← Grade 11 Chemistry Model Papers
Grade 11 Chemistry Model Paper 2
Full marks: 75Time: 3 hours
Answer every question; where a question has an OR question, answer either one.
A full practice run of NEB's Grade 11 Chemistry paper (Che. 301): 75 marks in 3 hours. Question 1 is group A, 11 multiple-choice items; questions 2 to 9 are group B and questions 10 to 12 group C, each of two to four parts with the marks of each part. Questions 2 and 4 in group B and Question 11 in group C have an OR question: answer either one. Take per mol, the molar volume of a gas at STP as 22.4 L, L atm/(mol K) and 1 F = 96,500 C; atomic masses are given where a question needs them. Write your answers on paper as in the exam hall, then tap your choice in group A, open each other part's answer and give yourself the marks its scheme allows.
A practice paper by Science Playground, made to CDC’s Specification Grid 2077, Grade 11 Chemistry (Che. 301). Not an official CDC or NEB paper; the real NEB Grade 11 exam may differ.
Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.
Paper to print (PDF, 5 pages) Answer key and marking scheme
Group AMultiple choice11 marks
Question 1
11 × 1 = 11Choose the correct option for each of the following questions.
According to the modern periodic law, the properties of the elements are periodic functions of their
Pick an answer to see why.
What is the hybridization of each carbon atom in ethyne, HC≡CH?
Pick an answer to see why.
A catalyst is added to a reaction mixture that is already at equilibrium. What happens?
Pick an answer to see why.
What is the oxidation number of chromium in potassium dichromate, K₂Cr₂O₇?
Pick an answer to see why.
What is the percentage of nitrogen by mass in urea, CO(NH₂)₂? (C = 12, O = 16, N = 14, H = 1)
Pick an answer to see why.
Why are the alkali metals strong reducing agents?
Pick an answer to see why.
Nitric oxide from the engines of high-flying aircraft also destroys ozone in the stratosphere, in two steps: , then . What does this show about nitric oxide?
Pick an answer to see why.
What is the first stage in developing a new product?
Pick an answer to see why.
In the contact process, the sulphur dioxide made from pyrite is passed over moist iron(III) hydroxide before it reaches the catalyst. Why?
Pick an answer to see why.
Which of these is an advantage of urea over other nitrogenous fertilizers?
Pick an answer to see why.
Urea is made from ammonia and carbon dioxide: . What is the greatest mass of urea that 17 tonnes of ammonia can give? (N = 14, H = 1, C = 12, O = 16)
Pick an answer to see why.
Group BShort answers, each on one content area40 marks
Question 2
5 marksIron (Z = 26) and chromium (Z = 24) are transition metals of the fourth period.
State the Aufbau principle and Hund's rule of maximum multiplicity.
Answer
Aufbau principle: in the ground state, electrons fill the orbitals in order of increasing energy, the lowest-energy orbital first (the order given by the rule: 1s, 2s, 2p, 3s, 3p, 4s, 3d, …).
Hund's rule: when electrons fill orbitals of equal energy (such as the three p or five d orbitals), they go one into each orbital, with parallel spins, before any orbital takes a second electron.
Marking scheme
- Aufbau: orbitals are filled in order of increasing energy.
- Hund's rule: in orbitals of equal energy, pairing starts only after each has one electron (spins parallel).
Write the electronic configuration of the Fe³⁺ ion.
Answer
Fe is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁶ ([Ar] 4s² 3d⁶). The ion loses the two 4s electrons first, then one 3d electron:
Fe³⁺: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵, or [Ar] 3d⁵.
Marking scheme
- Fe³⁺: [Ar] 3d⁵ (1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁵), the 4s electrons removed first.
By the Aufbau order, chromium should be [Ar] 4s² 3d⁴, but it is [Ar] 4s¹ 3d⁵. Explain why. Use the same idea to say why iron(II) compounds slowly turn into iron(III) compounds in air.
Answer
In chromium, the 4s and 3d orbitals are very close in energy. Moving one 4s electron into 3d gives a half-filled 3d subshell (3d⁵, one electron in each of the five d orbitals, all spins parallel) and a half-filled 4s; half-filled (and full) subshells are extra stable, because of their symmetry and the larger exchange energy, so 4s¹ 3d⁵ has the lower energy.
