Skip to content

← Grade 12 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

19 questions

Unit 8 · Haloalkanes

B. Short answer questions

1.

Haloalkanes are halogen derivatives of hydrocarbons. The bond between carbon and halogen is covalent, but because of the electronegativity difference it is polar.

  • a.Why do haloalkanes have higher boiling points than their parent hydrocarbons?
  • b.Arrange these in order of decreasing boiling point: CH₃CH₂CH₂CH₂Cl, CH₃CH(CH₃)CH₂Cl, CH₃C(CH₃)₂Cl.
Answer

a. Two reasons. Dipole–dipole attraction: the C^δ+^–X^δ−^ bonds of neighboring molecules attract each other, a force the nearly non-polar alkanes don’t have. Stronger London forces: a haloalkane is much heavier and has many more electrons than its parent alkane (chloroethane 64.5 g/mol, ethane 30 g/mol), so its temporary dipoles are larger. More energy is needed to separate the molecules, so the boiling point is higher: chloroethane boils at 12 °C, ethane at −89 °C.

b. 1-chlorobutane (78 °C) > 1-chloro-2-methylpropane (69 °C) > 2-chloro-2-methylpropane (51 °C). All three are C₄H₉Cl, with the same mass. The more branched the molecule, the more compact and nearly spherical it is, the less surface it shares with its neighbors, and the weaker the London forces between them.

2.

Compounds with the same molecular formula but different structural arrangements are called isomers.

  • a.Write the possible isomers of the compound with molecular formula C₄H₉Cl.
  • b.Write the IUPAC names of all the isomers and identify their types.
  • c.Identify the chiral carbons in the isomers.
Answer

a. and b. Four structural isomers:

Structure IUPAC name Type
CH₃CH₂CH₂CH₂Cl 1-chlorobutane 1°, straight chain
CH₃CH₂CH(Cl)CH₃ 2-chlorobutane 2°, straight chain
(CH₃)₂CHCH₂Cl 1-chloro-2-methylpropane 1°, branched
(CH₃)₃CCl 2-chloro-2-methylpropane 3°, branched

1-Chlorobutane and 2-chlorobutane are position isomers (same chain, Cl in a different place); so are 1-chloro-2-methylpropane and 2-chloro-2-methylpropane. A straight-chain and a branched one are chain isomers. (The structures are drawn in Figure 8.6.)

c. Only 2-chlorobutane has a chiral carbon: C-2, which carries H, Cl, CH₃ and CH₂CH₃. So it exists as a pair of enantiomers (Figure 8.8), and C₄H₉Cl has five isomers in all if the two enantiomers are counted separately.

3.

Haloalkanes, like alcohols, are classified by the kind of carbon the functional group is attached to. Write the structural formula of each of these haloalkanes and classify it as primary, secondary or tertiary.

  • a.1-chloropropane
  • b.2-chloropropane
  • c.1-chlorobutane
  • d.2-chloro-2-methylpropane
Answer
  • a.CH₃CH₂CH₂Cl: Cl on a carbon bonded to one other carbon: primary (1°).
  • b.CH₃CH(Cl)CH₃: Cl on a carbon bonded to two other carbons: secondary (2°).
  • c.CH₃CH₂CH₂CH₂Cl: primary (1°).
  • d.(CH₃)₃C–Cl: Cl on a carbon bonded to three other carbons: tertiary (3°).
4.

Complete these reactions, naming the reagent in each:

  • a.CHX3CHX2OH→??+POClX3+? \ce{CH3CH2OH ->[?] ? + POCl3 + ?}
  • b.CHX3CHX2OH→??+HX3POX3 \ce{CH3CH2OH ->[?] ? + H3PO3}
  • c.CHX3CHX2OH→??+SOX2+? \ce{CH3CH2OH ->[?] ? + SO2 + ?}
  • d.CHX3CHX2Cl→??+KCl+? \ce{CH3CH2Cl ->[?] ? + KCl + ?}

The textbook prints d. as CH₂=CH₂ + HCl → ? + KCl + ?, which doesn’t work: ethene and HCl simply add to give chloroethane, and KCl comes only from the next step, alcoholic KOH turning chloroethane back into ethene. Part d. here is that step.

