Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
42 questions
Unit 10 · Chemistry of Metals
Printable PDFs
- Study notes 3 pages
- Worksheet 5 pages Answer key
B. Short answer questions
- a.Define minerals and ores, with examples.
- b.What are alloys? Why are they made?
- c.Explain the terms flux and matrix.
- d.What are metalloids? Give some examples.
Answer
- a.A mineral is a naturally occurring substance of definite composition, found in the Earth’s crust, that contains a metal: cuprite (Cu₂O), malachite, chalcopyrite (CuFeS₂) and native copper are minerals of copper. An ore is a mineral from which the metal can be extracted conveniently and profitably: chalcopyrite is the chief ore of copper, hematite (Fe₂O₃) of iron, bauxite of aluminium.
- b.An alloy is a homogeneous mixture of a metal with other metals or with a non-metal, made by melting them together, such as brass (Cu + Zn) and steel (Fe + C). They are made to get properties the pure metals lack: greater hardness and strength (steel), resistance to corrosion (stainless steel), a lower melting point (solder), a better color or ring (bell metal).
- c.Matrix (gangue) is the unwanted rock and earth mined along with an ore, such as sand and clay. A flux is a substance added during extraction that combines with the infusible gangue to form a fusible slag: limestone (basic flux) removes silica, silica (acidic flux) removes iron oxide.
- d.Metalloids are elements with properties between those of metals and non-metals: they look metallic but are brittle, are semiconductors, and form amphoteric or acidic oxides. Examples: boron, silicon, germanium, arsenic, antimony and tellurium.
What is metallurgy? Briefly explain pyrometallurgy and electrometallurgy.
Answer
Metallurgy is the science and technology of extracting metals from their ores, purifying them and using them.
Pyrometallurgy is extraction at high temperature: the concentrated ore is calcined or roasted to an oxide, which is heated with a reducing agent (coke, CO) and a flux, giving molten metal and slag; it is used for metals of middling reactivity such as Fe, Cu, Zn, Pb and Sn.
Electrometallurgy is extraction by electrolysis of a molten compound of the metal: the metal ions are reduced at the cathode. It is used for the most reactive metals, which no chemical reducing agent can reduce: Na, K, Mg, Ca and Al (e.g. in the Downs cell).
What types of metals are extracted by hydrometallurgy?
Answer
Metals of low reactivity, which are easily displaced from their solutions by a more reactive metal: chiefly silver and gold (leached with dilute cyanide and recovered with zinc), and also copper from low-grade ores (leached with dilute sulphuric acid and recovered by electrolysis or with scrap iron).
Give reasons:
- a.All ores are minerals, but all minerals are not ores.
- b.Alkali metals are not extracted by carbon reduction.
- c.Sulphide ores are roasted rather than calcined.
Answer
- a.Every ore is a naturally occurring compound of the metal, so it is a mineral. But only a mineral that is rich enough, plentiful enough and easy enough to work for the metal to be got profitably is an ore: copper occurs in many minerals, but chalcopyrite is its chief ore.
- b.Alkali metals hold oxygen and chlorine more firmly than carbon does, so carbon can’t reduce their compounds; at the very high temperatures that would be needed they would form carbides with carbon, and their vapors are extremely reactive. They are got by electrolysis of their molten chlorides.
- c.A sulphide must lose its sulphur to become an oxide, and that needs oxygen: heated in excess air, . Calcination, in little or no air, only drives off CO₂ or water; it can’t remove sulphur.
Differentiate between:
- a.calcination and roasting
- b.electrometallurgy and hydrometallurgy
- c.pyrometallurgy and hydrometallurgy
- d.gangue and flux
- e.poling and liquation
- f.metalloids and amalgams
- g.self-reduction and electrochemical reduction
- h.the carbon reduction process and the aluminothermic process
Answer
a.
| Calcination | Roasting |
|---|---|
| Heating in the absence or limited supply of air | Heating in excess air |
| For carbonate and hydrated ores | For sulphide ores |
| Gives off CO₂ and water vapor | Gives off SO₂ |
b.
| Electrometallurgy | Hydrometallurgy |
|---|---|
| The metal is got by electrolysis of a molten compound | The metal is dissolved out in an aqueous solution and displaced from it |
| For very reactive metals: Na, K, Mg, Ca, Al | For unreactive metals: Ag, Au (and Cu) |
| Reducing agent: electrons at the cathode | Reducing agent: a more reactive metal, such as zinc |
c.