Fe²⁺ is [Ar] 3d⁶; losing one more electron gives Fe³⁺, [Ar] 3d⁵, the same stable half-filled subshell. So Fe²⁺ is easily oxidized to the more stable Fe³⁺ in air.
Marking scheme
- Chromium: 4s¹ 3d⁵ gives a half-filled 3d subshell, which is extra stable (lower energy).
- Fe²⁺ (3d⁶) loses one electron to reach the stable half-filled 3d⁵ of Fe³⁺.
OR
The electron affinities of the Group 16 elements, in kJ/mol (energy released), are: oxygen 141, sulphur 200, selenium 195, tellurium 190.
Define electron affinity. How does it generally change down a group?
Answer
The (first) electron affinity is the energy released when one mole of electrons is added to one mole of isolated gaseous atoms to form one mole of gaseous ions of charge −1: .
Down a group it generally decreases (less energy is released), because the atoms get larger and the incoming electron is held farther from the nucleus.
Marking scheme
- Electron affinity: energy released when an electron is added to an isolated gaseous atom (per mole) to form a −1 ion.
- Decreases down a group (larger atoms, electron farther from the nucleus).
Calculate the energy released when 1.6 g of gaseous sulphur atoms each gain one electron. (S = 32)
Answer
Marking scheme
- 0.050 mol × 200 kJ/mol = 10 kJ.
Explain why the values fall from sulphur to tellurium, and yet oxygen, the smallest atom of the group, releases the least energy of all four.
Answer
Sulphur to tellurium: each element down the group has one more shell. The incoming electron enters an outer shell that is farther from the nucleus and better shielded by the inner shells, so it is attracted less and less energy is released.
Oxygen: by size alone oxygen should release the most. But its atom is so small that its 2p subshell is crowded: the incoming electron is squeezed close to the six electrons already in the second shell and is strongly repelled by them, so less energy is released than for sulphur, whose larger 3p subshell has more room. (Fluorine and chlorine show the same thing in Group 17.)
Marking scheme
- Down from S to Te: larger atoms, the added electron farther from the nucleus and better shielded, so less energy released.
- Oxygen: its small, crowded 2p subshell repels the incoming electron strongly, so it releases less than sulphur.
Question 3
5 marksSujan copper-plates a key in his school laboratory. The key is one electrode and a strip of copper the other, both dipped in copper sulphate solution, and a current of 1.5 A is passed for 40 minutes. (Cu = 63.5)
State Faraday's first law of electrolysis.
Answer
The mass of a substance deposited or liberated at an electrode is directly proportional to the quantity of electricity (charge) passed through the electrolyte: , where is the electrochemical equivalent.
Marking scheme
- Mass deposited is directly proportional to the quantity of electricity passed (m = ZIt).
Calculate the mass of copper deposited on the key.
Answer
: 2 × 96,500 C deposit one mole, 63.5 g, of copper. So
About 1.18 g of copper.
Marking scheme
- Charge passed 3600 C (time in seconds).
- Mass of copper 1.18 g, using 2 F per mole of Cu.
Which electrode must the key be, and why? During the plating the copper strip gets thinner, but the blue color of the solution stays the same. Explain.
Answer
The key must be the cathode (joined to the negative terminal): Cu²⁺ ions in the solution gain electrons there, , and copper is laid on it.
The copper strip is the anode. A copper anode gives up electrons more easily than OH⁻ or SO₄²⁻ ions do, so the anode itself dissolves, : it gets thinner, and for every Cu²⁺ ion that leaves the solution at the cathode, one enters it at the anode. The concentration of Cu²⁺, and so the blue color, stays the same.
Marking scheme
- The key is the cathode, where Cu²⁺ is reduced to copper.
- The copper anode dissolves (Cu → Cu²⁺ + 2e⁻), replacing the Cu²⁺ removed, so the concentration (color) stays the same.
Question 4
5 marksHow the atoms of a molecule are bonded decides its shape, and its shape and bonds decide how strongly the molecules hold one another.
Explain, with the ammonium ion as an example, how a coordinate covalent bond is formed.
Answer
In a coordinate (dative) bond, both electrons of the shared pair come from one atom. In ammonia the nitrogen has a lone pair; a hydrogen ion, H⁺, has an empty 1s orbital and no electrons. The nitrogen donates its lone pair to the H⁺, and the pair is shared between them: . Once formed, the four N–H bonds of NH₄⁺ are all alike.