Answer
  • a.With phosphorus pentachloride: CHX3CHX2OH+PClX5→CHX3CHX2Cl+POClX3+HCl \ce{CH3CH2OH + PCl5 -> CH3CH2Cl + POCl3 + HCl}
  • b.With phosphorus trichloride (three molecules of ethanol): 3 CHX3CHX2OH+PClX3→3 CHX3CHX2Cl+HX3POX3 \ce{3CH3CH2OH + PCl3 -> 3CH3CH2Cl + H3PO3}
  • c.With thionyl chloride, in pyridine: CHX3CHX2OH+SOClX2→pyridineCHX3CHX2Cl+SOX2+HCl \ce{CH3CH2OH + SOCl2 ->[pyridine] CH3CH2Cl + SO2 + HCl}
  • d.With alcoholic KOH (elimination): CHX3CHX2Cl+KOH(alc)→ΔCHX2=CHX2+KCl+HX2O \ce{CH3CH2Cl + KOH(alc) ->[\Delta] CH2=CH2 + KCl + H2O}
5.

The boiling point of haloalkanes is affected by several factors. Explain the effect of each:

  • a.molecular mass
  • b.strength of the C–X bond
  • c.intermolecular forces
  • d.branching
Answer

a. Molecular mass: the heavier the molecule, the more electrons it has and the stronger its London forces, so the higher the boiling point, both along a series (CH₃Cl −24 °C, C₂H₅Cl 12 °C, C₃H₇Cl 47 °C) and from halogen to halogen (C₂H₅Cl 12 °C, C₂H₅Br 38 °C, C₂H₅I 72 °C).

b. Strength of the C–X bond: none directly. Boiling separates molecules from each other; it doesn’t break any bond inside them. It is the bond’s polarity that matters, because it gives the dipole–dipole attraction. In fact the weakest bond, C–I, belongs to the highest-boiling compounds, because of their size. (Bond strength matters for reactivity, not boiling point.)

c. Intermolecular forces: these are what boiling must overcome. Haloalkanes have dipole–dipole attractions and London forces, both stronger than in alkanes of similar size, so they boil higher; they can’t form hydrogen bonds, so they boil lower than alcohols of similar size (chloroethane 12 °C, propan-1-ol 97 °C).

d. Branching: isomers with more branching are more compact and spherical, with less surface in contact, so weaker London forces and a lower boiling point: 1-chlorobutane 78 °C, 2-chloro-2-methylpropane 51 °C.

6.

In nucleophilic substitution, a stronger nucleophile replaces a weaker one in a compound. The reaction can go by two mechanisms, unimolecular (SN1) or bimolecular (SN2). Identify the mechanism in each case and explain:

  • a.CHX3C(CHX3)X2Cl+KOH(aq)→CHX3C(CHX3)X2OH+KCl \ce{CH3C(CH3)2Cl + KOH(aq) -> CH3C(CH3)2OH + KCl}
  • b.CHX3CHX2Br+KOH(aq)→CHX3CHX2OH+KBr \ce{CH3CH2Br + KOH(aq) -> CH3CH2OH + KBr}
Answer

a. SN1. 2-Chloro-2-methylpropane is a tertiary haloalkane. Its three methyl groups block the back of the carbon, so SN2 is impossible, but they stabilize the carbocation. The C–Cl bond ionizes slowly to (CH₃)₃C⁺ and Cl⁻ (the rate-determining step), and OH⁻ then bonds to the carbocation fast. Rate = k[(CH₃)₃CCl], first order.

b. SN2. Bromoethane is a primary haloalkane. Its primary carbocation would be too unstable to form, but its carbon is open to attack from the back. OH⁻ attacks opposite the Br, and the C–O bond forms as the C–Br bond breaks, through one transition state. Rate = k[CH₃CH₂Br][OH⁻], second order.

