Skip to content

← Grade 12 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

14 questions

Unit 9 · Haloarenes

Printable PDFs

Exercise 9.2

1.

Write the possible isomers of C₆H₄Cl₂. Draw their structures and name them.

Hint

Fix one chlorine on carbon 1 and move the other round the ring.

Answer

There are three, the position isomers in Figure 9.4:

  • i.1,2-dichlorobenzene (o-dichlorobenzene), the chlorines on neighboring carbons;
  • ii.1,3-dichlorobenzene (m-dichlorobenzene), one carbon between them;
  • iii.1,4-dichlorobenzene (p-dichlorobenzene), opposite each other.

Putting the second chlorine on carbon 5 or 6 gives the same compounds as 3 and 2, numbered the other way round.

2.

There are different methods for the preparation of chlorobenzene.

  • i.What happens when benzene is treated with chlorine?
  • ii.How will you prepare chlorobenzene from benzenediazonium chloride? Name the reaction.
  • iii.What is the use of CuCl in the preparation of chlorobenzene from the diazonium chloride?
Answer

i. With anhydrous FeCl₃ in the dark, an H of the ring is replaced by Cl (electrophilic substitution):
CX6HX6+ClX2→darkFeClX3CX6HX5Cl+HCl \ce{C6H6 + Cl2 ->[FeCl3][dark] C6H5Cl + HCl}
(In sunlight with no carrier, three Cl₂ add instead, giving benzene hexachloride, C₆H₆Cl₆.)
ii. Warm the cold diazonium solution with copper(I) chloride in hydrochloric acid:
CX6HX5NX2X+ClX−→warmCuCl/HClCX6HX5Cl+NX2 \ce{C6H5N2+Cl- ->[CuCl/HCl][warm] C6H5Cl + N2}
This is the Sandmeyer reaction. (With copper powder and HCl it is the Gattermann reaction.)
iii. CuCl is the catalyst: it gives an electron to the diazonium ion, which loses N₂ as a phenyl radical, and passes it a chlorine atom. Without it the warm diazonium salt would react mostly with the water, giving phenol.

3.

Chlorobenzene is an aromatic compound in which chlorine is bonded to a carbon of the ring.

  • i.Compare the solubility of chlorobenzene in water and in organic solvents.
  • ii.Arrange chlorobenzene, bromobenzene and iodobenzene in increasing order of boiling point.
  • iii.Why is the boiling point of chlorobenzene higher than that of benzene?
Answer
  • i.Insoluble in water (it can’t hydrogen-bond with water, and breaking water’s hydrogen bonds costs more energy than it gains), but soluble in organic solvents such as ether, ethanol and benzene, whose molecules attract it by the same kind of forces it has itself.
  • ii.Chlorobenzene (132 °C) < bromobenzene (156 °C) < iodobenzene (188 °C).
  • iii.Chlorobenzene (112.6 g/mol) is heavier than benzene (78 g/mol), with more electrons, so its dispersion forces are stronger; it is also polar (dipole moment 1.69 D), adding dipole–dipole attraction, while benzene is non-polar. More energy is needed to separate its molecules.
4.

A nucleophilic substitution reaction is the replacement of one group by a nucleophile to give a new compound.

  • i.Explain why haloarenes are less reactive towards nucleophilic substitution.
  • ii.Compare the strength of the C–Cl bond, and the reactivity towards nucleophilic substitution, of a haloarene and a haloalkane.
Answer
  • i.a. Resonance: a lone pair of the halogen spreads into the ring (structures with C=X⁺, Figure 9.13), so the C–X bond is partly double, shorter and stronger.
  • b.Hybridization: the carbon is sp², more electronegative than sp³, so it holds the bonding pair more tightly; the bond is shorter, stronger and less polar.
  • c.Repulsion: the electron-rich π cloud of the ring repels the incoming nucleophile.
  • d.No mechanism: the back of the C–X bond is inside the ring (no SN2 \mathrm{S_N2} ), and the phenyl cation is very unstable (no SN1 \mathrm{S_N1} ).

ii.