Marking scheme
- Both shared electrons come from one atom (the donor).
- In NH₄⁺ the N of NH₃ donates its lone pair to H⁺, which has an empty orbital.
Use VSEPR theory to predict the shapes and bond angles of BF₃ and H₂O.
Answer
BF₃: boron has three bond pairs and no lone pair; three pairs spread as far apart as possible in a plane: trigonal planar, F–B–F angle 120°.
H₂O: oxygen has two bond pairs and two lone pairs, four pairs in a tetrahedral arrangement; the lone pairs repel more strongly and squeeze the bonds together: bent (angular, V-shaped), H–O–H angle about 104.5°.
Marking scheme
- BF₃: trigonal planar, 120° (three bond pairs, no lone pair).
- H₂O: bent (angular), about 104.5° (two bond pairs, two lone pairs).
Ethanol, CH₃CH₂OH, and methoxymethane, CH₃–O–CH₃, have the same molecular formula, C₂H₆O, and almost the same size. Yet ethanol is a liquid that boils at 78 °C, while methoxymethane is a gas that boils at −24 °C. Explain.
Answer
Ethanol has a hydrogen joined to oxygen (an O–H group), so its molecules are held together by hydrogen bonds, the H of one molecule's O–H to the O of the next, which take much energy to break. In methoxymethane every hydrogen is joined to carbon, so although its oxygen has lone pairs, there is no O–H hydrogen to form hydrogen bonds between its molecules: they are held only by weak dipole and van der Waals forces, and it boils far lower.
Marking scheme
- Ethanol has an O–H group, so hydrogen bonds hold its molecules; methoxymethane's hydrogens are all on carbon, so it has only weak forces between molecules.
OR
Pasang notices that a party balloon filled with hydrogen goes flat sooner than one blown up with air.
State Graham's law of diffusion, and explain why a lighter gas diffuses faster.
Answer
Graham's law: at the same temperature and pressure, the rate of diffusion of a gas is inversely proportional to the square root of its density (or its molar mass): , .
At the same temperature all gases have the same average kinetic energy, ; so molecules of smaller mass must move faster, and they spread out (and escape through small holes) faster.
Marking scheme
- Rate of diffusion inversely proportional to the square root of density (molar mass), at the same temperature and pressure.
- Same average kinetic energy at the same temperature, so lighter molecules move faster.
A certain volume of oxygen takes 80 s to diffuse through a small hole. How long will the same volume of hydrogen take under the same conditions? (H = 1, O = 16)
Answer
The time taken is inversely proportional to the rate, so .
Marking scheme
- Ratio of times (or rates) from the square roots of the molar masses, 2 and 32: hydrogen four times faster.
- 20 s.
Explain why Pasang's hydrogen balloon goes flat sooner than the air-filled one.
Answer
Rubber has tiny pores. Hydrogen (M = 2) diffuses out through them much faster than the oxygen and nitrogen of air (M about 29, roughly 3.8 times slower by Graham's law), so the hydrogen balloon loses its gas sooner.
Marking scheme
- Hydrogen, much lighter, diffuses out through the rubber's pores faster than air (Graham's law).
Question 5
5 marksHydrogen releases more energy for its mass than any other fuel. In a hydrogen–oxygen fuel cell it reacts with oxygen to give electricity and water.
What are isotopes?
Answer
Isotopes are atoms of the same element (the same atomic number) with different mass numbers, because they have different numbers of neutrons: hydrogen has three, protium ¹₁H, deuterium ²₁H and tritium ³₁H.
Marking scheme
- Atoms of the same element (same atomic number) with different mass numbers (different numbers of neutrons).
Heavy water, D₂O, and ordinary water, H₂O, have the same chemical properties but different physical properties. Why?
Answer
Protium and deuterium have the same electronic configuration (1s¹), and chemical properties depend on electrons, so they react alike; but deuterium is twice as heavy, and properties that depend on mass (density, melting and boiling points, rates of reaction) differ.
Marking scheme
- Same electronic configuration (same chemistry), but different masses, which change physical properties.
Burning 1 g of hydrogen gives about 143 kJ, and 1 g of petrol about 50 kJ. What mass of petrol gives the same heat as 2.0 kg of hydrogen?
Answer
2.0 kg of hydrogen gives kJ. Petrol for the same: g, about 5.7 kg (nearly three times the mass of hydrogen).
