Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
113 questions
Unit 9 · Chemistry of Non-Metals
Printable PDFs
- Study notes 2 pages
- Worksheet 5 pages Answer key
Exercise (9.1 Hydrogen)
B. Short answer questions
Hydrogen exists in three isotopic forms.
- a.Define isotope.
- b.What are the isotopes of hydrogen?
- c.List one use of each isotope of hydrogen.
- d.Which isotope of hydrogen is radioactive?
Answer
- a.Isotopes are atoms of the same element, with the same atomic number but different mass numbers, because they have different numbers of neutrons.
- b.Protium (¹₁H), deuterium (²₁H or D) and tritium (³₁H or T).
- c.Protium: hydrogenation of vegetable oil to make vanaspati ghee (or making ammonia). Deuterium: making heavy water for nuclear reactors (or as a tracer). Tritium: self-luminous watch dials and signs (or fusion research).
- d.Tritium.
Differentiate between:
- a.deuterium and tritium
- b.nascent hydrogen and atomic hydrogen
- c.ordinary water and heavy water
Answer
a.
| Deuterium | Tritium |
|---|---|
| ²₁H, one neutron | ³₁H, two neutrons |
| mass number 2, atomic mass 2.014 | mass number 3, atomic mass 3.016 |
| stable | radioactive (β emitter, half-life 12.3 years) |
| about 0.016% of natural hydrogen | about one atom in 10¹⁸ |
| used to make heavy water and as a tracer | used in luminous dials and fusion research |
b.
| Nascent hydrogen | Atomic hydrogen |
|---|---|
| made in the reaction mixture, at room temperature (Zn + dilute acid) | made by passing H₂ through an electric arc at low pressure |
| can’t be isolated at all | can be isolated for a fraction of a second |
| a weaker reducing agent | a stronger reducing agent |
| written [H] | written H |
c.
| Ordinary water | Heavy water |
|---|---|
| H₂O, molecular mass 18 | D₂O, molecular mass 20 |
| density 0.997 g/mL (25 °C) | density 1.104 g/mL |
| freezes at 0 °C, boils at 100 °C | freezes at 3.8 °C, boils at 101.4 °C |
| reacts at the normal rate | reacts more slowly |
| for drinking, cooking, cleaning | as moderator and coolant in nuclear reactors, as a tracer |
“Hydrogen fuel can serve as an alternative to petroleum.” Justify the statement.
Answer
- Hydrogen burns (or reacts in a fuel cell) with oxygen releasing a lot of energy: about 143 kJ per gram, nearly three times as much as petrol.
- Its only product is water, so it doesn’t give out CO₂, CO or smoke, unlike petrol and diesel.
- It can be made from water, which is everywhere, using electricity from hydropower, sun or wind, so unlike petroleum it need never run out.
- It already runs cars, buses, trucks and trains in fuel cells, which are about twice as efficient as petrol engines.
So hydrogen can do the job of petroleum as a fuel for transport, cleanly. (Its storage, cost and safety are the problems still being solved.)
What is heavy water? Write any four applications of heavy water.
Answer
Heavy water is deuterium oxide, D₂O: water whose hydrogen atoms are deuterium. Its molecular mass is 20, against 18 for ordinary water. It is made by the prolonged electrolysis of water.
Applications:
- as a moderator in nuclear reactors, to slow down fast neutrons;
- as a coolant in nuclear reactors;
- as a tracer for studying reaction mechanisms;
- to make deuterium and deuterium compounds (D₂, NaOD, deuterated solvents for NMR).
What is nascent hydrogen? Give any three chemical reactions to show that nascent hydrogen is a more powerful reducing agent than molecular hydrogen.
Answer
Nascent hydrogen [H] is hydrogen at the moment it is produced in a reaction mixture, for example by zinc and dilute sulphuric acid, which reacts before it can form H₂ molecules. It can’t be isolated.
It reduces these, which H₂ gas bubbled through the same solutions does not:
Mention an important use of each of the following:
a. atomic hydrogen b. heavy hydrogen c. nascent hydrogen d. heavy water e. tritium
Answer
- a.Atomic hydrogen: welding and cutting metals in the atomic hydrogen torch.
- b.Heavy hydrogen (deuterium): as a tracer in studying reaction mechanisms (and to make heavy water).
- c.Nascent hydrogen: as a reducing agent in the laboratory (reducing KMnO₄, nitrobenzene and other compounds).
- d.Heavy water: as a moderator in nuclear reactors.
- e.Tritium: the light source in self-luminous watch dials and signs (and fuel for fusion research).
What do you mean by isotopes? Give the main characteristics of isotopes.
Answer
Isotopes are atoms of the same element having the same atomic number but different mass numbers.
Characteristics:
- They have the same number of protons and electrons, but different numbers of neutrons.
- They have the same electronic configuration, so the same chemical properties.
- They have different atomic masses, so slightly different physical properties (density, melting and boiling points, rates of diffusion and reaction).
- They occupy the same place in the periodic table (“isotope” means “same place”).
- Some are stable and some radioactive (¹H and ²H stable, ³H radioactive).
C. Long answer questions
H₂, H and [H] are three different forms of hydrogen. Discuss their properties under these headings:
a. production b. reactivity c. stability d. reducing power
Answer
| Molecular hydrogen, H₂ | Atomic hydrogen, H | Nascent hydrogen, [H] | |
|---|---|---|---|
| a.Production | Zn + dilute HCl or H₂SO₄ (collected as gas); electrolysis of water; from natural gas | passing H₂ through an electric arc between tungsten electrodes at low pressure | in the reaction mixture, e.g. Zn + dilute H₂SO₄, with the substance to be reduced present |
| b.Reactivity | least reactive at room temperature (strong H–H bond, 436 kJ/mol) | most reactive (no bond to break) | more reactive than H₂, less than H |
| c.Stability | stable; can be stored in cylinders | unstable: half-life about 0.3 s, recombines to H₂ giving out heat | can’t exist outside the mixture; can’t be isolated |
| d.Reducing power | weak at room temperature (reduces CuO only when heated) | strongest: reduces CuO, FeCl₃, AgCl, CdS at room temperature | strong: reduces acidified KMnO₄, K₂Cr₂O₇ and FeCl₃, which H₂ doesn’t |
Some cars use hydrogen–oxygen fuel cells as an alternative source of energy.
- a.Discuss the major advantages of this fuel cell over other cells.
- b.What are the limitations of this fuel?
Answer
a. Advantages:
- It runs as long as hydrogen and oxygen are fed in; unlike a battery it never “runs down”, and refueling takes minutes, not hours of charging.
- It is efficient: about 40–60% of the reaction’s energy becomes electricity, against about 25–30% for a petrol engine.
- Its only product is water, so it gives out no CO₂, CO, NOₓ or smoke.
- It is quiet, with no moving parts, and gives a lot of energy for its mass.
b. Limitations:
- Hydrogen is difficult and costly to produce cleanly; most is still made from natural gas.
- It is hard to store and carry: it must be compressed (about 700 atm) or liquefied (−253 °C).
- It is highly flammable and forms explosive mixtures with air.
- Fuel cells need expensive catalysts such as platinum, and there are few hydrogen filling stations.
Complete the information about the isotopes of hydrogen in the table.
| Isotope of hydrogen | Number of neutrons | Atomic mass | Uses |
|---|---|---|---|
| Protium | |||
| 2 | |||
| 2 |
Answer
| Isotope of hydrogen | Number of neutrons | Atomic mass (amu) | Uses |
|---|---|---|---|
| Protium | 0 | 1.008 (about 1) | making ammonia, hydrogenating oils, rocket fuel |
| Tritium | 2 | 3.016 (about 3) | luminous watch dials, fusion research, radioactive tracer |
| Deuterium | 1 | 2.014 (about 2) | making heavy water, tracer studies, NMR solvents |
Match the items in column I with the relevant items in column II.
| Column I | Column II |
|---|---|
| a.Heavy water is used in | i.dihydrogen |
| b.Atomic hydrogen | ii.acidified KMnO₄ |
| c.Electrolysis of water produces | iii.nuclear reactors |
| d.Nascent hydrogen reduces | iv.recombines on a metal surface to produce a high temperature |
| e.Zn and dilute H₂SO₄ react to produce | v.hydrogen and oxygen |
Answer
- a.Heavy water is used in nuclear reactors (iii).
- b.Atomic hydrogen recombines on a metal surface to produce a high temperature (iv).
- c.Electrolysis of water produces hydrogen and oxygen (v).
- d.Nascent hydrogen reduces acidified KMnO₄ (ii).
- e.Zn and dilute H₂SO₄ react to produce dihydrogen (i): .
Atomic hydrogen combines with almost all elements, but molecular hydrogen does not. Explain.
Answer
In molecular hydrogen the two atoms are held by a strong H–H bond (436 kJ/mol). Before H₂ can react, this bond must be broken, so at ordinary temperatures most of its reactions are too slow to notice. Atomic hydrogen is already split: each atom has an unpaired electron and no bond to break, and it carries the 436 kJ/mol of energy absorbed when it was made. So it reacts at once with almost any element or compound it meets, and is a far stronger reducing agent.
How do normal water and heavy water differ? Write their applications.
Answer
| Normal water | Heavy water |
|---|---|
| H₂O, contains protium | D₂O, contains deuterium |
| molecular mass 18 | molecular mass 20 |
| density 0.997 g/mL at 25 °C | density 1.104 g/mL at 25 °C |
| melting point 0 °C, boiling point 100 °C | melting point 3.8 °C, boiling point 101.4 °C |
| reacts at the normal rate | reacts more slowly (isotope effect) |
| supports life | harmful to living things in large amounts |
Applications of normal water: drinking, cooking and farming; as a solvent; in industry for cooling and making steam; as the source of hydrogen by electrolysis.
Applications of heavy water: moderator and coolant in nuclear reactors; tracer for reaction mechanisms; making deuterium and deuterated compounds.
Exercise (9.2 Oxygen)
B. Short answer questions
Define the terms:
a. allotropy b. superoxide c. mixed oxide d. basic oxide e. neutral oxide
Answer
- a.Allotropy is the existence of an element in two or more forms that have different physical properties but the same chemical properties, e.g. O₂ and O₃, diamond and graphite.
- b.A superoxide is an oxide containing the superoxide ion, O₂⁻, in which oxygen has the oxidation state −½, e.g. KO₂.