7.

Arrange these compounds in decreasing order of reactivity towards SN2 reaction: CH₃Cl, CH₃CH₂Cl, (CH₃)₂CHCl.

Answer

CH₃Cl > CH₃CH₂Cl > (CH₃)₂CHCl (methyl > primary > secondary). In SN2 the nucleophile must reach the back of the carbon carrying Cl. Each methyl group in place of an H crowds that side more (steric hindrance) and also pushes electron density towards the carbon (+I), making it less δ+. So each step down the list is slower.

8.

Chloroethane is a primary haloalkane and can show nucleophilic substitution. Write its reactions with:

  • a.aqueous KOH
  • b.alcoholic KCN
  • c.NH₃
  • d.AgCN
Answer
  • a.Ethanol: CHX3CHX2Cl+KOH(aq)→CHX3CHX2OH+KCl \ce{CH3CH2Cl + KOH(aq) -> CH3CH2OH + KCl}
  • b.Propanenitrile (ethyl cyanide): CHX3CHX2Cl+KCN(alc)→CHX3CHX2CN+KCl \ce{CH3CH2Cl + KCN(alc) -> CH3CH2CN + KCl}
  • c.Ethanamine (with excess chloroethane, also diethylamine, triethylamine and tetraethylammonium chloride): CHX3CHX2Cl+NHX3(alc)→sealed tubeΔCHX3CHX2NHX2+HCl \ce{CH3CH2Cl + NH3(alc) ->[\Delta][sealed tube] CH3CH2NH2 + HCl}
  • d.Ethyl isocyanide: CHX3CHX2Cl+AgCN→CHX3CHX2NC+AgCl \ce{CH3CH2Cl + AgCN -> CH3CH2NC + AgCl}
9.

Complete these reactions:

  • a.CHX3CHX2Br+CHX3ONa→ \ce{CH3CH2Br + CH3ONa ->}
  • b.CHX3CHX2Br+NHX3→Δ \ce{CH3CH2Br + NH3 ->[\Delta]}
  • c.CHX3CHX2Br+KCN(alc)→ \ce{CH3CH2Br + KCN(alc) ->}
  • d.CHX3CHX2Br+AgNOX2(alc)→ \ce{CH3CH2Br + AgNO2(alc) ->}
  • e.CHX3CHX2Br+KNOX2(aq)→ \ce{CH3CH2Br + KNO2(aq) ->}
Answer
  • a.Methoxyethane (Williamson’s synthesis): CHX3CHX2Br+CHX3ONa→CHX3CHX2−O−CHX3+NaBr \ce{CH3CH2Br + CH3ONa -> CH3CH2-O-CH3 + NaBr}
  • b.Ethanamine: CHX3CHX2Br+NHX3→ΔCHX3CHX2NHX2+HBr \ce{CH3CH2Br + NH3 ->[\Delta] CH3CH2NH2 + HBr}
  • c.Propanenitrile: CHX3CHX2Br+KCN→CHX3CHX2CN+KBr \ce{CH3CH2Br + KCN -> CH3CH2CN + KBr}
  • d.Nitroethane: CHX3CHX2Br+AgNOX2→CHX3CHX2NOX2+AgBr \ce{CH3CH2Br + AgNO2 -> CH3CH2NO2 + AgBr}
  • e.Ethyl nitrite: CHX3CHX2Br+KNOX2→CHX3CHX2−O−N=O+KBr \ce{CH3CH2Br + KNO2 -> CH3CH2-O-N=O + KBr}
10.

In an elimination reaction a group of atoms is removed from a compound by a reagent, and the major product is decided by Saytzeff’s rule.