| Pyrometallurgy | Hydrometallurgy |
|---|---|
| At high temperature, in furnaces | At ordinary temperature, in water solutions |
| Ore reduced by coke, CO or aluminium | Metal leached out and displaced by another metal |
| For Fe, Cu, Zn, Pb, Sn | For Ag, Au (and Cu from poor ores) |
d.
| Gangue | Flux |
|---|---|
| The unwanted rock that comes with the ore | A substance added to remove the gangue |
| Present in the ore naturally | Added on purpose during smelting |
| Infusible (refractory) | Combines with gangue to give fusible slag |
| Example: SiO₂ in iron ore | Example: CaCO₃ (removes SiO₂) |
e.
| Poling | Liquation |
|---|---|
| Removes oxide impurities by reducing them | Separates a low-melting metal from higher-melting impurities |
| The molten metal is stirred with green wood, whose gases reduce the oxide | The impure metal is heated on a sloping hearth: the pure metal melts and flows away |
| For Cu, Sn, Pb | For Sn, Pb, Bi |
f.
| Metalloids | Amalgams |
|---|---|
| Elements with properties between metals and non-metals | Alloys of a metal with mercury |
| Single elements: B, Si, Ge, As, Sb, Te | Mixtures: dental amalgam, sodium amalgam |
g.
| Self-reduction | Electrochemical reduction |
|---|---|
| The sulphide ore reduces its own roasted oxide; no other reducing agent | The molten ore is electrolyzed; electrons at the cathode reduce it |
| For unreactive metals: Cu, Hg, Pb | For very reactive metals: Na, Mg, Al |
h.
| Carbon reduction (smelting) | Aluminothermic process |
|---|---|
| Reducing agent: coke or CO | Reducing agent: aluminium powder |
| Needs a furnace kept hot by burning fuel | The reaction’s own heat melts the metal |
| For oxides of Fe, Zn, Sn, Pb | For oxides of Cr, Mn, W, which hold oxygen too firmly for carbon or form carbides |
Write a note on gangue, flux and slag.
Answer
Gangue is the unwanted rock (sand, clay, silicates, limestone) mined along with an ore; it is refractory, so it doesn’t melt in the furnace. A flux is a substance added during smelting to remove the gangue: an acidic flux (SiO₂, borax) for basic gangue such as FeO, a basic flux (CaO, CaCO₃, MgO) for acidic gangue such as SiO₂. The flux combines with the gangue to form slag, a fusible compound such as calcium silicate, . The slag is liquid in the furnace and lighter than the molten metal, so it floats on top and is run off; it is used in cement and road-making.
Describe the steps involved in metallurgy.
Answer
- Crushing and pulverization: big lumps of ore are broken in jaw crushers and ground to powder in ball mills.
- Concentration (dressing): most of the gangue is removed, by hand picking, gravity separation (density), froth flotation (wettability; sulphides), magnetic separation, or leaching (chemical; bauxite with NaOH).
- Conversion into the oxide: carbonate and hydrated ores are calcined (heated without air), sulphide ores roasted (heated in air).
- Reduction: the oxide is reduced to the metal: by coke or CO with a flux (smelting, Fe, Zn), by aluminium (Cr, Mn), by self-reduction (Cu, Hg), or by electrolysis of the molten compound (Na, Mg, Al).
- Refining: the impure metal is purified by poling, liquation, distillation, oxidation or electrolytic refining.
Draw a flow sheet showing the steps in the extraction of a metal from its ore.
Answer
The flow sheet in Figure 10.6: ore from the mine → crushing and grinding → concentration → then, by the metal’s reactivity, electrolysis of the pure molten compound (very reactive metals: Na, Mg, Al), or calcination (carbonate ores) or roasting (sulphide ores) to the oxide followed by reduction with C, CO or Al (middling metals: Zn, Fe, Pb), or roasting in air with self-reduction (unreactive metals: Cu, Hg) → impure metal → refining → pure metal.
What are metalloids? Give some examples, and write their general characteristics.
Answer
Metalloids are elements whose properties lie between those of metals and non-metals. Examples: boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb) and tellurium (Te).
Characteristics:
- a.They look metallic (shiny gray) but are brittle, not malleable or ductile.
- b.They conduct electricity, but much less than metals: they are semiconductors, conducting better as they warm up.
- c.Their oxides are amphoteric or weakly acidic (As₂O₃, Sb₂O₃ amphoteric; SiO₂, B₂O₃ acidic).