- c.A mixed oxide is an oxide that behaves as a combination of two oxides of the same element in different oxidation states, e.g. Fe₃O₄ (FeO·Fe₂O₃), Pb₃O₄ (2PbO·PbO₂).
- d.A basic oxide is an oxide that gives an alkali with water and a salt and water with acids, e.g. Na₂O, CaO.
- e.A neutral oxide is an oxide that is neither acidic nor basic, reacting with neither acids nor bases, e.g. CO, NO, N₂O.
Give reasons:
- a.N₂O₅ is an acidic oxide whereas NO is neutral.
- b.OCl₂ is an oxide whereas OF₂ is not.
- c.100% oxygen is harmful to breathe.
- d.H₂O is a neutral oxide whereas H₂O₂ is a peroxide.
- e.CO₂ is an acidic oxide whereas Na₂O is a basic oxide.
Answer
- a.In N₂O₅ nitrogen is in its highest oxidation state, +5: it dissolves in water to give nitric acid, , and reacts with alkalis. NO, with nitrogen at +2, forms no acid with water and reacts with neither acids nor bases.
- b.An oxide is a compound in which oxygen is the more electronegative element (oxidation state negative). Oxygen is more electronegative than chlorine, so in OCl₂ oxygen is −2: it is an oxide (dichlorine monoxide). Fluorine is more electronegative than oxygen, so in OF₂ oxygen is +2 and the compound is a fluoride, oxygen difluoride.
- c.Breathed for long, pure oxygen forms too many reactive free radicals in the body, which damage the lungs (oxygen toxicity); it also makes fires burn fiercely. (See the answer in 9.2.4.)
- d.In H₂O each oxygen is bonded to hydrogens only, with the oxidation state −2: a normal oxide, and neutral. In H₂O₂ the two oxygens are bonded to each other in an –O–O– peroxide link, each with oxidation state −1.
- e.CO₂ is the oxide of a non-metal: it dissolves in water to give carbonic acid and reacts with bases (). Na₂O is the oxide of a reactive metal: it dissolves to give the alkali NaOH and reacts with acids ().
List some medical and industrial applications of oxygen.
Answer
Medical: life support for patients on ventilators; treating breathing difficulties in newborns (RDS), pneumonia, COPD and heart attacks; an antidote for CO poisoning; for climbers at high altitude.
Industrial: oxy-acetylene welding and cutting; steelmaking; sewage treatment and water purification; bleaching paper pulp; liquid oxygen as rocket fuel’s oxidizer; fuel cells.
What are oxides? Classify the following oxides into acidic, basic, neutral (and amphoteric), giving reasons: ZnO, Fe₃O₄, Al₂O₃, CuO, NO, CaO.
Answer
Oxides are binary compounds of oxygen with another, less electronegative element.
- Basic: CaO (dissolves to give Ca(OH)₂ and reacts with acids); CuO and Fe₃O₄ (insoluble, but react with acids to give salts and water; Fe₃O₄ is also a mixed oxide), e.g. and
- Amphoteric: ZnO and Al₂O₃, which react with both acids and bases (, ).
- Neutral: NO, which reacts with neither.
- Acidic: none of these.
Write a note on:
- a.oxides and their types
- b.hydrogen peroxide and its applications
Answer
- a.Oxides are binary compounds of oxygen with another element. By their chemical behavior they are acidic (non-metal oxides such as CO₂, SO₃, which give acids with water and react with bases), basic (metal oxides such as Na₂O, CaO, CuO, which give alkalis or react with acids), amphoteric (ZnO, Al₂O₃, PbO, BeO, which react with both) and neutral (CO, NO, N₂O, which react with neither). By their oxygen content they are normal oxides (O at −2), peroxides (O₂²⁻, O at −1, e.g. Na₂O₂, BaO₂), superoxides (O₂⁻, e.g. KO₂) and mixed oxides (Fe₃O₄, Pb₃O₄).
- b.Hydrogen peroxide, H₂O₂, is a pale blue liquid whose molecule has an open-book shape with an –O–O– link. It decomposes to water and oxygen (), so it is stored in dark bottles in a cool place. It is a strong oxidizing agent and is used as a bleach for silk, wool, hair and pulp, an antiseptic, to sterilize instruments, to treat wastewater, to clean earwax, as a rocket propellant, in tooth whiteners and acne creams, and to make organic peroxides.
Differentiate between:
- a.a peroxide and a superoxide
- b.an acidic oxide and a basic oxide
Answer
a.
| Peroxide | Superoxide |
|---|---|
| contains the peroxide ion O₂²⁻ | contains the superoxide ion O₂⁻ |
| oxidation state of oxygen −1 | oxidation state of oxygen −½ |
| diamagnetic (all electrons paired) | paramagnetic (one unpaired electron) |
| e.g. Na₂O₂, BaO₂, H₂O₂ | e.g. KO₂, RbO₂, CsO₂ |
| gives H₂O₂ with dilute acids | gives H₂O₂ and O₂ with water or acids |
b.
| Acidic oxide | Basic oxide |
|---|---|
| mostly oxides of non-metals | oxides of metals |
| gives an acid with water (SO₃ → H₂SO₄) | gives an alkali with water (Na₂O → NaOH), or is insoluble |
| reacts with bases to give salt and water | reacts with acids to give salt and water |
| e.g. CO₂, SO₂, P₂O₅ | e.g. Na₂O, CaO, CuO |
C. Long answer questions
Oxygen is the third most abundant element in the universe, and it readily forms oxides with other elements. Some are: SO₃, ZnO, CO, K₂O.
- a.Identify the acidic, basic, amphoteric and neutral oxides, with justification.
- b.Give two examples of peroxides.
Answer
a.
- SO₃ is acidic: , and .
- K₂O is basic: , and .
- ZnO is amphoteric: and .
- CO is neutral: it forms no acid with water and reacts with neither acids nor bases.
b. Sodium peroxide, Na₂O₂, and barium peroxide, BaO₂ (or hydrogen peroxide, H₂O₂).
Two allotropes of the same element are shown in Figure 9.8 and Figure 9.9.
- a.Why are they called allotropes?
- b.Write any two differences in their physical properties.
- c.Name the shape of the O₃ molecule.
Answer
- a.Both are forms of the same element, oxygen (O₂ and O₃), with different numbers of atoms in the molecule: they have different physical properties but the same chemical nature.
- b.O₂ is colorless and odorless; O₃ is pale blue with a pungent smell. O₂ liquefies at −183 °C; O₃ at −112 °C. (O₃ also absorbs UV-B and UV-C light strongly; O₂ doesn’t.)
- c.Bent (V-shaped), with a bond angle of about 117°.
The table shows the highest oxides of the elements of groups 1 to 17.
| 1 | 2 | 13 | 14 | 15 | 16 | 17 | |
|---|---|---|---|---|---|---|---|
| Period 2 | Li₂O | BeO | B₂O₃ | CO₂ | N₂O₅ | ||
| Period 3 | Na₂O | MgO | Al₂O₃ | SiO₂ | P₄O₁₀ | SO₃ | Cl₂O₇ |
| Period 4 | K₂O | CaO | Ga₂O₃ | GeO₂ | As₂O₅ | SeO₃ | Br₂O₅ |
| Period 5 | Rb₂O | SrO | In₂O₃ | SnO₂ | Sb₂O₅ | TeO₃ | I₂O₅ |
| Period 6 | Cs₂O | BaO | Tl₂O₃ | PbO₂ | Bi₂O₅ | PoO₃ |
The acidic character increases from left to right across a period, and the basic character increases down a group.
- a.Identify any two acidic, two basic and two amphoteric oxides from the table.
- b.Write chemical reactions to prove that ZnO is amphoteric.
- c.Give a reason why Na₂O is called a basic oxide.
- d.Name the most basic and the most acidic oxide in the table.
Answer
- a.Acidic: SO₃, Cl₂O₇ (also CO₂, N₂O₅, P₄O₁₀). Basic: Na₂O, CaO (also K₂O, BaO). Amphoteric: BeO, Al₂O₃ (also Ga₂O₃, SnO₂, PbO₂).
- b. (as a base) and (as an acid).
- c.It dissolves in water to give an alkali, , and reacts with acids to give a salt and water, .
- d.Most basic: Cs₂O (bottom left: the most metallic element). Most acidic: Cl₂O₇ (top right of those given, with chlorine in its highest oxidation state, +7).
(Oxygen and fluorine form no oxides: fluorine is more electronegative than oxygen, so OF₂ is a fluoride. Bromine’s and iodine’s highest stable oxides are Br₂O₅, which decomposes above about −20 °C, and I₂O₅; Br₂O₇ and I₂O₇ are not known.)
Write all the possible oxides of the following elements and classify them with reasons: a. N b. H c. C d. K e. Ba f. B
Answer
- a.Nitrogen: N₂O and NO (neutral: no acid, no reaction with bases); N₂O₃ (acidic, gives HNO₂); NO₂ and N₂O₄ (acidic, give HNO₂ + HNO₃); N₂O₅ (acidic, gives HNO₃).
- b.Hydrogen: H₂O (neutral, a normal oxide) and H₂O₂ (a peroxide, weakly acidic).
- c.Carbon: CO (neutral) and CO₂ (acidic, gives H₂CO₃). (C₃O₂, carbon suboxide, also exists.)
- d.Potassium: K₂O (basic, gives KOH), K₂O₂ (peroxide) and KO₂ (superoxide); all give KOH with water, so all are basic.
- e.Barium: BaO (basic, gives Ba(OH)₂) and BaO₂ (peroxide, gives H₂O₂ with acids).
- f.Boron: B₂O₃ (weakly acidic: , boric acid).
X and Y are two series of oxides:
X: SO₃, SiO₂, Cl₂O₇, P₂O₅
Y: Al₂O₃, CuO, Na₂O, MgO
- a.Which series is acidic and which is basic?
- b.Arrange the oxides of each series in order of increasing acidic or basic strength, with reasons.
Answer
- a.X is a series of acidic oxides (oxides of non-metals); Y of basic oxides (oxides of metals; Al₂O₃ is amphoteric, the least basic).
- b.X, increasing acidic strength: SiO₂ < P₂O₅ < SO₃ < Cl₂O₇. Across period 3 the non-metal becomes more electronegative and its oxidation state rises (+4, +5, +6, +7), so its oxide pulls electrons harder and gives a stronger acid (H₂SiO₃ is very weak, HClO₄ very strong).