  • a.State Saytzeff’s rule.
  • b.Explain α,β-elimination with an example.
  • c.Identify the major product of the reaction between CH₃C(CH₃)₂CCl(CH₃)CH₃ and alcoholic KOH.
Answer

a. Saytzeff’s rule: in dehydrohalogenation, when there is a choice, the hydrogen is removed from the β carbon that carries fewer hydrogens, so the major product is the more substituted alkene, the one with more alkyl groups on the carbons of its double bond. Example: 2-bromobutane gives mainly but-2-ene (Figure 8.32).

b. In α,β-elimination the halogen leaves from the carbon it is on (the α carbon) and a hydrogen leaves from the neighboring carbon (the β carbon); the electrons of the C–H bond form a double bond between them. The reagent is hot alcoholic KOH, a strong base: CHX3CHX2CHX2Br+KOH(alc)→ΔCHX3CH=CHX2+KBr+HX2O \ce{CH3CH2CH2Br + KOH(alc) ->[\Delta] CH3CH=CH2 + KBr + H2O} The base takes the β-hydrogen as H⁺ (forming water), and Br leaves as Br⁻.

c. The compound is (CH₃)₃C–CCl(CH₃)–CH₃, 2-chloro-2,3,3-trimethylbutane. Its α carbon (C-2) has three neighbors: C-1 (a CH₃), the methyl branch on C-2 (another CH₃) and C-3, which carries three methyl groups and no hydrogen. So the H can only come from a CH₃ group, and the two CH₃ groups give the same alkene. There is only one product, 2,3,3-trimethylbut-1-ene, CH₂=C(CH₃)–C(CH₃)₃; Saytzeff’s rule doesn’t come into it, because there is no choice.

CH3CCH3CH3CCH3CH3Cl2-chloro-2,3,3-trimethylbutanealc. KOHheatCH2CCH3CCH3CH3CH32,3,3-trimethylbut-1-eneCH3CCH3CH3CCH3CH3Cl2-chloro-2,3,3-trimethylbutanealc. KOHheatCH2CCH3CCH3CH3CH32,3,3-trimethylbut-1-ene
Figure 8.43 The only alkene 2-chloro-2,3,3-trimethylbutane can give.
11.

When propene reacts with HCl, it gives 2-chloropropane rather than 1-chloropropane as the major product.

  • a.Name and state the rule that predicts this, with an example.
  • b.When HCl is replaced by HBr and an organic peroxide is present, the opposite product forms. Explain.
Answer

a. Markovnikov’s rule: when HX adds to an unsymmetrical alkene, the hydrogen goes to the carbon of the double bond that has more hydrogens, and X to the carbon with fewer. Example: CHX3CH=CHX2+HCl→CHX3CHClCHX3 \ce{CH3CH=CH2 + HCl -> CH3CHClCH3} , 2-chloropropane. The reason: H⁺ adds first, and adding it to the CH₂ end leaves the more stable secondary carbocation on the middle carbon, to which Cl⁻ then bonds.

b. This is the peroxide effect (Kharasch effect), anti-Markovnikov addition, giving 1-bromopropane: CHX3CH=CHX2+HBr→peroxideCHX3CHX2CHX2Br \ce{CH3CH=CH2 + HBr ->[peroxide] CH3CH2CH2Br} The peroxide makes free radicals, which take H from HBr and release bromine atoms. A Br atom (not H⁺) adds to the alkene first, at the CH₂ end, leaving the more stable secondary radical on the middle carbon; this radical takes an H atom from another HBr, giving 1-bromopropane and a new Br atom to continue the chain. Since bromine adds first, it ends up on the end carbon. Only HBr does this: H–Cl is too strong to give up its H atom to the radical, and iodine atoms are too unreactive to add.

12.

When a haloalkane is treated with sodium metal, dry ether is used as the solvent because sodium reacts with air and moisture. The reaction joins the carbons of two haloalkane molecules by removing their halogens.