Chlorobenzene (haloarene) Chloroethane (haloalkane)
carbon holding Cl sp² sp³
C–Cl bond partly double, 169 pm, about 400 kJ/mol single, 177 pm (in CH₃Cl), about 350 kJ/mol
bond strength stronger weaker
with aqueous NaOH only at 623 K and 300 atm on warming
reactivity towards nucleophiles very low high
5.

In chlorobenzene, an electronegative chlorine atom is attached to a carbon of the ring.

  • i.How could you show that –Cl is an ortho and para director in chlorobenzene?
  • ii.In spite of being an ortho–para director, –Cl deactivates the aromatic ring. Explain.
Answer
  • i.By experiment: nitrate chlorobenzene with concentrated HNO₃ and H₂SO₄ and identify the products: they are 1-chloro-2-nitrobenzene and 1-chloro-4-nitrobenzene, with only a trace of the meta isomer. By theory: chlorine’s lone pair, pushed into the ring by resonance, puts negative charge on carbons 2, 4 and 6, the ortho and para positions (Figure 9.13); and in the ion formed by ortho or para attack, chlorine’s lone pair can share the positive charge (C=Cl⁺, Figure 9.20), which is impossible in meta attack.
  • ii.Chlorine is very electronegative and withdraws electrons through the σ bond (−I effect) from the whole ring. This outweighs its electron-giving resonance (+M), so the ring has less electron density than benzene and reacts more slowly with electrophiles (it is nitrated about 30 times more slowly). The −I effect sets the rate (deactivating); the +M effect sets the place (ortho, para).
6.

Complete the following reactions and identify the major product.
i.
CX6HX5Cl+conc. HNOX3→conc.  HX2SOX4 \ce{C6H5Cl + conc{.} HNO3 ->[\text{conc. } H2SO4] }
ii.
CX6HX5Cl+conc. HX2SOX4→Δ \ce{C6H5Cl + conc{.} H2SO4 ->[\Delta] }
iii.
CX6HX5Cl+CHX3COCl→anhyd.  AlClX3 \ce{C6H5Cl + CH3COCl ->[\text{anhyd. } AlCl3] }
iv.
CX6HX5Cl+CHX3Cl→anhyd.  AlClX3 \ce{C6H5Cl + CH3Cl ->[\text{anhyd. } AlCl3] }
v.
CX6HX5Cl+ClX2→FeClX3 \ce{C6H5Cl + Cl2 ->[FeCl3] }

Answer

In each, ortho and para products form; the para product is the major one.
i. 1-chloro-4-nitrobenzene (major), with 1-chloro-2-nitrobenzene:
CX6HX5Cl+HNOX3→conc.  HX2SOX4ClCX6HX4NOX2+HX2O \ce{C6H5Cl + HNO3 ->[\text{conc. } H2SO4] ClC6H4NO2 + H2O}
ii. 4-chlorobenzenesulphonic acid (major), with the 2- isomer:
CX6HX5Cl+HX2SOX4→ΔClCX6HX4SOX3H+HX2O \ce{C6H5Cl + H2SO4 ->[\Delta] ClC6H4SO3H + H2O}
iii. 4-chloroacetophenone (major), with 2-chloroacetophenone:
CX6HX5Cl+CHX3COCl→anhyd.  AlClX3ClCX6HX4COCHX3+HCl \ce{C6H5Cl + CH3COCl ->[\text{anhyd. } AlCl3] ClC6H4COCH3 + HCl}
iv. 4-chlorotoluene (major), with 2-chlorotoluene:
CX6HX5Cl+CHX3Cl→anhyd.  AlClX3ClCX6HX4CHX3+HCl \ce{C6H5Cl + CH3Cl ->[\text{anhyd. } AlCl3] ClC6H4CH3 + HCl}
v. 1,4-dichlorobenzene (major), with 1,2-dichlorobenzene:
CX6HX5Cl+ClX2→FeClX3CX6HX4ClX2+HCl \ce{C6H5Cl + Cl2 ->[FeCl3] C6H4Cl2 + HCl}
The structures are in Figure 9.22, Figure 9.24, Figure 9.26, Figure 9.25 and Figure 9.21.