Y, increasing basic strength: Al₂O₃ < CuO < MgO < Na₂O. The more electropositive (metallic) the metal, the more ionic its oxide and the more readily it gives OH⁻ ions: sodium is the most metallic, aluminium (amphoteric) the least.
Exercise (9.3 Ozone)
B. Short answer questions
Define the terms:
a. Freons b. allotropy c. ozone layer d. ODS
Answer
- a.Freons are chlorofluorocarbons: derivatives of methane and ethane with all their hydrogens replaced by chlorine and fluorine, such as CCl₂F₂, used as refrigerants and propellants.
- b.Allotropy is the existence of an element in two or more forms with different physical but the same chemical properties, such as O₂ and O₃.
- c.The ozone layer is the region of the stratosphere, about 15–35 km above the Earth, where ozone is most concentrated; it absorbs most of the Sun’s harmful UV rays.
- d.ODS (ozone-depleting substances) are compounds containing chlorine or bromine, such as CFCs, halons, CCl₄ and methyl bromide, that release those atoms in the stratosphere and destroy ozone.
What is ozone? Write its importance. How would you prepare ozone artificially?
Answer
Ozone, O₃, is a pale blue, pungent-smelling allotrope of oxygen, with three oxygen atoms in a bent molecule.
Importance: the ozone layer absorbs most of the Sun’s harmful UV rays, protecting life from skin cancer, cataracts and crop damage. Ozone is also used to sterilize water, air and instruments, to bleach, to preserve food and to make aldehydes and ketones.
Preparation: dry oxygen is passed slowly through Siemens’ ozonizer, two coaxial tin-foil-coated glass tubes connected to an induction coil. The silent electric discharge between them converts part of the oxygen into ozone: , ΔH = +284 kJ.
Differentiate between:
- a.Freon-12 and Freon-21
- b.dioxygen and trioxygen
Answer
a.
| Freon-12 | Freon-21 |
|---|---|
| CCl₂F₂, dichlorodifluoromethane | CHCl₂F, dichlorofluoromethane |
| no hydrogen: a CFC | one hydrogen: an HCFC |
| very stable; lasts about 100 years in the air, so does great ozone damage | breaks down more in the lower air (lasts a couple of years), so does less damage |
| used as a refrigerant and aerosol propellant | used as a refrigerant and solvent |
b.
| Dioxygen, O₂ | Trioxygen (ozone), O₃ |
|---|---|
| two atoms, linear | three atoms, bent (116.8°) |
| colorless, odorless | pale blue, pungent |
| stable, less reactive | unstable, highly reactive |
| weaker oxidizing agent | strong oxidizing agent |
| doesn’t absorb the Sun’s UV-B | absorbs UV-B and UV-C |
| liquefies at −183 °C | liquefies at −112 °C |
Write any four ozone-depleting substances (ODS).
Answer
- chlorofluorocarbons such as CCl₂F₂ (Freon-12) and CCl₃F (Freon-11);
- halons (bromine compounds used in fire extinguishers), such as CBrClF₂;
- carbon tetrachloride, CCl₄;
- methyl bromide, CH₃Br (a pesticide);
- also methyl chloroform (CH₃CCl₃) and HCFCs such as CHClF₂.
What is the main risk from the extra UV rays that reach the ground because of ozone layer depletion?
Answer
The main risk is to health: UV-B damages the DNA in skin cells, causing skin cancer (including melanoma), and also sunburn, cataracts and a weaker immune system. It also lowers crop yields and harms plankton, the base of ocean food chains.
How does ozone block the UV rays coming from the Sun?
Answer
An ozone molecule absorbs a UV photon (of wavelength below about 320 nm), and the photon’s energy splits it: . The oxygen atom soon joins an O₂ molecule to make ozone again, , giving out heat. So the ozone is constantly destroyed and remade, and the UV energy is turned into heat in the stratosphere instead of reaching the ground.
“Is ozone a greenhouse gas?” Give your opinion.
Answer
Yes. Ozone absorbs infrared radiation (at about 9.6 μm) given out by the Earth, as other greenhouse gases do. In the troposphere, ozone made by pollution is the third most important greenhouse gas made by people, after carbon dioxide and methane. But in the stratosphere, its main role is to absorb the Sun’s UV; losing stratospheric ozone in fact cools the Earth slightly. So ozone is a greenhouse gas, but the ozone hole and global warming are separate problems.
Write a note on:
- a.the mechanism of ozone layer depletion
- b.preventive measures of ozone layer depletion
Answer
- a.CFCs are so stable that they reach the stratosphere unchanged. There, UV light breaks a C–Cl bond and releases a chlorine atom: . The chlorine atom destroys ozone, , and the ClO gives up its oxygen to a free O atom, , freeing the chlorine to repeat the cycle. Overall , with chlorine as a catalyst; one chlorine atom can destroy about 100,000 ozone molecules. Over Antarctica, polar stratospheric clouds release extra chlorine each spring, making the hole.
- b.Stop using CFCs, halons and other ODS, as the Montreal Protocol requires; use refrigerants and propellants without chlorine; collect the gas from old refrigerators and air conditioners; avoid chlorine- and bromine-containing cleaning products and solvents; enforce laws against ODS; and raise public awareness.
Write the effects and control measures of ozone layer depletion.
Answer
Effects: more UV-B reaches the ground, causing sunburn, skin cancer, cataracts, faster aging of skin and a weaker immune system in people; lower growth and yields in crops; harm to plankton, fish larvae and aquatic food chains; disturbance of ecosystems.
Control measures: phase out CFCs, halons, CCl₄ and methyl bromide (Montreal Protocol); use chlorine-free refrigerants; collect and destroy old refrigerants; avoid ODS in solvents and cleaners; enforce laws; spread awareness.
C. Long answer questions
Oxygen is the third most abundant element in the universe. Its allotropes are O₂ and O₃.
- a.Draw the resonance structures of the ozone molecule.
- b.Why are both O–O bond lengths in ozone equal?
- c.Write any two chemicals responsible for destroying the ozone layer.
- d.What happens when ozone gas is passed through a starch-iodide solution?
Answer
- a.As in Figure 9.16: O=O⁺–O⁻ and ⁻O–O⁺=O, with a lone pair on the central oxygen, two-headed arrows between them.
- b.Because ozone is a resonance hybrid of the two structures: the double bond is not fixed on one side, its electrons are spread over both bonds. Each O–O bond is the same, about one and a half bonds, 127.8 pm long, between a single (148 pm) and a double bond (121 pm).
- c.CCl₂F₂ (Freon-12) and CCl₃F (Freon-11) (also halons, CCl₄, CH₃Br).
- d.Ozone oxidizes the iodide to iodine, , and the iodine turns the starch blue-black.
Study Figure 9.14 and answer:
- a.What does the picture show?
- b.Write the structure of ozone.
- c.In which layer of the atmosphere is the ozone layer?
- d.What happens when UV rays are not blocked by the ozone layer?
- e.Is ozone a greenhouse gas?
Answer
- a.The ozone layer in the stratosphere absorbing most of the ultraviolet rays coming from the Sun, so that only a little UV reaches the ground.
- b.A bent molecule of three oxygen atoms (bond angle 116.8°, both bonds 127.8 pm), a resonance hybrid of O=O⁺–O⁻ and ⁻O–O⁺=O (Figure 9.16).
- c.The stratosphere, about 15–35 km up.
- d.More UV-B reaches the ground: more sunburn, skin cancer, cataracts and weakened immunity in people, and harm to plants, crops and aquatic life.
- e.Yes: it absorbs the infrared radiation given out by the Earth. Ozone made by pollution near the ground adds to global warming. (See question 7.)
Exercise (9.4 Nitrogen)
B. Short answer questions
Give reasons:
- a.Ammonia turns moist red litmus paper blue.
- b.Concentrated nitric acid turns yellow-brown on long standing.
- c.Old electric bulbs were filled with nitrogen.
- d.Ammonia is highly soluble in water.
- e.Ammonia is a complexing agent.
Answer
- a.Ammonia dissolves in the water of the moist paper and gives hydroxide ions, ; the solution is basic, and bases turn red litmus blue.
- b.Nitric acid slowly decomposes in light, , and the brown NO₂ dissolves in the acid, coloring it yellow-brown.
- c.Nitrogen is inert (because of its strong N≡N bond), so it doesn’t react with the white-hot tungsten filament, which would burn out in air.
- d.Each ammonia molecule forms hydrogen bonds with water molecules (N–H···O and O–H···N), and a little of it reacts to form NH₄⁺ and OH⁻.
- e.The nitrogen in ammonia has a lone pair of electrons which it can donate to metal ions, forming coordinate bonds and complex ions such as [Cu(NH₃)₄]²⁺ and [Ag(NH₃)₂]⁺.
Differentiate between:
- a.active nitrogen and molecular nitrogen
- b.ammonia and nitric acid
Answer
a.
| Active nitrogen | Molecular nitrogen |
|---|---|
| free N atoms and excited N₂ molecules | ordinary N₂ molecules |
| made by an electric discharge through N₂ at low pressure | makes up 78% of the air |
| glows golden yellow | colorless, no glow |
| very reactive: combines with Hg, Zn, P, S at room temperature | inert at room temperature |
| short-lived | stable |
b.
| Ammonia | Nitric acid |
|---|---|
| NH₃, nitrogen at −3 (its lowest) | HNO₃, nitrogen at +5 (its highest) |
| a colorless gas | a colorless liquid |
| a weak base | a strong acid |
| a reducing agent | a strong oxidizing agent |
| made by Haber’s process | made by Ostwald’s process (from ammonia) |
| used for fertilizers, refrigeration | used for fertilizers, explosives, dyes |
Give a few large-scale applications of ammonia.
Answer
Making urea and other nitrogen fertilizers (ammonium sulphate, ammonium nitrate, DAP); making nitric acid by Ostwald’s process, and from it explosives, nylon and dyes; making washing soda by the Solvay process; as a refrigerant in ice plants and cold stores; in household cleaners.
Write your observation when ammonia gas is passed through or over:
- a.moist red litmus paper
- b.aqueous copper sulphate solution
- c.aqueous ferric chloride solution
- d.concentrated hydrochloric acid
- e.mercurous nitrate paper
Answer
- a.It turns blue (ammonia solution is basic).
- b.A pale blue precipitate of Cu(OH)₂ first, which dissolves in excess ammonia to give a deep blue solution of [Cu(NH₃)₄]SO₄.