  • a.Name this reaction and state it, with an example.
  • b.What is the major product when 2-chloropropane is treated with Na in dry ether?
Answer

a. The Wurtz reaction: a haloalkane heated with sodium in dry ether gives an alkane with twice its number of carbon atoms, two alkyl groups joining as R–R. Bromoethane gives butane: 2 CHX3CHX2Br+2 Na→dry etherCHX3CHX2CHX2CHX3+2 NaBr \ce{2CH3CH2Br + 2Na ->[dry ether] CH3CH2CH2CH3 + 2NaBr}

b. Two isopropyl groups join through their middle carbons, giving 2,3-dimethylbutane (not hexane: the groups join where the chlorine was): 2 (CHX3)X2CHCl+2 Na→dry ether(CHX3)X2CH−CH(CHX3)X2+2 NaCl \ce{2(CH3)2CHCl + 2Na ->[dry ether] (CH3)2CH-CH(CH3)2 + 2NaCl}

13.

Chloroform, a trihalogen compound, was once used as an anesthetic, but its use was given up because of its toxic effects.

  • i.Explain the principle of the laboratory preparation of chloroform from a. ethanol and b. acetone. How is it purified?
  • ii.Chloroform is stored in a dark bottle filled to the brim, with a little ethanol added. Explain why.
  • iii.How could you confirm the presence of phosgene in a sample of chloroform?
Answer

i. Both start with bleaching powder paste, which gives chlorine (an oxidizing and chlorinating agent) and calcium hydroxide (a base): CaOClX2+HX2O→Ca(OH)X2+ClX2 \ce{CaOCl2 + H2O -> Ca(OH)2 + Cl2} . The principle: a CH₃–C=O group is chlorinated to CCl₃–C=O, which hydroxide then cuts, the CCl₃ becoming CHCl₃ (the haloform reaction).

a. From ethanol: chlorine first oxidizes ethanol to ethanal, CHX3CHX2OH+ClX2→CHX3CHO+2 HCl \ce{CH3CH2OH + Cl2 -> CH3CHO + 2HCl} then chlorinates ethanal to chloral, CHX3CHO+3 ClX2→CClX3CHO+3 HCl \ce{CH3CHO + 3Cl2 -> CCl3CHO + 3HCl} and then Ca(OH)₂ hydrolyzes chloral: 2 CClX3CHO+Ca(OH)X2→2 CHClX3+(HCOO)X2Ca \ce{2CCl3CHO + Ca(OH)2 -> 2CHCl3 + (HCOO)2Ca}

b. From acetone no oxidation step is needed. Chlorine gives 1,1,1-trichloropropanone, CHX3COCHX3+3 ClX2→CClX3COCHX3+3 HCl \ce{CH3COCH3 + 3Cl2 -> CCl3COCH3 + 3HCl} which Ca(OH)₂ hydrolyzes: 2 CClX3COCHX3+Ca(OH)X2→2 CHClX3+(CHX3COO)X2Ca \ce{2CCl3COCH3 + Ca(OH)2 -> 2CHCl3 + (CH3COO)2Ca}

The mixture is warmed on a sand bath and the chloroform distills over, collecting under water (Figure 8.37). Purification: separate the chloroform layer (the lower one), wash it with dilute NaOH and then water, dry it over anhydrous CaCl₂, and redistill, collecting what boils at 60–62 °C.

ii. In air and light chloroform is slowly oxidized to poisonous phosgene: 2 CHClX3+OX2→light2 COClX2+2 HCl \ce{2CHCl3 + O2 ->[light] 2COCl2 + 2HCl} The dark bottle keeps out the light that drives the reaction; filling it to the brim leaves no air (oxygen) in it; and ethanol turns any phosgene that does form into harmless diethyl carbonate: COClX2+2 CX2HX5OH→(CX2HX5O)X2CO+2 HCl \ce{COCl2 + 2C2H5OH -> (C2H5O)2CO + 2HCl}

iii. Phosgene (and the HCl that forms with it, and when phosgene meets water) gives chloride ions; pure chloroform gives none, since its chlorines are bonded to carbon. Shake the sample with water and add silver nitrate solution: a white precipitate of AgCl shows that the chloroform has been oxidized and contains phosgene. Pure chloroform gives no precipitate.