7.

Complete the following reactions.

  • i.CX6HX5Cl+HX2→Ni,Δ \ce{C6H5Cl + H2 ->[Ni, \Delta] }
  • ii.CX6HX5Cl→Na,  CX2HX5OH \ce{C6H5Cl ->[Na,\ C2H5OH] }
  • iii.CX6HX5Cl→Zn,  NaOH \ce{C6H5Cl ->[Zn,\ NaOH] }

iv.
CX6HX5Cl→Na,  dry ether \ce{C6H5Cl ->[Na,\ \text{dry ether}] }
v.
CX6HX5Cl+CHX3Cl→Na,  dry ether \ce{C6H5Cl + CH3Cl ->[Na,\ \text{dry ether}] }

Hint

i–iii are reductions: the C–Cl bond is replaced by C–H. iv and v join groups with sodium.

Answer

i. Benzene (hydrogenolysis of the C–Cl bond):
CX6HX5Cl+HX2→ΔNiCX6HX6+HCl \ce{C6H5Cl + H2 ->[Ni][\Delta] C6H6 + HCl}
ii. Benzene; sodium and ethanol give nascent hydrogen:
CX6HX5Cl+2 [H]→Na/CX2HX5OHCX6HX6+HCl \ce{C6H5Cl + 2[H] ->[Na/C2H5OH] C6H6 + HCl}
iii. Benzene: zinc in alkali also gives nascent hydrogen, which replaces the chlorine by hydrogen:
CX6HX5Cl+2 [H]→Zn/NaOHCX6HX6+HCl \ce{C6H5Cl + 2[H] ->[Zn/NaOH] C6H6 + HCl}
iv. Biphenyl (Fittig reaction):
2 CX6HX5Cl+2 Na→dry etherCX6HX5−CX6HX5+2 NaCl \ce{2C6H5Cl + 2Na ->[\text{dry ether}] C6H5–C6H5 + 2NaCl}
v. Toluene (Wurtz–Fittig reaction):
CX6HX5Cl+CHX3Cl+2 Na→dry etherCX6HX5CHX3+2 NaCl \ce{C6H5Cl + CH3Cl + 2Na ->[\text{dry ether}] C6H5CH3 + 2NaCl}

8.

There are several name reactions in which halogen compounds are treated with sodium in dry ether.

  • i.What happens when chlorobenzene is treated with chloroethane and sodium in dry ether? Name the reaction.
  • ii.Compare the Fittig and Wurtz–Fittig reactions with suitable examples.
Answer

i. Ethylbenzene forms:
CX6HX5Cl+CX2HX5Cl+2 Na→dry etherCX6HX5CX2HX5+2 NaCl \ce{C6H5Cl + C2H5Cl + 2Na ->[\text{dry ether}] C6H5C2H5 + 2NaCl}
This is the Wurtz–Fittig reaction (Figure 9.34).

Cl+CH3CH2Cl+Na2dry etherethylbenzene+NaCl2Cl+CH3CH2Cl+Na2dry etherethylbenzene+NaCl2
Figure 9.34 Chlorobenzene and chloroethane with sodium give ethylbenzene.

ii.

Fittig reaction Wurtz–Fittig reaction
halides used aryl halide only an aryl halide and an alkyl halide
product a biaryl (Ar–Ar) an alkylarene (Ar–R)
example 2 CX6HX5Cl+2 Na→CX6HX5−CX6HX5+2 NaCl \ce{2C6H5Cl + 2Na -> C6H5–C6H5 + 2NaCl} , biphenyl CX6HX5Cl+CHX3Cl+2 Na→CX6HX5CHX3+2 NaCl \ce{C6H5Cl + CH3Cl + 2Na -> C6H5CH3 + 2NaCl} , toluene
side products none of note Ar–Ar and R–R as well

Both use sodium in dry ether, and both join two carbon groups with loss of NaX.

9.

Chlorobenzene is used to make insecticides.