- c.A reddish brown precipitate of Fe(OH)₃: .
- d.Dense white fumes of ammonium chloride: .
- e.The paper turns black, because of finely divided mercury:
Write a note on:
- a.the harmful effects of ammonia
- b.the ring test
- c.the oxidizing nature of nitric acid
- d.the basic nature of ammonia
Answer
- a.Ammonia is pungent, corrosive and toxic. It irritates and burns the eyes, nose, throat and lungs, causing coughing and, at high levels, blindness and lung damage; it causes nausea, dizziness and skin irritation; too much in the blood damages the brain; it may harm unborn children; small amounts in water kill fish; and in the air it helps form fine-particle haze.
- b.The ring test detects the nitrate ion. Freshly prepared FeSO₄ is added to the nitrate solution and concentrated H₂SO₄ is poured slowly down the side of the slanted tube. A brown ring of FeSO₄·NO forms at the junction: the acid gives HNO₃, which Fe²⁺ reduces to NO, and the NO combines with Fe²⁺. .
- c.In HNO₃ nitrogen is at +5, its highest state, so it can only be reduced: nitric acid is a strong oxidizing agent. It oxidizes metals (Cu + 4HNO₃ → Cu(NO₃)₂ + 2NO₂ + 2H₂O), non-metals (S + 6HNO₃ → H₂SO₄ + 6NO₂ + 2H₂O; C + 4HNO₃ → CO₂ + 4NO₂ + 2H₂O) and reducing compounds (H₂S to S, SO₂ to H₂SO₄, KI to I₂). It is reduced to NO₂, NO, N₂O, N₂ or NH₄NO₃ depending on its concentration and the metal.
- d.Ammonia’s nitrogen has a lone pair, which accepts a proton: . So its solution turns red litmus blue, it neutralizes acids to form ammonium salts (, ), and it precipitates metal hydroxides. It is a weak base (only partly ionized), a Brønsted and a Lewis base.
What happens when:
- a.mercurous nitrate paper comes in contact with ammonia?
- b.very dilute nitric acid is poured on magnesium?
- c.hot, concentrated nitric acid comes in contact with copper?
- d.sulphur dioxide is treated with concentrated nitric acid?
- e.concentrated hydrochloric acid is brought near ammonia?
Answer
- a.It turns black:
- b.Hydrogen gas is given off: .
- c.Brown fumes of NO₂ come off and a blue-green solution of copper nitrate forms: .
- d.It is oxidized to sulphuric acid: .
- e.Dense white fumes of ammonium chloride form: .
How does copper react with nitric acid under different conditions?
Answer
Copper is below hydrogen, so it can’t displace hydrogen; it reacts by the nascent oxygen route.
- With concentrated nitric acid it gives copper nitrate and brown nitrogen dioxide: .
- With dilute (moderately concentrated, 1 : 1) nitric acid it gives copper nitrate and colorless nitric oxide, which turns brown in air:
Give a reaction to show the acidic nature of nitric acid. How would you test for nitric acid in the laboratory? Give a balanced chemical equation.
Answer
Acidic nature: it neutralizes bases, , and gives CO₂ with carbonates,
Laboratory test: (i) with copper turnings, concentrated nitric acid gives brown fumes of NO₂ and a blue solution, ; (ii) the brown ring test: with freshly prepared FeSO₄ and concentrated H₂SO₄ poured down the side, a brown ring of FeSO₄·NO forms at the junction: then .
In what way does dilute nitric acid differ from other acids when it reacts with metals?
Answer
Dilute HCl and H₂SO₄ react with metals above hydrogen to give hydrogen gas (Zn + 2HCl → ZnCl₂ + H₂). Dilute nitric acid generally does not, because the nitrate ion is a stronger oxidizing agent than H⁺: it oxidizes the hydrogen to water and is itself reduced to NO, N₂O, N₂ or NH₄NO₃. (.) Only Mg and Mn give hydrogen, with very dilute acid. And dilute nitric acid also dissolves metals below hydrogen, such as copper and silver, which other dilute acids can’t.
Show your acquaintance with:
a. aqua fortis b. aqua regia
Answer
- a.Aqua fortis (“strong water”) is the old name of concentrated nitric acid, HNO₃, so called because it dissolves silver, copper and most other metals.
- b.Aqua regia (“royal water”) is a mixture of 1 volume of concentrated nitric acid with 3 volumes of concentrated hydrochloric acid. It dissolves gold and platinum, which neither acid dissolves alone: the nitric acid oxidizes the metal (with Cl₂ and NOCl formed from the two acids) and the chloride ions hold it in solution as [AuCl₄]⁻.
C. Long answer questions
Four test tubes (I–IV) each contain zinc and nitric acid under different conditions. Write the balanced equations when:
- a.I contains very hot, concentrated HNO₃;
- b.II contains moderately concentrated HNO₃;
- c.III contains cold, dilute HNO₃;
- d.IV contains cold, very dilute HNO₃.
Answer
- a. (brown NO₂)
- b.NO:
- c.N₂O:
- d.With no gas:
Mention any three important uses of nitric acid, and the property of nitric acid involved in each.
Answer
- Making fertilizers such as ammonium nitrate and calcium ammonium nitrate: its acidic nature (it neutralizes ammonia, ).
- Making explosives (TNT, nitroglycerine) and dyes and drugs by nitration of organic compounds: its ability to give the nitronium ion, NO₂⁺, with concentrated sulphuric acid.
- Etching and dissolving metals, refining gold and silver (as aqua regia), and passivating stainless steel: its oxidizing nature.
(Also: making nylon and plastics, cleaning metals, and testing gold in jewelers’ shops.)
- a.Dilute nitric acid is generally a typical acid, except in its reactions with metals. How does it differ from other mineral acids like H₂SO₄ and HCl when it reacts with metals?
- b.Write equations for the reactions of dilute and concentrated nitric acid with zinc.
Answer
- a.As in question 9: dilute HCl and H₂SO₄ give hydrogen with metals above hydrogen; dilute nitric acid usually gives oxides of nitrogen (NO, N₂O) or ammonium nitrate instead, because the nitrate ion oxidizes the hydrogen to water and is itself reduced. Only magnesium and manganese give hydrogen, with very dilute acid. Nitric acid also dissolves copper and silver, which the other dilute acids don’t.
- b.Concentrated: . Moderately concentrated: Dilute: Very dilute:
- a.Explain the brown ring test for the nitrate ion, with balanced equations.
- b.Why is freshly prepared ferrous sulphate solution used in the test?
Answer
a. To the nitrate solution, freshly prepared ferrous sulphate solution is added, then concentrated sulphuric acid is poured slowly down the side of the slanted test tube. The heavy acid forms a layer at the bottom, and a brown ring appears at the junction of the two layers. The acid forms nitric acid from the nitrate; Fe²⁺ reduces it to nitric oxide; and nitric oxide combines with Fe²⁺ to give brown nitroso ferrous sulphate.
b. Ferrous sulphate is oxidized by air to ferric sulphate over time; Fe³⁺ can neither reduce the nitrate nor form the brown complex, so a stale solution might give no ring.
You are given an unknown acid. How would you show that it is nitric acid? Write the balanced equations. Draw the Lewis structure of nitric acid and write one use.
Answer
- Add a few copper turnings: if it is (concentrated) nitric acid, brown fumes of NO₂ come off and the solution turns blue-green: . (No other common acid dissolves copper.)
- Brown ring test: add freshly prepared FeSO₄ solution to a little of the diluted acid, then pour concentrated H₂SO₄ down the side: a brown ring shows nitrate. .
- Lewis structure: as in Figure 9.27, H–O–N(=O)–O⁻ with a + charge on nitrogen; the double bond and the negative charge are shared by the two end oxygens (resonance).
- One use: making ammonium nitrate fertilizer (or explosives, dyes, aqua regia).
Complete the table.
| Species | HNO₃ | Gas produced | Reaction involved |
|---|---|---|---|
| Mg | very dilute | ||
| Zn | concentrated | ||
| Cu | concentrated | ||
| H₂S | dilute | ||
| C | hot, concentrated |
Answer
| Species | HNO₃ | Gas produced | Reaction involved |
|---|---|---|---|
| Mg | very dilute | H₂ | |
| Zn | concentrated | NO₂ | |
| Cu | concentrated | NO₂ | |
| H₂S | dilute | NO | |
| C | hot, concentrated | CO₂ and NO₂ |
(Carbon reacts only with hot, concentrated nitric acid.)
Study the flow chart and write balanced equations for the reactions X, Y and Z.
Mg₃N₂ ←(Z)– NH₃ –(X)→ NH₄Cl, and NH₄Cl –(Y)→ NH₃
Answer
- X (ammonia to ammonium chloride): .
- Y (ammonium chloride back to ammonia), by heating with a base (or with ):
- Z (ammonia to magnesium nitride), by passing ammonia over heated magnesium: . (In the reverse direction, magnesium nitride and water give ammonia: .)
Write the balanced equation for each of the following:
- a.adding ammonia solution to ferric chloride;
- b.adding excess ammonia to copper sulphate solution;
- c.adding ammonia to mercurous nitrate;
- d.adding phosphorus to hot, concentrated nitric acid;
- e.adding concentrated sulphuric acid and freshly prepared ferrous sulphate to nitric acid.
Answer
- a.Reddish brown:
- b. (deep blue; via the Cu(OH)₂ precipitate)
- c.The black solid:
- d.
- e. then , the brown ring.
Complete the table.
| Metal / non-metal | Concentration and temperature of HNO₃ | Products |
|---|---|---|
| Zn | Zn(NO₃)₂ + NH₄NO₃ + H₂O | |
| moderately concentrated | Zn(NO₃)₂ + NO + H₂O | |
| Fe | very dilute | |
| Cu(NO₃)₂ + NO₂ + H₂O | ||
| Mg | very dilute | |
| Zn(NO₃)₂ + N₂O + H₂O | ||
| C | concentrated |
Answer
| Metal / non-metal | Concentration and temperature of HNO₃ | Products |
|---|---|---|
| Zn | cold, very dilute | Zn(NO₃)₂ + NH₄NO₃ + H₂O |
| Zn (or Mg) | moderately concentrated | Zn(NO₃)₂ + NO + H₂O |
| Fe | cold, very dilute | Fe(NO₃)₂ + NH₄NO₃ + H₂O |
| Cu | concentrated | Cu(NO₃)₂ + NO₂ + H₂O |
| Mg | very dilute | Mg(NO₃)₂ + H₂ |
| Zn | cold, dilute | Zn(NO₃)₂ + N₂O + H₂O |
| C | hot, concentrated | CO₂ + NO₂ + H₂O |
Exercise (9.5 Halogens)
B. Short answer questions
Give reasons:
- a.HCl turns moist blue litmus paper red.