- d.They form covalent compounds, and alloys with metals.
- e.They lie along the staircase line between the metals and non-metals in the periodic table.
What do you mean by alloys? Why are they prepared? Give some examples.
Answer
An alloy is a homogeneous mixture of two or more metals, or of a metal with a non-metal, made by melting them together. Alloys are made to get properties the pure metal lacks: more hardness and strength (steel: Fe with 0.1–2% C), resistance to rust (stainless steel: Fe, Cr, Ni), a better color and ring (bell metal: Cu, Sn), a lower melting point (solder: Sn, Pb), little expansion (invar: Fe, Ni). More examples: brass (Cu, Zn), bronze (Cu, Sn), German silver (Cu, Zn, Ni), nichrome (Ni, Cr).
What is an amalgam? Write its importance.
Answer
An amalgam is an alloy in which one of the metals is mercury: sodium amalgam (Na + Hg), dental amalgam (Hg with Ag, Sn, Cu), gold and silver amalgams.
Importance:
- a.Dental amalgam has long been used to fill teeth: soft when mixed, it sets hard and lasts.
- b.Sodium amalgam is a gentle reducing agent in chemistry.
- c.Gold amalgam was used to extract gold from crushed rock and for fire-gilding statues (the mercury boiled off, leaving gold).
- d.Mercury dissolves only some metals: it forms no amalgam with iron, so it is kept in iron flasks.
Because mercury and its vapor are poisonous, amalgams are being phased out under the Minamata Convention.
Write a brief note on:
- a.pyrometallurgy
- b.crushing and pulverization
- c.gravity separation
- d.froth flotation
Answer
- a.Pyrometallurgy is extraction at high temperature: the concentrated ore is calcined or roasted to the oxide, which is reduced by heating with coke or another reducing agent and a flux, giving molten metal and slag; the metal is then refined. Used for Fe, Cu, Zn, Pb, Sn.
- b.Crushing and pulverization: the first step, in which the big lumps of ore from the mine are broken into small pieces in a jaw crusher (crushing) and ground to a fine powder in a ball mill or stamp mill (pulverization), so that the ore and gangue grains come apart and the later steps can act on their surfaces.
- c.Gravity separation (levigation) uses the difference in density between heavy ore grains and light gangue: the powdered ore is washed down a sloping, shaking Wilfley table with riffles by a stream of water; the light gangue is carried away and the heavy ore settles behind the riffles. Used for oxide ores such as cassiterite (SnO₂) and hematite.
- d.Froth flotation concentrates sulphide ores (ZnS, PbS, CuFeS₂) by their wettability: the powdered ore is stirred with water, pine oil (frother) and a collector (potassium ethyl xanthate), and air is blown in. The collector makes the sulphide grains water-repelling, so they stick to air bubbles and rise into the froth, which is skimmed off; the wetted rock sinks.
Explain:
- a.distillation
- b.poling
- c.electrolytic refining
- d.self-reduction
- e.the thermite process
Answer
- a.Distillation refines metals with low boiling points, such as zinc (907 °C), mercury (357 °C) and cadmium: the impure metal is heated until the metal boils, and the vapor is condensed, leaving behind the impurities that boil at higher temperatures.
- b.Poling refines metals containing their own oxide, such as copper (Cu₂O) and tin: the molten metal is stirred with green wooden poles, whose hydrocarbon gases reduce the oxide to metal, , and the scum is skimmed off.
- c.Electrolytic refining: the impure metal is the anode, a thin sheet of pure metal the cathode, in a solution of a salt of the metal (acidified CuSO₄ for copper). The current dissolves the anode, , and deposits pure metal on the cathode, ; less reactive impurities fall as anode mud, more reactive ones stay in solution.
- d.Self-reduction: the sulphide ore of an unreactive metal is partly roasted to the oxide, which then reacts with the rest of the sulphide to give the metal, with no other reducing agent: .
- e.The thermite process (aluminothermic reduction): a metal oxide that carbon can’t reduce well (Cr₂O₃, Mn₃O₄) is mixed with aluminium powder and lit with a magnesium ribbon and barium peroxide; aluminium reduces it with so much heat that the metal forms molten: . With iron oxide it is used to weld rails.
What are refractory materials? Give some examples. How are they removed during the extraction of a metal?
Answer
Refractory materials are substances that don’t melt or evaporate even at very high temperatures. In an ore, the refractory materials are the gangue: silica (SiO₂), alumina, silicates, lime. (Refractory substances such as magnesia, alumina and fire-brick are also used on purpose, to line furnaces.)