14.

Chloroform takes part in several kinds of reactions. Show its reaction with each of these reagents:

  • i.concentrated HNO₃
  • ii.aqueous KOH
  • iii.silver powder
  • iv.acetone
  • v.phenol and KOH
  • vi.aniline and KOH
Answer
  • i.Chloropicrin (trichloronitromethane): CHClX3+HNOX3→ΔCClX3NOX2+HX2O \ce{CHCl3 + HNO3 ->[\Delta] CCl3NO2 + H2O}
  • ii.Potassium methanoate (formic acid on acidifying): CHClX3+4 KOH→boilHCOOK+3 KCl+2 HX2O \ce{CHCl3 + 4KOH ->[boil] HCOOK + 3KCl + 2H2O}
  • iii.Ethyne: 2 CHClX3+6 Ag→ΔHC≡CH+6 AgCl \ce{2CHCl3 + 6Ag ->[\Delta] HC#CH + 6AgCl}
  • iv.Chloretone: CHX3COCHX3+CHClX3→KOH(CHX3)X2C(OH)CClX3 \ce{CH3COCH3 + CHCl3 ->[KOH] (CH3)2C(OH)CCl3}
  • v.Reimer–Tiemann reaction, giving salicylaldehyde (formed as its potassium salt, freed by acid): CX6HX5OH+CHClX3+4 KOH→70 ∘Co-KOCX6HX4CHO+3 KCl+3 HX2O \ce{C6H5OH + CHCl3 + 4KOH ->[\pu{70 °C}] o-KOC6H4CHO + 3KCl + 3H2O} then o-KOCX6HX4CHO+HCl→o-HOCX6HX4CHO+KCl \ce{o-KOC6H4CHO + HCl -> o-HOC6H4CHO + KCl}
  • vi.Carbylamine reaction, giving phenyl isocyanide, with its foul smell: CX6HX5NHX2+CHClX3+3 KOH(alc)→warmCX6HX5NC+3 KCl+3 HX2O \ce{C6H5NH2 + CHCl3 + 3KOH(alc) ->[warm] C6H5NC + 3KCl + 3H2O}
15.

A little bromoethane in a test tube is warmed with aqueous NaOH. On the basis of what happens:

  • i.What type of reaction occurs?
  • ii.Write a balanced equation for the reaction.
  • iii.What functional group is present in the product?
Answer
  • i.Nucleophilic substitution (by SN2, since bromoethane is primary): OH⁻ replaces Br. The oily bromoethane, which at first lies under the solution, slowly disappears as the soluble product forms; acidifying with nitric acid and adding silver nitrate then gives a cream precipitate of AgBr, showing that bromide ions have been released.
  • ii.CHX3CHX2Br+NaOH(aq)→warmCHX3CHX2OH+NaBr \ce{CH3CH2Br + NaOH(aq) ->[warm] CH3CH2OH + NaBr}
  • iii.The hydroxyl group, –OH: the product, ethanol, is an alcohol.

C. Comprehensive questions

1.

An alcohol X reacts with HCl in the presence of anhydrous ZnCl₂ to form Y. Y undergoes dehydrohalogenation with alcoholic KOH to form Z. On ozonolysis, Z gives only acetaldehyde. Identify X, Y and Z.

Hint

Work backwards from Z: which alkene gives two molecules of the same two-carbon aldehyde when its double bond is cut?

Answer

Start with Z. Ozonolysis cuts a C=C bond and turns each end into C=O. Only ethanal (CH₃CHO) is formed, so the two halves are identical CH₃CH= units: Z is CH₃CH=CHCH₃, but-2-ene.

Then Y. But-2-ene comes from a chlorobutane by elimination. 2-Chlorobutane gives mainly but-2-ene (Saytzeff), while 1-chlorobutane could only give but-1-ene. So Y is CH₃CH₂CH(Cl)CH₃, 2-chlorobutane.