  • i.What is the full form of DDT? Write its structure and IUPAC name.
  • ii.What happens when chlorobenzene is treated with chloral in the presence of H₂SO₄?
  • iii.Why is the product of this reaction used as an insecticide?
Answer
  • i.p,p′-Dichlorodiphenyltrichloroethane. Structure in Figure 9.30: (ClC₆H₄)₂CH–CCl₃. IUPAC name: 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane.
  • ii.Two molecules of chlorobenzene condense with chloral at their para positions, giving DDT and water:

2 CX6HX5Cl+CClX3CHO→conc.  HX2SOX4(ClCX6HX4)X2CHCClX3+HX2O \ce{2C6H5Cl + CCl3CHO ->[\text{conc. } H2SO4] (ClC6H4)2CHCCl3 + H2O}
iii. DDT is a contact nerve poison for insects: it keeps their nerve cells’ sodium channels open, so the nerves fire uncontrollably. It works on contact, it is very stable, so one spraying lasts months, and at the doses used it is far less poisonous to people than to insects. (Its stability and solubility in fat also make it build up in food chains, which is why it is now banned for farm use.)

10.

Polychlorinated biphenyls were widely used in the past but are banned now. Explain the reason.

Answer

Polychlorinated biphenyls (PCBs) are biphenyl with 2 to 10 chlorine atoms on its rings (Figure 9.33). They don’t burn, don’t conduct electricity and don’t break down, so from the 1930s they were used as insulating oils in transformers and capacitors, and in paints, inks and sealants.
The same properties made them dangerous:

  • a.Persistent: their aryl C–Cl bonds are very hard to break, so they last for decades in soil, water and sediments.
  • b.Bioaccumulate: they dissolve in fat, not water, so they collect in the fat of fish, birds and people, and become more concentrated up the food chain.
  • c.Toxic: they damage the liver, skin, immune and hormone systems, and are known to cause cancer.
  • d.Travel far: they evaporate and are carried by air, even to the Arctic.

So their making was banned (in the United States in 1979), and the Stockholm Convention of 2001 requires every country to end their use and destroy what is left.

11.

Complete the following reactions.

  • i.benzenediazonium chloride, with Cu/HBr →
  • ii.benzenediazonium chloride, with CuCl/HCl →
Answer

i. Bromobenzene (Gattermann reaction, Figure 9.35):
CX6HX5NX2Cl+HBr→CuCX6HX5Br+NX2+HCl \ce{C6H5N2Cl + HBr ->[Cu] C6H5Br + N2 + HCl}

Cl−NN++HBrCu powderwarmBrbromobenzene+NN+HClCl−NN++HBrCu powderwarmBrbromobenzene+NN+HCl
Figure 9.35 Benzenediazonium chloride with copper powder and hydrobromic acid gives bromobenzene.

ii. Chlorobenzene (Sandmeyer reaction, Figure 9.8):
CX6HX5NX2X+ClX−→CuCl/HClCX6HX5Cl+NX2 \ce{C6H5N2+Cl- ->[CuCl/HCl] C6H5Cl + N2}

12.

Why does the reaction of chlorobenzene with aqueous NaOH happen only at high temperature and pressure, while benzyl chloride reacts readily under mild conditions? Explain from the mechanisms.

Answer

Benzyl chloride, C₆H₅CH₂Cl, has its chlorine on an sp³ carbon outside the ring, with an ordinary C–Cl single bond. Both mechanisms are open:

  • SN1 \mathrm{S_N1} : Cl⁻ leaves, giving the benzyl cation, C₆H₅CH₂⁺, which is stabilized by resonance with the ring (Figure 9.18); water or OH⁻ then adds, giving benzyl alcohol.
  • SN2 \mathrm{S_N2} : the CH₂ carbon is unhindered, so OH⁻ can attack it from the back, opposite the Cl.