Marking scheme
- About 5.7 kg (5720 g) of petrol.
Anjila argues that hydrogen fuel-cell buses would cut both Kathmandu's air pollution and Nepal's spending on imported fuel. Her friend replies that most of the world's hydrogen is made from natural gas, so the buses would help with neither. Judge both claims, with reasons.
Answer
Air pollution: Anjila is right, wherever the hydrogen comes from. A fuel cell's only product is water, so the buses would give out no smoke, carbon monoxide or carbon dioxide in the city's streets.
Imports: it depends on how the hydrogen is made. Nepal has no natural gas, so hydrogen made from it would have to be imported, or made from imported gas, and making it gives out CO₂ at the plant: on that the friend is right. But hydrogen made by the electrolysis of water with Nepal's own hydroelectricity would replace imported diesel, so the claim holds only for that route.
Marking scheme
- Air pollution: true whatever the source, since the fuel cell's only exhaust is water.
- Imports: hydrogen from natural gas would itself be imported (and give CO₂ where it is made); only hydrogen from water by Nepal's hydroelectricity cuts imports.
Question 6
5 marksPatients with severe diarrhea are given oral rehydration solution (ORS), which contains both salt and glucose dissolved in clean water.
What are micronutrients and macronutrients? Give one example of each.
Answer
Micronutrients are nutrients the body needs in small amounts (milligrams or micrograms a day): the vitamins and minerals, for example iron, zinc, iodine or vitamin A.
Macronutrients are nutrients needed in large amounts (grams a day): carbohydrates, proteins and fats (for example the starch of rice).
Marking scheme
- Micronutrients: needed in small amounts, with an example (iron, zinc, iodine, a vitamin).
- Macronutrients: needed in large amounts, with an example (carbohydrate, protein, fat).
A family has no ORS packet and gives a child with diarrhea plain salt water; another family, short of water, dissolves a 1-litre ORS packet in only a quarter of a litre. Explain why each drink rehydrates the child poorly.
Answer
Salt water without glucose: in a gut with diarrhea, sodium is taken in mainly by the sodium–glucose cotransporter, which carries Na⁺ and glucose into the cells together. With no glucose, little sodium is absorbed, so little water follows it into the body: the salt and water mostly pass out again.
The packet in too little water: the drink is four times too concentrated, more concentrated than the body's fluids. Water moves by osmosis towards the more concentrated side, so water is drawn out of the body into the gut, and the child loses even more water.
Marking scheme
- Without glucose the cotransporter takes in little sodium (they go in together), so little water follows.
- Too concentrated: osmosis draws water from the body into the gut, so more water is lost.
Every winter in Nepal some people are poisoned in closed rooms with a charcoal stove burning. Carbon monoxide binds to the iron of hemoglobin about 200 times more strongly than oxygen does, yet the first treatment is to give the patient pure oxygen to breathe. Explain why pure oxygen helps.
Answer
CO and O₂ compete for the same iron of hemoglobin, and the binding is reversible: . Air is only about 21% oxygen; pure oxygen raises the oxygen's concentration about five times, which shifts the balance towards Hb–O₂, pushing CO off the iron faster so that it is breathed out and the blood can carry oxygen again.
Marking scheme
- CO and O₂ compete reversibly for hemoglobin's iron; a much higher oxygen concentration shifts the balance, displacing CO so the blood carries oxygen again.
Question 7
5 marksAsmita wants to know whether an unknown organic compound contains nitrogen, sulphur or a halogen. She fuses it with sodium metal and makes the sodium extract (Lassaigne's extract).
Why is the organic compound fused with sodium?
Answer
Fusing with sodium turns the nitrogen, sulphur and halogen, held by covalent bonds in the compound, into ionic sodium compounds (NaCN, Na₂S, NaX), which dissolve in water and can be tested for as ions.
Marking scheme
- To convert the covalently bonded N, S and halogens into ionic, water-soluble sodium salts (NaCN, Na₂S, NaX).
The extract, made acidic with dilute nitric acid and boiled, gives a white precipitate with silver nitrate that dissolves easily in dilute ammonia. Which halogen is present? Write the equations for its conversion into the sodium salt during fusion and for the formation of the precipitate.
Answer
Chlorine. (A white, curdy precipitate that dissolves easily in dilute ammonia is silver chloride.)
During fusion: (the chlorine of the compound joins the sodium).
In the test: (white precipitate).