- b.Chlorine has a higher electron affinity than fluorine.
- c.Halogens are never found in the free state.
- d.HI is a better reducing agent than HCl.
- e.HF is soluble in water.
Answer
- a.HCl dissolves in the water on the paper and ionizes, ; the hydronium ions turn blue litmus red.
- b.Fluorine’s 2p subshell is very small and already holds seven electrons close together; an incoming electron is strongly repelled by them, so less energy is released than when chlorine’s larger, roomier 3p subshell takes one.
- c.They are very reactive (high electronegativity and electron affinity, weak X–X bonds), so they have combined with other elements, mostly metals, as halides.
- d.The H–I bond is much weaker than H–Cl, and the large I⁻ ion holds its electrons loosely, so HI gives up electrons (2I⁻ → I₂ + 2e⁻) much more easily: it reduces sulphuric acid, nitric acid and ferric salts, which HCl doesn’t.
- e.HF is a very polar molecule that forms hydrogen bonds with water molecules (F–H···O and O–H···F), so it mixes with water in all proportions.
Differentiate between:
- a.the oxidizing power of Cl₂ and Br₂
- b.the reducing power of HCl and HI
Answer
- a.Cl₂ is the stronger oxidizing agent: it is more electronegative, and Cl₂ + 2e⁻ → 2Cl⁻ releases more energy. So chlorine oxidizes bromide to bromine (), but bromine can’t oxidize chloride. Chlorine is a strong bleach; bromine only a mild one.
- b.HI is a much stronger reducing agent than HCl. HCl reduces only strong oxidizers (MnO₂, KMnO₄); HI also reduces concentrated H₂SO₄ to SO₂, nitric acid to NO₂, Fe³⁺ to Fe²⁺ and Cu²⁺ to Cu⁺. This is because the H–I bond is weaker and I⁻ loses its electron more easily.
An element X has the electronic configuration [Ne] 3s² 3p⁵.
- a.Identify the element X.
- b.Write the bleaching action of X₂.
- c.Write one method of preparing X₂.
- d.Write any two uses of X₂.
Answer
- a.Chlorine (atomic number 17).
- b.In the presence of moisture, chlorine forms hypochlorous acid, which gives nascent oxygen; this oxidizes colored substances to colorless ones: , , colored matter + [O] → colorless matter. The bleaching is permanent.
- c.By heating manganese dioxide with concentrated hydrochloric acid: .
- d.Disinfecting drinking water and swimming pools; bleaching paper and cotton; making PVC.
Give an example of each:
- a.the oxidizing action of chlorine
- b.the bleaching action of chlorine
- c.the reducing property of HI
- d.the acidic nature of a hydrohalic acid
- e.the disproportionation of chlorine
Answer
- a. (or ).
- b.A moist red flower in a jar of chlorine turns white: , , colored matter + [O] → colorless matter.
- c..
- d..
- e.: chlorine goes from 0 to −1 and +1.
Write a note on:
- a.the general characteristics of halogens
- b.the uses of haloacids
Answer
- a.Halogens (F, Cl, Br, I, At) have the valence configuration ns² np⁵ and exist as diatomic molecules. They have the highest electronegativities (F is the most electronegative element) and very high electron affinities (Cl the highest) and ionization energies in their periods, and the smallest radii. They show −1 oxidation state; except fluorine, also +1, +3, +5, +7. They are strong oxidizing agents (F₂ > Cl₂ > Br₂ > I₂) and the most reactive non-metals. Their melting and boiling points rise down the group (F₂ and Cl₂ gases, Br₂ a liquid, I₂ a solid), while electronegativity, ionization energy, oxidizing power and reactivity fall.
- b.HCl: laboratory reagent; preparing chlorine and chlorides; aqua regia; glue; cleaning metals; purifying salt. HBr: laboratory reagent; preparing bromides (KBr, AgBr for photography); brominating organic compounds. HI: a strong reducing agent; making iodides and iodine; medicine.
You are given three test tubes containing chloride, bromide and iodide solutions. Give a test to distinguish them.
Answer
Acidify each with dilute nitric acid and add silver nitrate solution:
- Chloride: a white precipitate of AgCl, soluble in dilute ammonia solution.
- Bromide: a pale yellow precipitate of AgBr, only slightly soluble in dilute ammonia (soluble in concentrated).
- Iodide: a yellow precipitate of AgI, insoluble even in concentrated ammonia.
; .
(Or add chlorine water and a little hexane and shake: bromide colors the hexane orange, iodide violet, chloride not at all.)
Hydrogen chloride gas can be produced by the action of concentrated H₂SO₄ on solid NaCl.
- a.Why is HBr not produced by the same method?
- b.What is the difference between hydrogen chloride gas and hydrochloric acid?
- c.Why is hydroiodic acid more acidic than hydrochloric acid?
- d.HCl is a covalent molecule but dissolves in water. Why?
Answer
- a.HBr is a stronger reducing agent than HCl: as it forms, it reduces the hot concentrated sulphuric acid to SO₂ and is itself oxidized to bromine, so impure, brown HBr results:
- b.Hydrogen chloride is the pure compound HCl, a covalent gas made of molecules, which doesn’t conduct electricity or turn dry litmus red. Hydrochloric acid is its solution in water, in which it is ionized into H₃O⁺ and Cl⁻: a strong acid that conducts electricity.
- c.The H–I bond is weaker and longer than H–Cl, so HI gives up its proton more easily; and the large I⁻ ion is more stable. So HI ionizes more completely.
- d.HCl is polar and reacts with water to form ions, , which water molecules hydrate.
Justify these statements:
- a.HBr is a better reducing agent than HCl.
- b.HBr cannot be prepared in the same way as HCl.
- c.HF has an abnormally high boiling point compared with the other hydrogen halides.
- d.HI is a stronger acid than HCl.
- e.Drying agents such as CaO and concentrated H₂SO₄ can’t be used to dry HBr and HI.
Answer
- a.The H–Br bond (366 kJ/mol) is weaker than H–Cl (431 kJ/mol), and Br⁻ loses its electron more easily, so HBr reduces concentrated sulphuric acid to SO₂, which HCl can’t.
- b.Because HBr, made from NaBr and concentrated sulphuric acid, reduces the acid to SO₂ and is oxidized to bromine (see 7a). It is made with phosphoric acid instead, or from bromine and moist red phosphorus.
- c.HF molecules are held together by strong hydrogen bonds (F is small and very electronegative), which must be broken to boil it; HCl, HBr and HI have only dipole and van der Waals forces. So HF boils at 20 °C, against −85 °C for HCl.
- d.As in 7c: the weaker H–I bond releases its proton more easily, and I⁻ is a more stable ion.
- e.CaO is a base: it reacts with the acids (), absorbing them. Concentrated H₂SO₄ is an oxidizing agent: it oxidizes them to Br₂ and I₂. They are dried with phosphorus pentoxide (P₂O₅) or anhydrous calcium chloride instead.
Write what you would observe in each case.
| Column I | Column II | Result |
|---|---|---|
| HCl | moist blue litmus paper | |
| HI | AgNO₃ | |
| HBr | Zn | |
| moist Cl₂ | red rose | |
| Cl₂ | hot, concentrated NaOH |
Answer
| Column I | Column II | Result |
|---|---|---|
| HCl | moist blue litmus paper | turns red |
| HI | AgNO₃ | yellow precipitate of AgI, insoluble in ammonia |
| HBr | Zn | hydrogen gas bubbles off: |
| moist Cl₂ | red rose | the rose is bleached white |
| Cl₂ | hot, concentrated NaOH | sodium chloride and sodium chlorate form: |
Silver nitrate solution followed by ammonia solution is used to distinguish Cl⁻ and Br⁻ ions. What would you observe for each? Write the balanced equations.
Answer
Cl⁻: a white curdy precipitate of AgCl, which dissolves readily in ammonia solution, giving a colorless solution: ; .
Br⁻: a pale yellow precipitate of AgBr, which dissolves only slightly in dilute ammonia (it needs concentrated ammonia): ; (only slightly, to the right).
- a.Write the balanced equation for the reaction of chlorine with cold, dilute sodium hydroxide.
- b.Write any two uses of the main product.
Answer
- a..
- b.Sodium hypochlorite, NaOCl, is used as household bleach (for cotton and laundry) and as a disinfectant for water, swimming pools, kitchens and hospitals.
- a.State and explain the trend of the boiling points of the halogens down the group.
- b.How does the electronegativity of the halogens vary down the group?
Answer
- a.The boiling points increase down the group: F₂ (−188 °C) < Cl₂ (−34 °C) < Br₂ (59 °C) < I₂ (184 °C). The molecules are non-polar, held together only by van der Waals (London) forces, which get stronger as the molecules get bigger and have more electrons. So F₂ and Cl₂ are gases, Br₂ a liquid and I₂ a solid.
- b.It decreases down the group, F (4.0) > Cl (3.2) > Br (3.0) > I (2.7), because the atoms get bigger and the bonding electrons are farther from the nucleus and more shielded from it.
C. Long answer questions
Compare the properties of HCl, HBr and HI.
Answer
| Property | HCl | HBr | HI |
|---|---|---|---|
| State and color | colorless gas | colorless gas | colorless gas |
| Boiling point | −85 °C | −67 °C | −35 °C |
| H–X bond energy | 431 kJ/mol | 366 kJ/mol | 298 kJ/mol |
| Thermal stability | most stable of the three | less | least (splits to H₂ and I₂ on heating) |
| Acid strength in water | strong | stronger | strongest |
| Reducing power | weak (only with MnO₂, KMnO₄) | moderate (also reduces conc. H₂SO₄) | strongest (also reduces Fe³⁺, Cu²⁺, HNO₃) |
| Preparation | NaCl + conc. H₂SO₄ | NaBr + H₃PO₄, or Br₂ + moist red P | NaI + H₃PO₄, or I₂ + red P + water |
| With AgNO₃ | white AgCl | pale yellow AgBr | yellow AgI |
Cl₂ is prepared by heating sodium chloride with concentrated sulphuric acid and MnO₂. Why can’t HBr and HI be prepared by heating bromide and iodide salts with concentrated sulphuric acid?