They are removed by adding a flux of the opposite kind, which combines with them to form a fusible slag that floats on the molten metal and is run off: silica is removed with limestone, ; basic oxides with silica, .
What is smelting? Write its significance in metallurgy.
Answer
Smelting is the reduction of a roasted or calcined ore to the molten metal by heating it strongly with coke (carbon) and a flux, usually in a blast furnace: .
Significance: in one step it a. reduces the oxide to the metal; b. removes the remaining gangue as slag, through the flux; c. gives the metal molten, so that it separates from the lighter slag and can be tapped off and cast. It is the main step in getting iron, zinc, tin and lead.
Give the formulas of two ores on which each of these operations is carried out:
- a.leaching
- b.smelting
- c.froth flotation
- d.poling
- e.self-reduction
- f.liquation
- g.roasting
Answer
- a.Leaching: bauxite, Al₂O₃·2H₂O; silver glance, Ag₂S (and native gold).
- b.Smelting: hematite, Fe₂O₃; zincite, ZnO (or cassiterite, SnO₂).
- c.Froth flotation: zinc blende, ZnS; galena, PbS (or chalcopyrite, CuFeS₂).
- d.Poling is done on the metal, not the ore: on copper got from copper glance, Cu₂S, or chalcopyrite, CuFeS₂, and on tin got from cassiterite, SnO₂.
- e.Self-reduction: copper glance, Cu₂S; cinnabar, HgS (or galena, PbS).
- f.Liquation is also done on the metal: on tin from cassiterite, SnO₂, and lead from galena, PbS.
- g.Roasting: zinc blende, ZnS; galena, PbS.
Which types of ores or metals are treated by these operations?
- a.gravity separation
- b.calcination
- c.froth flotation
- d.electrochemical reduction
Answer
- a.Gravity separation: heavy (dense) ores, usually oxides, of tin (cassiterite), iron (hematite) and also gold.
- b.Calcination: carbonate and hydrated ores, of zinc (calamine), copper (malachite), calcium and magnesium (limestone, magnesite), aluminium (bauxite).
- c.Froth flotation: sulphide ores, of zinc, lead and copper.
- d.Electrochemical reduction: the most reactive metals: Na, K, Li, Mg, Ca and Al.
What principles are used in gravity separation and in magnetic separation?
Answer
Gravity separation uses the difference in density between the ore and the gangue: in a stream of water, the light gangue grains are carried away while the heavy ore grains settle.
Magnetic separation uses the difference in magnetism: when the powdered ore passes over a magnetic roller, the magnetic grains (ore or impurity) are held to the belt and fall separately from the non-magnetic grains, which fly off the end.
How are metals generally extracted and purified from sulphide ores?
Answer
- The ore is crushed and powdered.
- It is concentrated by froth flotation, which floats off the sulphide grains.
- It is roasted in excess air to the oxide, the sulphur leaving as SO₂: .
- The oxide is reduced: smelted with coke (), or, for unreactive metals such as copper and mercury, reduced by the remaining sulphide (self-reduction, ).
- The metal is refined: distillation for zinc, poling and then electrolytic refining for copper.
B. Short answer questions
- a.What are alkali metals? List them. Why are they called so?
- b.How does sodium react with ammonia?
Answer
- a.The alkali metals are the elements of Group 1 below hydrogen, with the valence configuration ns¹: lithium, sodium, potassium, rubidium, cesium and francium. They are called alkali metals because they react with water to give strong alkalis (soluble hydroxides) and hydrogen, e.g. .
- b.In liquid ammonia, sodium dissolves to a deep blue solution of ammoniated sodium ions and ammoniated electrons, which conducts and is a strong reducing agent: . Heated in ammonia gas (or when the solution stands), it gives sodamide and hydrogen: .
Give reasons:
- a.Alkali metals become dull when exposed to the atmosphere.
- b.Alkali metals are good reducing agents.
- c.Potassium is more reactive than sodium.
- d.Sodium metal is stored in paraffin oil.
- e.Sodium cannot be extracted by pyrometallurgy.
Answer
- a.Their surface reacts at once with oxygen and moisture in the air, forming a dull layer of oxide and hydroxide (and then carbonate), which hides the metal’s luster.
- b.They lose their single valence electron very easily (very low ionization energy, very negative electrode potential), and a reducing agent is a substance that gives electrons to another.