Marking scheme
- Chlorine, with the fusion equation Na + Cl → NaCl.
- NaCl + AgNO₃ → AgCl (white precipitate) + NaNO₃.
Asmita tests a second compound. Its extract, made acidic with dilute nitric acid but not boiled, gives a white precipitate with silver nitrate. A fresh portion, boiled with dilute nitric acid before the silver nitrate is added, gives no precipitate. What do these results show about the elements in the second compound? Explain.
Answer
The compound contains nitrogen but no halogen. Without boiling, a cyanide in the extract (NaCN, formed from the compound's nitrogen during fusion) gives a white precipitate of silver cyanide, . Boiling with nitric acid drives the cyanide off as HCN gas, . After boiling there is no precipitate, so there is no halide in the extract: the first precipitate was not a silver halide. (A sulphide would have given black Ag₂S, not white.)
Marking scheme
- The first white precipitate was AgCN from cyanide: the compound contains nitrogen.
- Boiling removes the cyanide (as HCN); no precipitate after it, so no halogen is present.
Question 8
5 marksAlkanes can be made from the sodium salts of carboxylic acids in two different ways.
What is decarboxylation? Name the reagent used to decarboxylate the sodium salt of a carboxylic acid.
Answer
Decarboxylation is the removal of the carboxyl group (as CO₂, here trapped as sodium carbonate) from a carboxylic acid or its salt, so the alkane formed has one carbon fewer than the salt.
The reagent is soda lime (sodium hydroxide with quicklime, NaOH + CaO), heated with the dry salt.
Marking scheme
- Removal of the –COOH (–COONa) group as CO₂ (Na₂CO₃), giving an alkane with one carbon fewer.
- Soda lime (NaOH + CaO), heated.
Write the equations for making ethane (i) by heating sodium propanoate with soda lime and (ii) by Kolbe's electrolysis of sodium ethanoate.
Answer
i.
ii. Kolbe's electrolysis of a concentrated aqueous solution of sodium ethanoate gives ethane at the anode:
(ethane and carbon dioxide at the anode; hydrogen and sodium hydroxide at the cathode).
Marking scheme
- Decarboxylation of sodium propanoate to ethane, balanced.
- Kolbe's electrolysis of sodium ethanoate to ethane (with CO₂, NaOH and H₂), balanced.
Cetane, hexadecane, CH₃(CH₂)₁₄CH₃, is the standard of a good diesel fuel, with cetane number 100. Would it make a good petrol? Give a reason.
Answer
No. A long straight chain like cetane ignites very readily under compression: that is what a diesel engine needs, since it has no spark. A petrol engine needs a fuel that resists igniting by itself until the spark lights it; cetane would ignite early and knock badly (straight chains have very low octane numbers).
Marking scheme
- No: it ignites easily under compression (good for diesel), so in a petrol engine it would knock (low octane number).
Question 9
5 marksYangchen's uncle grows vegetables near a pond in Chitwan. Each season he spreads 100 kg of an NPK fertilizer marked 20 : 20 : 10 and, to be sure, 50 kg of urea as well. After the monsoon the pond turns green and its fish die.
What do the numbers 20 : 20 : 10 on the sack mean?
Answer
They are the percentages of the three primary nutrients: 20% nitrogen (N), 20% phosphorus counted as P₂O₅ and 10% potassium counted as K₂O.
Marking scheme
- Percentages of N, of P (as P₂O₅) and of K (as K₂O): 20, 20 and 10.
Explain any two characteristics of a good fertilizer.
Answer
Any two, each with its reason:
- Soluble in water, so that plants can take up its nutrients easily.
- Contains enough of the nutrients it is meant to supply.
- Safe for plants: it doesn't burn roots or seedlings and has no toxic impurities.
- Stable: it doesn't lose its nutrients in storage, and releases them when the plants need them.
- Does not make the soil acidic, since acidic soil holds fewer nutrients.
- Affordable to farmers.
Marking scheme
- One characteristic, explained.
- A second characteristic, explained.
His crop needs about 25 kg of nitrogen in a season. Calculate the nitrogen he adds (urea is 46% nitrogen), and use your answer to explain why the pond turned green and its fish died.
Answer
NPK: 20% of 100 kg = 20 kg of nitrogen. Urea: 46% of 50 kg = 23 kg. In all 43 kg, about 18 kg more than the crop can use (and the urea alone nearly supplied the crop's need).