Answer
Because HBr and HI are strong reducing agents. As soon as they are formed from the salt and the acid, they reduce the hot concentrated sulphuric acid to sulphur dioxide (HI further, to S and H₂S), and are themselves oxidized to bromine and iodine:
So the gas obtained is impure and much of it is lost. (With MnO₂ added, this is in fact how bromine and iodine themselves are made.) HBr and HI are prepared with a non-oxidizing acid, phosphoric acid, instead: .
What happens when:
- a.excess chlorine gas reacts with ammonia?
- b.excess ammonia reacts with bromine?
- c.iodine reacts with sodium thiosulphate?
- d.bromine is added to moist red phosphorus?
Answer
- a.Nitrogen trichloride, an explosive yellow oil, forms: .
- b.Nitrogen gas is given off, with ammonium bromide: .
- c.Its brown color disappears, and sodium tetrathionate forms: .
- d.Hydrogen bromide is formed: .
Elements of group 17 are called halogens, which means salt-formers.
- a.Write one method of preparation of Cl₂.
- b.Write the action of Cl₂ with excess ammonia.
- c.How can you identify the presence of chloride? Explain with a reaction.
- d.Write the bleaching action of chlorine.
- e.Write the oxidizing character of chlorine with suitable examples.
Answer
- a. (or 2NaCl + 3H₂SO₄ + MnO₂ → 2NaHSO₄ + MnSO₄ + Cl₂ + 2H₂O).
- b.: nitrogen and white fumes of ammonium chloride.
- c.With silver nitrate (after dilute nitric acid), a white curdy precipitate of AgCl forms, soluble in ammonia solution: ; .
- d.; ; colored matter + [O] → colorless matter. It works only with moisture, and is permanent.
- e.Chlorine is a strong oxidizer: it oxidizes H₂S to sulphur (), SO₂ to sulphuric acid (), ferrous to ferric salts (), bromides and iodides to bromine and iodine (), and thiosulphate to sulphate ().
Halogens are very active non-metals.
- a.Write the silver nitrate test to distinguish Cl⁻, Br⁻ and I⁻.
- b.Why can’t HI be prepared by heating KI with concentrated H₂SO₄?
- c.Write the action of HI with: i. CuSO₄ solution ii. acidified K₂Cr₂O₇ iii. FeCl₃
Answer
- a.With AgNO₃ (in dilute HNO₃): Cl⁻ gives a white precipitate (AgCl) soluble in dilute ammonia; Br⁻ a pale yellow one (AgBr) slightly soluble in ammonia; I⁻ a yellow one (AgI) insoluble in ammonia.
- b.HI reduces the concentrated sulphuric acid to SO₂ (and S, H₂S) and is oxidized to iodine:
c.
- i.: a white precipitate of copper(I) iodide in a brown iodine solution.
- ii.Orange to green, with iodine liberated:
- iii.: yellow ferric to pale green ferrous, with iodine liberated.
In 1774 Scheele discovered chlorine by the action of hydrochloric acid on MnO₂; the name chlorine was suggested by Davy in 1810.
- a.What does the name chlorine mean?
- b.Write the two general reactions for the preparation of X₂ (X = Cl, Br, I).
- c.Write the action of iodine with hypo.
- d.Write any two applications of chlorine.
- e.How are X₂ (Cl₂, Br₂, I₂) tested in the laboratory?
Answer
- a.From the Greek chloros, “pale green” or “greenish yellow”, the color of the gas. (Scheele thought it was a compound containing oxygen; Davy showed in 1810 that it is an element.)
- b.By oxidizing halides, , or from their salts: and by displacement: , .
- c.: the brown iodine is decolorized.
- d.Disinfecting water and swimming pools; bleaching paper and textiles (also making PVC).
- e.Cl₂: greenish-yellow gas with a choking smell; bleaches moist litmus paper; turns moist starch-iodide paper blue-black. Br₂: red-brown liquid and vapor; turns starch-iodide paper blue-black; colors hexane orange. I₂: violet-black solid with violet vapor; turns starch solution blue-black.
A student made these observations in the chemistry laboratory:
| Experiment | Test | Observation |
|---|---|---|
| 1 | add iodine solution to sodium thiosulphate | the yellowish-brown color of iodine disappears |
| 2 | add silver nitrate solution to sodium chloride solution | a curdy white precipitate forms |
- a.Identify the substance responsible for the loss of the iodine’s color in experiment 1.
- b.Write the balanced equation for experiment 1.
- c.Write the formula of the curdy white precipitate in experiment 2.
- d.What would you see when excess ammonia solution is added to the white precipitate?
- e.Write the balanced equation for experiment 2.
Answer
- a.Sodium thiosulphate (hypo), Na₂S₂O₃, which reduces the iodine to colorless iodide.
- b..
- c.AgCl.
- d.The precipitate dissolves, giving a colorless solution of diamminesilver(I) chloride, [Ag(NH₃)₂]Cl.
- e..
Write the order of the hydrogen halides, with justification, for:
a. boiling point b. solubility c. reducing strength d. acidic strength
Answer
- a.HF > HI > HBr > HCl. HF has hydrogen bonds between its molecules; among the rest, the bigger the molecule, the stronger the van der Waals forces.
- b.All are extremely soluble; by mass, HI > HBr > HCl (HF mixes with water in all proportions, through hydrogen bonds). They are polar and react with water to form hydrated ions.
- c.HI > HBr > HCl > HF. The H–X bond weakens down the group, and the larger halide ions give up their electrons more easily.
- d.HI > HBr > HCl > HF. The weaker the H–X bond, the more easily the proton is released; the larger X⁻ ions are more stable. HF is a weak acid.
Exercise (9.6 Carbon)
B. Short answer questions
Define the following terms:
a. allotrope b. allotropy c. activated charcoal d. plant charcoal e. gas carbon
Answer
- a.An allotrope is one of the different forms of the same element that have different physical properties but the same chemical properties, e.g. diamond and graphite.
- b.Allotropy is the existence of an element in two or more such forms.
- c.Activated charcoal is charcoal heated to 800–1,000 °C with steam or chemicals to open up its pores, giving it a very large surface area and the highest adsorbing power.
- d.Plant charcoal (wood charcoal) is the porous amorphous carbon left when wood is heated in the absence of air.
- e.Gas carbon is the hard, dense carbon deposited on the walls of retorts in which coal is heated to make coal gas.
List the crystalline and amorphous allotropes of carbon.
Answer
Crystalline: diamond, graphite, fullerenes (also graphene and carbon nanotubes).
Amorphous: coal, coke, gas carbon, lamp black, charcoal (wood, animal and sugar charcoal, and activated charcoal).
Discuss the structure, properties and uses of diamond.
Answer
Structure: each carbon is sp³ hybridized and bonded to four others at the corners of a tetrahedron (C–C 154 pm, 109.5°), forming a rigid three-dimensional network.
Properties: the hardest natural substance; very high melting point; density 3.51 g/cm³; transparent, with a high refractive index (2.42) and a small critical angle (24.4°), so it sparkles; no free electrons, so it doesn’t conduct electricity (but conducts heat very well); insoluble in all solvents; chemically inert, burning to CO₂ only at about 900 °C; changes into graphite above 1,800 °C without air.
Uses: jewelry; cutting glass and diamond; drilling, grinding and polishing tools.
Both carbon and carbon monoxide are used as reducing agents. Which is the better reducing agent, and why?
Answer
In the blast furnace, carbon monoxide does most of the reducing. As a gas, it reaches every part of the solid ore, so it reacts much faster than solid carbon, which touches the ore only at a few points: . At very high temperatures (above about 1,000 °C), though, carbon becomes the stronger reducing agent thermodynamically, because its reaction to form CO makes more gas and becomes more and more favorable as the temperature rises; so carbon reduces oxides such as ZnO, which CO reduces only partly. (The Ellingham diagram in Grade 12 shows this.)
Give reasons:
- a.Graphite conducts electricity but diamond does not, though both are made of carbon.
- b.Charcoal is a better adsorbent than coal.
- c.CO is called a silent killer.
- d.Graphite is called a solid lubricant.
- e.C₆₀ is called a truncated icosahedron.
Answer
- a.In graphite each carbon uses only three electrons in bonding, and the fourth is delocalized over its layer, free to move. In diamond all four electrons are fixed in bonds.
- b.Charcoal is highly porous, with a very large surface area on which gases and colored molecules can be held; coal is dense, with far less surface.
- c.It is colorless, odorless and tasteless, so it can’t be detected by the senses; it binds to hemoglobin about 200 times more strongly than oxygen, so the victim is starved of oxygen and becomes drowsy, without warning.
- d.Its layers are held by weak van der Waals forces, so they slide over each other easily; it doesn’t burn or evaporate at high temperatures, so it lubricates where oil would burn.
- e.Its 60 carbon atoms sit at the corners of a shape made by cutting off the 12 corners of an icosahedron, giving 12 pentagonal and 20 hexagonal faces.
Differentiate between:
- a.diamond and graphite
- b.diamond and fullerene
- c.ordinary charcoal and activated charcoal
- d.coke and gas carbon
Answer
a.
| Diamond | Graphite |
|---|---|
| each C bonded to 4 others, sp³ | each C bonded to 3 others, sp² |
| 3-D tetrahedral network | 2-D hexagonal layers held by weak forces |
| hardest natural substance | soft and slippery |
| transparent, sparkling | gray-black, opaque, with a metallic luster |
| non-conductor of electricity | good conductor |
| density 3.51 g/cm³ | density 2.2 g/cm³ |
| used in jewelry and cutting tools | used in electrodes, pencils, lubricants |
b.
| Diamond | Fullerene |
|---|---|
| a giant covalent network | separate molecules (C₆₀, C₇₀…) |
| sp³ carbon | sp² carbon |
| insoluble in every solvent | soluble in organic solvents (benzene, toluene) |
| colorless, transparent, the hardest substance | black solid, magenta in solution |
| found in nature, mined | made in an electric arc (traces in soot) |
c.
| Ordinary charcoal | Activated charcoal |
|---|---|
| made by heating wood, bones or sugar without air | made by heating charcoal further with steam or chemicals at 800–1,000 °C |
| pores partly blocked by tarry matter | pores opened up |
| smaller surface area | very large surface area (500–1,500 m²/g) |
| used as fuel, adsorbent | used in filters, gas masks, removing poisons |
d.
| Coke | Gas carbon |
|---|---|
| the residue in the retort when coal is destructively distilled | the hard, dense deposit on the retort’s walls |
| porous, light | dense, hard |
| used as a fuel and reducing agent in metallurgy | used to make electrodes (dry cells) |
Show your acquaintance with the different types of charcoal and their uses.