- c.Potassium’s outer electron (4s) is in a shell farther from the nucleus than sodium’s (3s), and more shielded by inner shells, so it is held more weakly: potassium’s ionization energy (419 kJ/mol) is lower than sodium’s (496), and it loses its electron more readily.
- d.Sodium reacts with oxygen and moisture in the air, and violently with water. Paraffin oil doesn’t react with it and keeps air and moisture away.
- e.Sodium holds oxygen and chlorine more firmly than carbon does, so carbon can’t reduce its compounds; and at the very high temperature needed, sodium would form sodium carbide with carbon, and its vapor would be extremely reactive. It is extracted by electrolysis of molten NaCl.
Define the terms a. soda ash b. caustic soda, and write their formulas.
Answer
- a.Soda ash is anhydrous sodium carbonate, Na₂CO₃, a white powder made on a large scale (by the Solvay process) for glass, soap and paper.
- b.Caustic soda is sodium hydroxide, NaOH, a white, deliquescent, corrosive solid (caustic: it burns skin), a strong base used to make soap and paper.
Differentiate between:
- a.sodium and potassium
- b.baking soda and washing soda
- c.caustic soda and soda ash
- d.Mg and Ba
- e.alkali metals and alkaline earth metals
Answer
a.
| Sodium | Potassium |
|---|---|
| Atomic number 11, [Ne]3s¹ | Atomic number 19, [Ar]4s¹ |
| Smaller atom (186 pm), higher ionization energy (496 kJ/mol) | Larger atom (227 pm), lower ionization energy (419 kJ/mol) |
| Reacts vigorously with water | Reacts more violently: the hydrogen catches fire |
| Golden yellow flame | Lilac flame |
| Burns to mainly the peroxide, Na₂O₂ | Burns to the superoxide, KO₂ |
| Density 0.97 g/cm³ | Density 0.89 g/cm³ |
b.
| Baking soda | Washing soda |
|---|---|
| Sodium hydrogen carbonate, NaHCO₃ | Sodium carbonate decahydrate, Na₂CO₃·10H₂O |
| Very weakly alkaline (pH about 8) | Fairly strongly alkaline (pH about 11) |
| Gives CO₂ on heating: | Loses its water of crystallization on heating |
| Used in baking and as an antacid | Used for washing and softening water |
c.
| Caustic soda | Soda ash |
|---|---|
| Sodium hydroxide, NaOH | Anhydrous sodium carbonate, Na₂CO₃ |
| A strong base, corrosive | A weaker base, from hydrolysis of carbonate |
| Deliquescent | Not deliquescent |
| Gives off no gas with acids | Gives off CO₂ with acids |
d.
| Magnesium | Barium |
|---|---|
| [Ne]3s², small atom (160 pm) | [Xe]6s², large atom (222 pm) |
| Reacts only with hot water (or steam) | Reacts readily with cold water |
| No flame color | Apple-green flame |
| Hydroxide almost insoluble | Hydroxide quite soluble, strongly alkaline |
| Sulphate very soluble | Sulphate almost insoluble |
| Carbonate decomposes at about 540 °C | Carbonate stable to about 1360 °C |
e.
| Alkali metals | Alkaline earth metals |
|---|---|
| Group 1, ns¹ | Group 2, ns² |
| Oxidation state +1 | Oxidation state +2 |
| Very soft, low melting points | Harder, higher melting points |
| Larger atoms, lower ionization energies | Smaller atoms, higher ionization energies |
| More reactive; all react with cold water | Less reactive; Be doesn’t react with water, Mg only when hot |
| Carbonates (except Li’s) stable to heat and soluble | Carbonates decompose on heating and are insoluble |
An element X has the valence-shell configuration 3s¹.
- a.Identify X.
- b.How does X react with sulphur?
- c.Why is X stored in kerosene?
- d.What happens when a piece of X is added to water?
Answer
- a.Third period (n = 3), one s electron: sodium, Na, [Ne]3s¹.
- b.Heated with sulphur, it forms sodium sulphide: .
- c.It reacts quickly with oxygen and moisture in air and violently with water; kerosene doesn’t react with it and keeps air and water away.
- d.It floats, melts into a ball, darts about and fizzes, and may catch fire, giving sodium hydroxide and hydrogen: . The solution becomes alkaline.
Sodium, the most abundant alkali metal in the Earth’s crust, is extracted by electrolysis of a mixture of molten NaCl and CaCl₂, in the ratio of about 2 : 3, in the Downs process.