So the reaction is fast in warm alkali:
CX6HX5CHX2Cl+NaOH→CX6HX5CHX2OH+NaCl \ce{C6H5CH2Cl + NaOH -> C6H5CH2OH + NaCl}
Chlorobenzene has its chlorine on an sp² ring carbon, and neither mechanism works:

  • SN1 \mathrm{S_N1} would need the phenyl cation, C₆H₅⁺, whose empty sp² orbital lies in the plane of the ring and gets no help from the π electrons: it is very unstable.
  • SN2 \mathrm{S_N2} would need attack from behind the C–Cl bond, which is inside the ring; and the ring’s π cloud repels the nucleophile.
  • And the C–Cl bond itself is partly double by resonance (169 pm), stronger than in benzyl chloride.

So only forcing conditions, 623 K and 300 atm (Dow’s process), make chlorobenzene react.

13.

Explain why chlorobenzene behaves differently from trichloromethane (CHCl₃) with reducing agents such as Zn/HCl.

Answer

Trichloromethane is a haloalkane: its three C–Cl bonds are ordinary single bonds on an sp³ carbon. Zinc and hydrochloric acid (nascent hydrogen) reduce it readily, one chlorine at a time, giving dichloromethane:
CHClX3+2 [H]→Zn/HClCHX2ClX2+HCl \ce{CHCl3 + 2[H] ->[Zn/HCl] CH2Cl2 + HCl}
Chlorobenzene’s C–Cl bond is partly double by resonance, shorter and stronger (about 400 kJ/mol against about 350), so Zn/HCl doesn’t reduce it. It needs a stronger reducing system, such as Ni–Al alloy in NaOH (Section 9.5.2), or sodium in ethanol.

14.

Carry out the following conversions.

  • i.Nitrobenzene to chlorobenzene
  • ii.Chlorobenzene to aniline
  • iii.Chlorobenzene to benzoic acid
  • iv.Chlorobenzene to phenol
Answer

i. Reduce nitrobenzene to aniline with tin and concentrated HCl; diazotize the aniline with NaNO₂ and HCl at 0–5 °C; then warm with CuCl/HCl (Sandmeyer):

ON+O−nitrobenzeneSnconc. HClNH2anilineNaNO2, HCl0–5 °CCl−NN+benzenediazonium chlorideCuCl, HClClchlorobenzeneON+O−nitrobenzeneSnconc. HClNH2anilineNaNO2, HCl0–5 °CCl−NN+benzenediazonium chlorideCuCl, HClClchlorobenzene
Figure 9.36 Nitrobenzene → aniline → benzenediazonium chloride → chlorobenzene.

ii. Heat with aqueous ammonia and Cu₂O at 200 °C and 60 atm:
CX6HX5Cl+2 NHX3→200 °C, 60 atmCuX2OCX6HX5NHX2+NHX4Cl \ce{C6H5Cl + 2NH3 ->[Cu2O][\text{200 °C, 60 atm}] C6H5NH2 + NH4Cl}
iii. Heat with CuCN in pyridine to get benzonitrile, then hydrolyze it with hot dilute acid:

ClchlorobenzeneCuCNpyridineNbenzonitrileH3O+heatOHObenzoic acidClchlorobenzeneCuCNpyridineNbenzonitrileH3O+heatOHObenzoic acid
Figure 9.37 Chlorobenzene → benzonitrile → benzoic acid.

CX6HX5CN+2 HX2O+HX+→ΔCX6HX5COOH+NHX4X+ \ce{C6H5CN + 2H2O + H+ ->[\Delta] C6H5COOH + NH4+}
(Another way: the Wurtz–Fittig reaction with CH₃Cl gives toluene, which hot alkaline KMnO₄ oxidizes to benzoic acid.)
iv. Dow’s process: NaOH at 623 K and 300 atm gives sodium phenoxide, and dilute HCl gives phenol:
CX6HX5Cl+2 NaOH→300 atm623 KCX6HX5ONa+NaCl+HX2O,CX6HX5ONa+HCl→CX6HX5OH+NaCl \ce{C6H5Cl + 2NaOH ->[\text{623 K}][\text{300 atm}] C6H5ONa + NaCl + H2O}, \quad \ce{C6H5ONa + HCl -> C6H5OH + NaCl}