Answer
- Wood (plant) charcoal, from heating wood without air: a fuel, an adsorbent, and a part of gunpowder.
- Animal charcoal (bone black), from heating bones or blood without air (about 10% carbon, the rest calcium phosphate): to decolorize sugar solution and purify organic compounds; to make superphosphate fertilizer.
- Sugar charcoal, from heating sugar without air (): the purest amorphous carbon.
- Activated charcoal, charcoal heated with steam or chemicals to open its pores: water filters, gas masks, removing poisons, decolorizing solutions, cleaning teeth.
Show your familiarity with the structure, properties and uses of fullerene.
Answer
Structure: C₆₀ is a hollow, football-shaped molecule of 60 sp² carbon atoms forming 12 pentagons and 20 hexagons (a truncated icosahedron), with single and double bonds. Other fullerenes: C₇₀, C₇₆, C₈₄.
Properties: a black solid, insoluble in water but soluble in benzene and toluene (magenta solution); a molecular, not a network, solid; a semiconductor, and with potassium (K₃C₆₀) a superconductor below about 18 K; made in an electric arc between graphite electrodes in helium.
Uses: superconductors, organic solar cells, medicine (drug carriers, antioxidants), cosmetics, lubricants for tiny machines.
At room temperature diamond is extremely unreactive, whereas graphite reacts more readily. Why?
Answer
In diamond every carbon atom is held by four strong bonds in a compact, rigid network: there is no easy way for a reagent to get in, and every reaction must break strong C–C bonds. In graphite the layers are held only weakly, so reagents can slip between the layers (potassium, bromine, sulphuric acid and fluorine form “intercalation” compounds there), and the delocalized electrons at the edges of the layers are easy to attack. Graphite is also the more stable form, but it reacts faster because it is more open. (For example, graphite burns at a lower temperature than diamond, and is oxidized by hot concentrated nitric acid, which doesn’t touch diamond.)
Compare the structures of diamond and graphite.
Answer
| Diamond | Graphite |
|---|---|
| each carbon sp³, bonded to four others | each carbon sp², bonded to three others |
| bond angle 109.5° (tetrahedral) | bond angle 120° (trigonal planar) |
| C–C 154 pm | C–C 142 pm within a layer; layers 335 pm apart |
| a three-dimensional network, strong bonds in every direction | two-dimensional hexagonal sheets, held to each other by weak van der Waals forces |
| no free electrons | one delocalized electron per carbon |
C. Long answer questions
- a.Give any two reactions showing the reducing nature of CO.
- b.What happens when CO gas is:
- i.heated with cobalt?
- ii.warmed with Tollens’ reagent?
- iii.heated with sulphur?
Answer
a. ; .
b.
- i.Dicobalt octacarbonyl forms (under pressure): .
- ii.A silver mirror (or black precipitate of silver) forms:
- iii.Carbonyl sulphide forms: .
Study the allotropes of carbon in Figure 9.35 (diamond, graphite and fullerene) and answer:
- a.Which allotrope is the hardest, and why?
- b.Which allotrope is the most reactive, and why?
- c.Which allotrope is a good conductor of electricity, and why?
- d.How is fullerene made?
- e.What is the hybridization in diamond and graphite?
Answer
- a.Diamond: each carbon atom is held by four strong covalent bonds in a rigid three-dimensional network, so the crystal resists being scratched or deformed in every direction.
- b.Fullerene: it is the least stable of the three (its curved cage strains its bonds), and its double bonds react easily, adding hydrogen, halogens, metals and other groups. (Of diamond and graphite, graphite reacts more easily, as in question 9.)
- c.Graphite: one electron of each carbon atom is delocalized over its layer and free to move.
- d.By striking an electric arc (or firing a laser) at graphite in an atmosphere of helium; the fullerenes are dissolved out of the soot with benzene or toluene.
- e.Diamond sp³; graphite sp².
CO is called a silent killer, but it does no long-term ecological damage, and it is widely used. List some uses of CO.
Answer
As a reducing agent in metallurgy (the blast furnace); in water gas and producer gas, as fuels; in purifying nickel (Mond’s process); in making methanol (CO + 2H₂ → CH₃OH) and other chemicals from syngas; in making phosgene, for plastics such as polycarbonates and polyurethanes.
Diamond and graphite are both allotropes of carbon. Study their structures and answer:
- a.Why is graphite softer than diamond?
- b.What is the hybridization of carbon in graphite and in diamond?
- c.Graphite is a good conductor of electricity, but diamond is not. Why?
- d.Write two uses of each.
Answer
- a.Graphite’s layers are held to each other only by weak van der Waals forces, so they slide over each other easily; in diamond, strong covalent bonds hold every atom in every direction.
- b.Graphite sp²; diamond sp³.
- c.In graphite the fourth valence electron of each carbon is delocalized and free to move along the layer; in diamond all four are fixed in bonds.
- d.Graphite: electrodes, pencils (also lubricants, crucibles). Diamond: jewelry, cutting and drilling tools.
Exercise (9.7 Phosphorus)
B. Short answer questions
Name the allotropes of phosphorus. Which allotrope is used to make matches, and which was used in rat poison?
Answer
White (yellow), red, black, violet and scarlet phosphorus. Red phosphorus is used on the striking strip of safety matchboxes; white phosphorus was used in rat poison.
Why is white phosphorus kept under water? What happens when the gas produced by boiling white phosphorus with caustic soda is passed through copper sulphate solution?
Answer
White phosphorus catches fire in air at about 30 °C (its strained P₄ molecules react easily with oxygen), but it doesn’t react with water and doesn’t dissolve in it. So it is kept under water to keep air away from it.
The gas is phosphine. Passed through copper sulphate solution, it gives a black precipitate of copper phosphide: .
Write any two methods of preparing phosphine gas. Write its uses.
Answer
- Heating white phosphorus with concentrated caustic soda in an inert atmosphere: .
- Adding water to calcium phosphide: (or phosphonium iodide with KOH: ).
Uses: in Holmes’ signals; for smoke screens; as a reducing agent; to make phosphorus compounds; as a grain fumigant; to dope silicon in semiconductors.
What is a Holmes’ signal? How is it produced? Write its significance.
Answer
A Holmes’ signal is a container of calcium carbide and calcium phosphide which, pierced and thrown into the sea, gives a self-lighting flare. Water reacts with them, giving acetylene and phosphine: , . The phosphine catches fire by itself and lights the acetylene, which burns brightly for a long time. It is used to signal ships, and to mark a place at sea, for example for rescuing people overboard.
Exercise (9.8 Sulphur)
B. Short answer questions
Define the terms polymorphism and allotropy. List the allotropes of sulphur.
Answer
Polymorphism is the existence of a substance (an element or a compound) in two or more crystalline forms, e.g. rhombic and monoclinic sulphur, or calcite and aragonite (CaCO₃).
Allotropy is the existence of an element in two or more forms, in the same physical state, with different physical but the same chemical properties, e.g. diamond and graphite, O₂ and O₃.
Allotropes of sulphur: crystalline, rhombic (α) and monoclinic (β); amorphous, plastic (γ), colloidal, and milk of sulphur.
Show that sulphuric acid is a diprotic acid. Write the action of pure sulphuric acid on blue and red litmus paper.
Answer
It gives two H⁺ per molecule, in two steps, and , so it forms two series of salts: and .
Pure (100%, water-free) sulphuric acid contains almost no H₃O⁺ ions, since acids ionize only in water, so on dry litmus it shows no acid color change; instead it chars the litmus paper black, dehydrating its cellulose. Red litmus stays red (it is not a base). On moist blue litmus, the water lets it ionize, and the paper turns red before charring.
Write the formula of hypo. Mention some uses of sulphur.
Answer
Hypo is sodium thiosulphate, Na₂S₂O₃·5H₂O.
Uses of sulphur: making sulphuric acid; gunpowder and matches; vulcanizing rubber; fungicides and insecticides; medicines (skin ointments), dyes and explosives; making the bisulphites used in paper making.
Give reasons:
- a.SO₂ acts as an oxidizing as well as a reducing agent.
- b.H₂S acts as a reducing agent.
- c.H₂SO₄ acts as an oxidizing agent.
- d.H₂SO₄ is a dehydrating agent.
Answer
- a.The sulphur in SO₂ is at +4, between its highest (+6) and lowest (−2) states, so it can be oxidized (to H₂SO₄, acting as a reductant) or reduced (to S, acting as an oxidant): ; .
- b.Its sulphur is in its lowest state, −2; it can only lose electrons (be oxidized), usually to sulphur: .
- c.Its sulphur is in its highest state, +6; it can only gain electrons (be reduced), to SO₂: .
- d.Concentrated sulphuric acid has a very strong affinity for water: it forms hydrates with it, giving out much heat, and takes hydrogen and oxygen out of compounds in the ratio of water: .
Differentiate between:
- a.the bleaching actions of Cl₂ and SO₂
- b.the acidic natures of SO₂ and H₂SO₄
Answer
a.
| Bleaching by Cl₂ | Bleaching by SO₂ |
|---|---|
| by oxidation: , | by reduction: |
| permanent | temporary: the color returns in air |
| strong: used for cotton, linen, wood pulp | mild: used for delicate wool, silk, straw, flowers |
| damages delicate fibers | doesn’t damage them |
b.
| SO₂ | H₂SO₄ |
|---|---|
| an acidic oxide (anhydride), not itself an acid; it gives an acid with water: | itself an acid |
| its acid, H₂SO₃, is weak and only partly ionized | a strong acid, its first ionization complete |
| its acid exists only in solution and loses SO₂ on boiling | non-volatile and stable |
| gives sulphites and bisulphites | gives sulphates and bisulphates |
Describe the preparation of H₂S gas with Kipp’s apparatus. How would you confirm the acidic nature of hydrogen sulphide gas?