- a.Write two advantages of adding CaCl₂.
- b.What would happen if NaCl alone were electrolyzed?
- c.Write the electrode reactions in the Downs cell.
- d.Give three uses of sodium.
Answer
- a.i. It lowers the melting point of the electrolyte from 801 °C to about 600 °C, saving energy. ii. At 600 °C, far below sodium’s boiling point (883 °C), the sodium doesn’t boil away, doesn’t form a metallic fog with the melt, and the sodium and chlorine attack the cell much less.
- b.The cell would have to run above 801 °C: much of the sodium would vaporize, the rest would dissolve in the melt as a metallic fog that could short-circuit the cell, and the hot sodium and chlorine would corrode it.
- c.Cathode: . Anode: . Overall: .
- d.Any three: sodium vapor lamps; the coolant in some nuclear reactors; a reducing agent, as in making titanium; Lassaigne’s test for elements in organic compounds; organic reactions (Wurtz); sodium amalgam.
The figure shows a Downs cell, used to extract sodium.
- a.Write the importance of the Downs cell.
- b.What is the purpose of mixing CaCl₂ with NaCl?
- c.Identify A and B, with the electrode reactions.
Answer
- a.It makes very pure sodium (over 99.5%) continuously from cheap sodium chloride, the world’s main source of sodium metal, and gives chlorine as a valuable by-product.
- b.To lower the melting point from 801 °C to about 600 °C, so that the sodium doesn’t vaporize or form a fog in the melt, and the cell lasts longer and uses less energy.
- c.A is chlorine, rising from the graphite anode: . B is sodium, formed at the ring-shaped steel cathode and led off to the receiver: .
What happens when
- a.a pellet of sodium hydroxide is added to copper sulphate solution?
- b.sodium carbonate is added to a solution of MgCl₂?
- c.caustic soda is heated with CO under high pressure?
Answer
- a.A pale blue precipitate of copper(II) hydroxide forms: .
- b.A white precipitate of magnesium carbonate forms: .
- c.Sodium formate forms (at about 210 °C and 5–10 atm): ; with acid it gives formic acid.
List the uses of a. caustic soda b. sodium carbonate c. sodium metal.
Answer
- a.Caustic soda: making soap, detergents, rayon, paper and pulp; purifying bauxite; refining petroleum; as a laboratory reagent; clearing drains; making soda lime.
- b.Sodium carbonate: making glass, soap, detergents, caustic soda, borax and paper; softening hard water; laundry; raising the pH of swimming pools; removing SO₂ from waste gases; as a laboratory reagent.
- c.Sodium: sodium vapor lamps; the coolant in some nuclear reactors; a reducing agent, as in extracting titanium; Lassaigne’s test; organic reactions (Wurtz, Birch); sodium amalgam.
What are alkaline earth metals? Why are they called so? List their general characteristics.
Answer
The alkaline earth metals are the elements of Group 2, with the valence configuration ns²: beryllium, magnesium, calcium, strontium, barium and radium. They are so called because their oxides were among the old “earths” of the Earth’s crust, and these give alkaline solutions with water: .
General characteristics:
- a.silvery-white metals, harder than the alkali metals, with higher melting points;
- b.atoms large, but smaller than the alkali metals’, growing down the group;
- c.low ionization energies, but higher than the alkali metals’, with two low values;
- d.oxidation state +2;
- e.strong reducing agents, more so down the group;
- f.Ca, Sr and Ba give flame colors (brick red, crimson, apple green); Be and Mg give none;
- g.reactive, but less than the alkali metals: they react with oxygen, water (except Be), hydrogen, nitrogen, halogens and acids;
- h.their hydroxides grow more soluble down the group, their carbonates and sulphates less, and their carbonates and nitrates more stable to heat.
Give reasons:
- a.Magnesium becomes dull when exposed to the atmosphere.
- b.Alkaline earth metals show a +2 oxidation state.
- c.Alkaline earth metals don’t occur in the native state.
Answer
- a.Its surface reacts slowly with oxygen (and moisture and CO₂) in the air, forming a dull white layer of magnesium oxide: .
- b.They have two valence electrons, ns²; losing both gives the M²⁺ ion with a noble gas configuration. The third electron would have to come from a full inner shell, which needs far too much energy.
- c.They are reactive metals, easily oxidized: they react with oxygen, water and acids in nature, so they are found only in compounds (limestone, dolomite, magnesite, gypsum, barytes), never as the metal.
