heated cylinders dry the sheet to about 5% water.
- Final product. The calender’s rolls press the paper smooth; it is wound on a reel, cut, and packed.
Flow sheet:
Timber → Debarking → Chipping and screening → Pulping → Bleaching, cleaning, additives, blending → Forming, pressing, drying → Calendering (pressure rolls) → Winding on the reel → Finished paper. (The plant is drawn in Figure 20.3.)
Write a note on raw materials for pulp and the qualities of paper.
Answer
Raw materials for pulp. Pulp is made of cellulose fibers. Softwood (pine, spruce, fir) gives long fibers for strength; hardwood (eucalyptus, poplar) short fibers for smoothness and printing. Non-wood sources are bamboo (fast-growing, strong fibers), bagasse (sugarcane waste), straw of wheat, rice, barley and maize, and grasses such as babiyo, kush and siru; jute; cotton rags (almost pure cellulose, for fine and handmade paper); lokta bark (strong bast fibers for Nepal’s handmade paper); and recycled paper. Chemicals such as NaOH and Na₂S free the fibers from lignin in pulping, and bleaches whiten them.
Qualities of paper. Paper quality is the set of properties that fit a paper for its use: strength and durability (from the fibers and pulp), weight and thickness (GSM), surface finish (glossy, matte, coated), brightness and whiteness (bleaching, fillers, brighteners), opacity, and sizing (how ink is absorbed). By these, paper is graded as premium (certificates, brochures, magazines), standard (books, office paper), low quality (newspapers, flyers), specialty (tissue, wrapping) and Nepali lokta paper (official records, crafts), prized because it lasts for centuries.