Then X. Lucas reagent turns an alcohol into the chloride with Cl where the OH was, so X is CH₃CH₂CH(OH)CH₃, butan-2-ol.

CHX3CHX2CH(OH)CHX3→HCl,  anhyd. ZnClX2CHX3CHX2CH(Cl)CHX3→Δalc. KOHCHX3CH=CHCHX3→2 ⋅ Zn/HX2O1 ⋅ OX32 CHX3CHO \ce{CH3CH2CH(OH)CH3 ->[HCl,\ anhyd{.} ZnCl2] CH3CH2CH(Cl)CH3 ->[alc{.} KOH][\Delta] CH3CH=CHCH3 ->[1. O3][2. Zn/H2O] 2CH3CHO}

2.

2-Bromopropane is placed in two test tubes. Aqueous KOH is added to one and alcoholic KOH to the other, and both are heated. Baeyer’s reagent (cold, dilute alkaline KMnO₄) is then used to test for unsaturation.

  • i.What difference in the products do you observe?
  • ii.How does Baeyer’s test help identify the type of reaction?
  • iii.Write the reactions in both cases.
Answer

i. With aqueous KOH, the product is an alcohol, propan-2-ol, which stays in solution. With alcoholic KOH, the product is an alkene, propene, a gas that bubbles off (it can be passed into the reagent).

ii. Propene has a C=C bond: it decolorizes the purple Baeyer’s reagent at once, leaving a brown precipitate of MnO₂, which shows an elimination has happened. Propan-2-ol is saturated: the reagent keeps its purple color (in a quick test, in the cold), which shows substitution.

iii. Aqueous KOH substitutes: CHX3CHBrCHX3+KOH(aq)→ΔCHX3CH(OH)CHX3+KBr \ce{CH3CHBrCH3 + KOH(aq) ->[\Delta] CH3CH(OH)CH3 + KBr}
Alcoholic KOH eliminates: CHX3CHBrCHX3+KOH(alc)→ΔCHX3CH=CHX2+KBr+HX2O \ce{CH3CHBrCH3 + KOH(alc) ->[\Delta] CH3CH=CH2 + KBr + H2O}
Baeyer’s test gives propane-1,2-diol: CHX3CH=CHX2+HX2O+[O]→cold, dil. alk. KMnO4CHX3CH(OH)CHX2OH \ce{CH3CH=CH2 + H2O + [O] ->[\text{cold, dil. alk. KMnO4}] CH3CH(OH)CH2OH}

3.

Ethanol is warmed gently with bleaching powder (CaOCl₂) paste, and the product is collected and identified.

  • i.What is the role of bleaching powder in the reaction?
  • ii.Write the balanced equation for the formation of chloroform.
  • iii.How can you confirm that the product contains chloroform?
Answer

i. With water, bleaching powder gives chlorine and calcium hydroxide, CaOClX2+HX2O→Ca(OH)X2+ClX2 \ce{CaOCl2 + H2O -> Ca(OH)2 + Cl2} . The chlorine is both the oxidizing agent (ethanol → ethanal) and the chlorinating agent (ethanal → chloral); the calcium hydroxide is the base that hydrolyzes chloral to chloroform.

ii. Step by step:
CHX3CHX2OH+ClX2→CHX3CHO+2 HCl \ce{CH3CH2OH + Cl2 -> CH3CHO + 2HCl}
CHX3CHO+3 ClX2→CClX3CHO+3 HCl \ce{CH3CHO + 3Cl2 -> CCl3CHO + 3HCl}
2 CClX3CHO+Ca(OH)X2→2 CHClX3+(HCOO)X2Ca \ce{2CCl3CHO + Ca(OH)2 -> 2CHCl3 + (HCOO)2Ca}
Adding them up for two molecules of ethanol, with the chlorine coming from bleaching powder and the HCl taken up by the calcium hydroxide, the overall equation is
2 CX2HX5OH+8 CaOClX2→2 CHClX3+(HCOO)X2Ca+5 CaClX2+2 Ca(OH)X2+2 HX2O \ce{2C2H5OH + 8CaOCl2 -> 2CHCl3 + (HCOO)2Ca + 5CaCl2 + 2Ca(OH)2 + 2H2O}