- a.How does magnesium react with boiling water?
- b.What is the use of quicklime in metallurgy?
- c.Write the formulas of magnesia and Epsom salt.
Answer
- a.It reacts slowly, giving magnesium hydroxide and hydrogen: .
- b.It is a basic flux: it removes acidic gangue such as silica as slag, .
- c.Magnesia: MgO. Epsom salt: MgSO₄·7H₂O.
An element Y has the valence-shell configuration 3s².
- a.Identify Y.
- b.How does Y react with sulphur?
- c.What happens when a piece of Y is put in boiling water?
Answer
- a.Third period, two s electrons: magnesium, Mg, [Ne]3s².
- b.Heated with sulphur, it forms magnesium sulphide: .
- c.It reacts slowly, giving off hydrogen and forming magnesium hydroxide: .
C. Long answer questions
Calcination is one of the processes that turn an ore into its oxide. It is usually done in the furnace shown.
- a.Name the furnace.
- b.Define calcination, and give two examples of ores that are calcined.
- c.Write two reactions that take place in it.
- d.Name two waste gases given off.
Answer
- a.A reverberatory furnace: the fuel burns in a separate firebox, and the flames and hot gases are thrown down onto the ore by the curved roof.
- b.Calcination is heating a concentrated ore strongly, below its melting point, in the absence or a limited supply of air, to turn it into its oxide (driving off CO₂, water and volatile matter). Ores calcined: calamine (ZnCO₃), malachite (CuCO₃·Cu(OH)₂), limestone (CaCO₃), bauxite (Al₂O₃·2H₂O).
- c. and .
- d.Carbon dioxide and water vapor (from the ore), with the fuel’s own flue gases. (When the furnace is used for roasting, sulphur dioxide.)
Describe the trend in the solubility of the alkaline earth metal hydroxides.
Answer
The solubility increases down the group: . Be(OH)₂ and Mg(OH)₂ are almost insoluble, Ca(OH)₂ sparingly soluble (limewater), Ba(OH)₂ quite soluble.
Reason: solubility depends on the balance between lattice energy (holding the ions together) and hydration energy (released when they are surrounded by water). Both fall as the cation grows down the group. The hydroxide ion is small, so the lattice energy depends strongly on the cation’s size and falls faster than the hydration energy does. With less lattice energy to overcome, the larger cations’ hydroxides dissolve more. (So their solutions also grow more alkaline down the group.)
Describe the trend in the solubility of the alkaline earth metal carbonates.
Answer
The solubility decreases down the group: ; all but BeCO₃ are practically insoluble.
Reason: the carbonate ion is large, much larger than the cations, so as the cation grows from Be²⁺ to Ba²⁺ the distance between the ions’ centers changes little and the lattice energy stays nearly constant. The hydration energy, which depends on the cation alone, falls steadily as the cation grows (Be²⁺ about 2494, Ba²⁺ about 1305 kJ/mol). Less energy is released by hydration to pay for breaking the lattice, so the compounds dissolve less and less.
Describe the trend in the solubility of the alkaline earth metal sulphates.
Answer
The solubility decreases down the group: . BeSO₄ and MgSO₄ are very soluble (about 35 g of MgSO₄ in 100 g of water), CaSO₄ slightly (0.21 g), SrSO₄ hardly (0.013 g), and BaSO₄ is practically insoluble (0.00024 g).
Reason: the sulphate ion is large, so the lattice energy hardly changes as the cation grows, while the hydration energy falls steadily from the small, highly charged Be²⁺ to the large Ba²⁺. So the energy released by hydration covers the lattice energy less and less, and the solubility falls. This is why barium sulphate precipitates so easily, and why it is a test for sulphate ions.
Describe the trend in the thermal stability of the alkaline earth metal sulphates.
Answer
The sulphates are much more stable to heat than the carbonates, but they too decompose at high temperatures, to the oxide and sulphur trioxide (which breaks up into SO₂ and O₂): . Their thermal stability increases down the group: .
Reason: the smaller the cation, the higher its charge density and the more it polarizes the large sulphate ion, weakening its S–O bonds on its side, so it breaks up at a lower temperature; the small cation also holds the small oxide ion formed especially strongly. Down the group the cation grows, polarizes the sulphate less, and more heat is needed.
Describe the trend in the thermal stability of the alkaline earth metal nitrates.
Answer
All the nitrates decompose on heating, giving the oxide, nitrogen dioxide and oxygen: . Their thermal stability increases down the group: .