Answer
Lumps of iron(II) sulphide are put in the middle bulb (B) of a Kipp’s apparatus, and dilute sulphuric acid is poured into the top bulb (A); it runs down the stem into the bottom bulb (C) and rises into B. Where it touches the FeS, H₂S forms: . The gas is drawn off through the tap on B. When the tap is closed, the gas pressure pushes the acid back down out of B and up into A, and the reaction stops until the tap is opened again.
Acidic nature: H₂S turns moist blue litmus paper (faintly) red, and it reacts with bases to give salts: .
Explain the working principle of Kipp’s apparatus. Write its significance.
Answer
Principle: the gas made in the middle bulb, if not let out, pushes the liquid away from the solid by its pressure, and so stops its own production. With the tap open, the acid stays in contact with the solid and gas forms. With the tap closed, the gas pressure in B rises, pushes the acid down through C and up into A, and the acid loses contact with the solid. Opening the tap releases the gas; the acid falls back from A and the reaction starts again.
Significance: it gives a supply of gas on demand (intermittent), without waste and without having to set up apparatus each time, which is needed in the qualitative analysis of salts, where H₂S is used again and again in small amounts. It works for any gas made from a lump solid and a liquid without heating (H₂S, H₂, CO₂).
What happens when H₂S gas is passed through:
- a.acidified KMnO₄?
- b.copper sulphate solution in acidic medium?
- c.SO₂ gas?
- d.concentrated sulphuric acid?
- e.acidified lead acetate solution?
Answer
- a.The purple color disappears and sulphur separates:
- b.A black precipitate of copper sulphide forms: .
- c.(With moisture) yellow sulphur is deposited: .
- d.It is oxidized to sulphur, and SO₂ is given off: .
- e.A black precipitate of lead sulphide forms:
Write notes on:
- a.the use of H₂S as an analytical reagent
- b.the bleaching action of SO₂
- c.the dehydrating property of H₂SO₄
- d.SO₂ as an oxidizing and a reducing agent
Answer
- a.H₂S precipitates many metal ions as sulphides of different solubility and color. In acidic solution (dil. HCl), where little S²⁻ forms, only the least soluble sulphides precipitate: group II, Cu²⁺ (CuS black), Pb²⁺ (PbS black), Cd²⁺ (CdS yellow), Sb³⁺ (Sb₂S₃ orange). In ammoniacal solution, more S²⁻ forms and group IV precipitates: Zn²⁺ (ZnS white), Mn²⁺ (MnS flesh), Ni²⁺ and Co²⁺ (black). So the cations of a salt can be separated into groups and identified.
- b.Moist SO₂ gives nascent hydrogen, , which reduces colored matter to colorless products; with some dyes SO₂ adds on directly. The bleaching is temporary: air oxidizes the product back and the color returns. SO₂ is a mild bleach for wool, silk, straw and flowers.
- c.Concentrated H₂SO₄ has a strong affinity for water. It dries gases; it removes water of crystallization (blue CuSO₄·5H₂O → white CuSO₄); and it removes hydrogen and oxygen as water from compounds: sugar → carbon (), formic acid → CO, oxalic acid → CO + CO₂. It chars skin, paper and wood.
- d.S in SO₂ is +4. As a reducing agent (usual, in water) it is oxidized to +6: it decolorizes acidified KMnO₄, turns acidified K₂Cr₂O₇ green, reduces Fe³⁺ to Fe²⁺ and halogens to HX: . As an oxidizing agent, with stronger reductants, it is reduced to S: , .
List the uses of SO₂ gas.
Answer
Making sulphuric acid; bleaching paper pulp, sugar, wool, silk, straw; preserving wine, dried fruit and juices; as a disinfectant and fungicide (fumigation); liquid SO₂ as a solvent; as an antichlor; making calcium bisulphite for paper making.
Why is sulphuric acid called the “king of chemicals”? List the uses of sulphuric acid.
Answer
Because it is made in larger amounts than any other chemical and is used, directly or indirectly, in almost every industry; a country’s consumption of it was long a measure of its industrial development.
Uses: making fertilizers (superphosphate, ammonium sulphate); making other chemicals (HCl, HNO₃, sulphates, detergents, dyes, drugs, explosives); in lead-acid car batteries; refining petroleum; pickling (cleaning) iron and steel before galvanizing; as a drying and dehydrating agent in the laboratory; as a laboratory reagent.
Write the molecular formula of sodium thiosulphate and mention some of its uses.
Answer
Na₂S₂O₃ (crystals Na₂S₂O₃·5H₂O, hypo). Uses: in iodine titrations (); as an antichlor; as a fixer in photography (dissolves unexposed AgBr).
Write reactions to show sulphuric acid as:
- a.an oxidizing agent
- b.a dehydrating agent
- c.an acid
Answer
- a. or, with carbon, .
- b.
- c. (or ).
What happens when a moist red petal of a flower is kept in a jar full of SO₂ gas?
Answer
The petal turns colorless: moist SO₂ gives nascent hydrogen (), which reduces the red coloring matter to a colorless product. Taken out and left in the air, the petal slowly regains its red color, as oxygen oxidizes the product back: SO₂’s bleaching is temporary.
Write the action of concentrated H₂SO₄ on:
- a.sugar
- b.P₄
- c.S₈
- d.copper turnings
Answer
- a.It chars it to carbon: .
- b.(Hot) it oxidizes phosphorus to phosphoric acid:
- c.(Hot) it oxidizes sulphur to SO₂: (that is, ).
- d.(Hot) copper dissolves, giving a blue solution, and SO₂ is given off: .
Write the action of H₂S on:
- a.KMnO₄ (acidified)
- b.K₂Cr₂O₇ (acidified)
- c.moist Cl₂
- d.SO₂
- e.FeCl₃
Answer
- a.Purple → colorless, and sulphur separates:
- b.Orange → green:
- c..
- d..
- e. (yellow → pale green).
C. Long answer questions
Look at the Kipp’s apparatus in the widget above (9.8.2), set with its tap closed, and answer:
- a.Identify the apparatus and write one advantage of it.
- b.Identify the parts A, B and C.
- c.Write the balanced chemical equation for the reaction in it, used to make H₂S.
- d.With its tap closed, where is the acid? Is the reaction going on?
- e.Give one use of the gas it releases.
Answer
- a.Kipp’s apparatus. Advantage: it gives the gas on demand (intermittently), without waste, stopping by itself when the tap is closed.
- b.A: the top bulb with a long stem, the acid reservoir; B: the middle bulb, holding the lumps of FeS, with the gas outlet and tap; C: the bottom bulb, into which the stem of A opens.
- c..
- d.The gas pressure has pushed the acid out of B, down into C and up the stem into A, so it no longer touches the FeS, and the reaction has stopped.
- e.As a reagent in the qualitative analysis of basic radicals (or as a reducing agent).
Complete the table with the balanced chemical equations.
| Reactant A | Reactant B | Products |
|---|---|---|
| ……… | H₂S | PbS + CH₃COOH |
| H₂S | K₂Cr₂O₇ + H₂SO₄ | ……… |
| Cl₂ | SO₂ (and water) | ……… |
| SO₂ | ……… | FeO + FeS |
| ……… | H₂SO₄ | CO + CO₂ + H₂O |
| H₂SO₄ | HNO₃ | ……… |
| SO₃ | ……… | H₂S₂O₇ |
| Cu²⁺ | H₂S (acidic medium) | ……… |
Answer
| Reactant A | Reactant B | Products |
|---|---|---|
| (CH₃COO)₂Pb (lead acetate) | H₂S | PbS + 2CH₃COOH |
| 3H₂S | K₂Cr₂O₇ + 4H₂SO₄ | K₂SO₄ + Cr₂(SO₄)₃ + 7H₂O + 3S |
| Cl₂ | SO₂ + 2H₂O | H₂SO₄ + 2HCl |
| SO₂ | 3Fe | 2FeO + FeS |
| (COOH)₂ (oxalic acid) | conc. H₂SO₄ | CO + CO₂ + H₂O |
| H₂SO₄ | HNO₃ | no redox reaction: both are oxidizing agents. (Concentrated sulphuric acid, the stronger acid, protonates nitric acid: , giving the nitronium ion used to nitrate benzene in organic chemistry.) |
| SO₃ | H₂SO₄ (conc.) | H₂S₂O₇ (oleum, pyrosulphuric acid) |
| Cu²⁺ | H₂S (acidic medium) | CuS↓ (black) + 2H⁺ |
Write the products of the following reactions and balance them.
- a.C₁₂H₂₂O₁₁ + conc. H₂SO₄ → ?
- b.H₂SO₄ + P → ?
- c.H₂S + SO₂ → ?
- d.Fe₂(SO₄)₃ + SO₂ + H₂O → ?
- e.Ni²⁺ + H₂S (alkaline medium) → ?
- f.FeCl₃ + H₂S → ?
- g.KMnO₄ + H₂SO₄ + H₂S → ?
- h.FeS + H₂SO₄ → ?
Answer
- a.
- b.
- c.
- d.
- e. (black)
- f.
- g.
- h.
Concentrated sulphuric acid is both an oxidizing agent and a non-volatile acid.
- a.Write an equation each to illustrate these two properties.
- b.Write the test for this acid in the chemistry laboratory.
- c.Write any three uses of this acid.
- d.Why is this acid called the king of chemicals?
- e.How would you dilute this acid?
Answer
- a.Oxidizing agent: . Non-volatile acid (it drives a volatile acid out of its salt): .
- b.Add barium chloride solution to the (diluted) acid: a white precipitate of barium sulphate, insoluble in dilute HCl, forms: . (The acidic nature shows with blue litmus.)
- c.Making fertilizers; in car batteries; as a dehydrating and drying agent (and refining petroleum, making chemicals).
- d.Because more of it is made than any other chemical, and it is used in almost every industry.
- e.Add the acid slowly to a large amount of water, stirring, never water to the acid, because the mixing gives out so much heat that water poured onto the acid boils and spatters the acid.
Copy and complete the table:
| Column A: substance reacted with the acid | Column B: dilute or concentrated sulphuric acid | Column C: gas produced |
|---|---|---|
| chlorine | ||
| carbon monoxide | ||
| hydrogen | ||
| carbon dioxide |
Answer
| Column A | Column B | Column C |
|---|---|---|
| sodium chloride and manganese dioxide | concentrated | chlorine: |
| formic acid (or oxalic acid) | concentrated | carbon monoxide: |
| zinc | dilute | hydrogen: |
| sodium carbonate or marble (or carbon, with hot concentrated acid) | dilute | carbon dioxide: |