iii. Chloroform is a dense, colorless liquid that sinks under water, with a sweet smell. To confirm it, warm a few drops with aniline and alcoholic KOH (the carbylamine test, done by the teacher in a fume cupboard): the offensive smell of phenyl isocyanide shows chloroform. (It doesn’t give a precipitate with silver nitrate, since its chlorine is bonded to carbon.)

4.

Convert:

  • a.bromoethane to methane
  • b.chloroethane to 1-chloropropane
  • c.iodoethane to ethoxyethane
  • d.1-bromopropane to butanoic acid
  • e.chloromethane to acetyl chloride
Hint

a. and e. change the number of carbons by one: down (lose CO₂) or up (add a cyanide carbon). b. adds one carbon too, and a Grignard reagent with methanal does that while keeping an –OH to turn into –Cl.

Answer

a. Bromoethane (2 C) to methane (1 C): make the acid, then remove its carboxyl group.
CHX3CHX2Br→aq. KOHCHX3CHX2OH→KX2CrX2OX7/HX2SOX4CHX3COOH→NaOHCHX3COONa→ΔNaOH+CaOCHX4 \ce{CH3CH2Br ->[aq{.} KOH] CH3CH2OH ->[K2Cr2O7/H2SO4] CH3COOH ->[NaOH] CH3COONa ->[NaOH + CaO][\Delta] CH4}
(the last step is decarboxylation with soda lime).

b. Chloroethane (2 C) to 1-chloropropane (3 C): add one carbon with a Grignard reagent and methanal, then replace OH by Cl.
CHX3CHX2Cl→dry etherMgCHX3CHX2MgCl→2 ⋅ HX2O1 ⋅ HCHOCHX3CHX2CHX2OH→pyridineSOClX2CHX3CHX2CHX2Cl \ce{CH3CH2Cl ->[Mg][dry ether] CH3CH2MgCl ->[1. HCHO][2. H2O] CH3CH2CH2OH ->[SOCl2][pyridine] CH3CH2CH2Cl}

c. Iodoethane to ethoxyethane: make sodium ethoxide from part of the iodoethane, then Williamson’s synthesis.
CHX3CHX2I→aq. KOHCHX3CHX2OH→NaCHX3CHX2ONa \ce{CH3CH2I ->[aq{.} KOH] CH3CH2OH ->[Na] CH3CH2ONa}
CHX3CHX2ONa+CHX3CHX2I→CHX3CHX2−O−CHX2CHX3+NaI \ce{CH3CH2ONa + CH3CH2I -> CH3CH2-O-CH2CH3 + NaI}

d. 1-Bromopropane (3 C) to butanoic acid (4 C): the cyanide adds the fourth carbon, and hydrolysis turns it into –COOH.
CHX3CHX2CHX2Br→alc. KCNCHX3CHX2CHX2CN→ΔHX2O/HX+CHX3CHX2CHX2COOH \ce{CH3CH2CH2Br ->[alc{.} KCN] CH3CH2CH2CN ->[H2O/H+][\Delta] CH3CH2CH2COOH}

e. Chloromethane (1 C) to acetyl chloride (2 C): add a carbon as cyanide, hydrolyze to the acid, then make the acid chloride.
CHX3Cl→alc. KCNCHX3CN→ΔHX2O/HX+CHX3COOH→PClX5CHX3COCl \ce{CH3Cl ->[alc{.} KCN] CH3CN ->[H2O/H+][\Delta] CH3COOH ->[PCl5] CH3COCl}
(with POCl₃ and HCl as the other products of the last step; SOCl₂ also works).