Reason: a small cation with a 2+ charge has a high charge density and strongly polarizes (distorts) the large nitrate ion, weakening its N–O bonds, so it decomposes at a lower temperature. Down the group, the cation grows, its polarizing power falls, the nitrate ion is distorted less, and a higher temperature is needed.
List the uses of a. quicklime b. plaster of Paris c. Epsom salt d. bleaching powder.
Answer
- a.Quicklime (CaO): making cement, glass, calcium carbide, bleaching powder and soda lime; a basic flux in metallurgy; drying gases and alcohol; reducing soil acidity.
- b.Plaster of Paris (CaSO₄·½H₂O): casts for broken bones; statues, models and decorations; chalk; false ceilings and artificial marble; filling cracks in walls; fireproofing.
- c.Epsom salt (MgSO₄·7H₂O): a laxative; a mordant in dyeing and in tanning; paints, soaps and fireproofing; cosmetic lotions and bath salts; a magnesium fertilizer.
- d.Bleaching powder (CaOCl₂): disinfecting drains and toilets; sterilizing drinking water; bleaching paper, pulp, cotton and linen; making chloroform; removing stains; an oxidizing agent.
The trends in the solubility of the Group 2 sulphates and hydroxides are given: MgSO₄ (most soluble) → CaSO₄ → SrSO₄ → BaSO₄ (least soluble); Mg(OH)₂ → Ca(OH)₂ → Sr(OH)₂ → Ba(OH)₂, solubility and alkalinity increasing.
- a.What causes these trends?
- b.Which sulphate is precipitated most easily, and why?
- c.Which hydroxide solution has the highest pH, and why?
Answer
- a.Both come from the balance between lattice energy and hydration energy as the cation grows down the group. For the sulphates, the large anion keeps the lattice energy nearly constant, while the hydration energy falls, so solubility falls. For the hydroxides, the small OH⁻ ion makes the lattice energy fall faster than the hydration energy, so solubility rises.
- b.Barium sulphate: it is the least soluble (about 0.00024 g in 100 g of water), because the large Ba²⁺ ion has the lowest hydration energy. Any barium salt added to a solution of sulphate ions gives a white precipitate at once.
- c.Barium hydroxide: it is the most soluble hydroxide, so its solution holds the most OH⁻ ions, the highest pH. Magnesium hydroxide dissolves so little that its solution is only faintly alkaline.
Use the flow sheet to answer the questions.
- a.Identify X and Y.
- b.Write balanced equations for the change of Ca to Y, and of CaO to CaCl₂.
- c.Write balanced equations for the action of heat and of HCl on X.
- d.What are the common names of X, Y and CaO?
Answer
- a.X is calcium carbonate, CaCO₃ (heat gives CaO; HCl gives CaCl₂, H₂O and CO₂). Y is calcium hydroxide, Ca(OH)₂ (made from Ca or CaO with water).
- b. and .
- c.Heat: . HCl: .
- d.X, CaCO₃: limestone (also chalk, marble). Y, Ca(OH)₂: slaked lime (its solution is limewater). CaO: quicklime.
A blast furnace for smelting an ore is shown in Figure 10.12.
- a.Define smelting.
- b.Write the chemical reactions that take place in the furnace.
- c.What is the job of the flux?
- d.What is the impact of this process on the environment?
- e.In which part of the furnace is slag formed, and why there?
Answer
- a.Smelting is reducing a roasted or calcined ore to the molten metal by heating it strongly with coke and a flux, so that the gangue leaves as slag.
- b.Near the bottom, coke burns in the hot air: , and higher up . The carbon monoxide reduces the ore: (and lower down, carbon itself: ). The limestone decomposes, , and the lime combines with the sand: (slag).
- c.The flux, limestone, turns the infusible gangue (silica) into fusible slag, calcium silicate, which floats on the molten iron and is tapped off; it also protects the iron from being oxidized again by the air blast.
- d.It gives off huge amounts of carbon dioxide, a greenhouse gas (about 1.8 tonnes for every tonne of steel, from the coke and the limestone), and carbon monoxide, dust and some sulphur dioxide; it uses up coal; mining the ore and coal scars the land. The slag can be used (in cement), and the waste gas is burnt to heat the air blast.
- e.In the zone of slag formation, in the middle of the furnace (about 700–1000 °C). There the limestone has decomposed into lime, and it is hot enough for the lime to combine with the silica; the molten slag then trickles down and collects on top of the iron in the hearth.