The crop can't take up the extra, so the monsoon rain washed the surplus nitrate (with phosphate) into the pond. These nutrients fed a huge growth of algae (an algal bloom), turning the water green; when the algae died, the bacteria decomposing them used up the water's dissolved oxygen, and the fish suffocated (eutrophication).
Marking scheme
- Nitrogen added 20 + 23 = 43 kg, about 18 kg more than the crop needs.
- The surplus nitrate is washed into the pond: algal bloom, decomposition uses up the oxygen, fish die (eutrophication).
Group CLong answers, each on one content area24 marks
Question 10
8 marksPrapti analyzes the acid of vinegar in her school laboratory. It contains 40.0% carbon, 6.7% hydrogen and 53.3% oxygen by mass, and its vapor density is 30. (C = 12, H = 1, O = 16)
How does an empirical formula differ from a molecular formula?
Answer
The empirical formula gives only the simplest whole-number ratio of the atoms of each element in a compound; the molecular formula gives the actual number of atoms of each element in one molecule. The molecular formula is a whole-number multiple of the empirical formula (glucose: CH₂O and C₆H₁₂O₆).
Marking scheme
- Empirical: simplest whole-number ratio of atoms; molecular: actual numbers of atoms in a molecule (a multiple of the empirical).
Calculate the empirical formula of the acid.
Answer
| Element | % | ÷ atomic mass | ÷ smallest |
|---|---|---|---|
| C | 40.0 | 40.0 ÷ 12 = 3.33 | 1 |
| H | 6.7 | 6.7 ÷ 1 = 6.7 | 2 |
| O | 53.3 | 53.3 ÷ 16 = 3.33 | 1 |
Empirical formula: CH₂O.
Marking scheme
- Relative numbers of moles of atoms: 3.33, 6.7, 3.33.
- Simplest ratio 1 : 2 : 1, empirical formula CH₂O.
Find its molecular formula.
Answer
Molecular mass = 2 × vapor density = 2 × 30 = 60.
Empirical formula mass of CH₂O = 12 + 2 + 16 = 30, so .
Molecular formula: C₂H₄O₂ (ethanoic acid, CH₃COOH).
Marking scheme
- Molecular mass 60 (2 × vapor density).
- n = 2, molecular formula C₂H₄O₂.
When 6.0 g of the acid burns completely, the carbon dioxide formed measures 4.48 L at STP. Prapti's partner says that the oxygen used, measured at 27 °C and 1 atm, must also be 4.48 L, "because the equation uses as many moles of oxygen as of carbon dioxide". Write the balanced equation for the combustion, and judge the claim with a calculation.
Answer
6.0 g is mol of acid. It uses mol of O₂ and gives 0.20 mol of CO₂ (0.20 × 22.4 = 4.48 L at STP): the moles are indeed equal.
But the oxygen is measured at 27 °C (300 K), not 0 °C, and a gas expands when warmer:
So the claim is wrong: equal moles give equal volumes only at the same temperature and pressure.
Marking scheme
- Balanced equation: CH₃COOH + 2O₂ → 2CO₂ + 2H₂O.
- 0.10 mol of acid uses 0.20 mol of O₂, the same moles as the CO₂ formed.
- At 300 K the 0.20 mol of O₂ occupies 4.93 L, not 4.48 L: the claim is wrong, as volume depends on temperature.
Question 11
8 marksZinc is extracted from zinc blende, ZnS, an ore that holds only a few percent of the mineral mixed with rock.
Explain how froth flotation concentrates a sulphide ore like zinc blende.
Answer
The powdered ore is mixed with water in a tank with a little pine oil (the frother) and a collector such as potassium ethyl xanthate. The collector clings to the sulphide grains and makes their surface water-repelling (hydrophobic), while the rock grains stay wetted by water.
Air is blown in and the mixture is stirred hard. The air bubbles stick to the water-repelling sulphide grains and carry them up into a froth, kept stable by the oil, which overflows and is collected.
The rock (gangue), wetted by water, sinks to the bottom and is removed.
Marking scheme
- Powdered ore with water, oil (frother) and a collector that makes the sulphide grains water-repelling.
- Air bubbles carry the sulphide grains up into the froth, which is collected.
- The gangue, wetted by water, sinks.
The concentrated zinc blende is roasted, not calcined. Why?
Answer
A sulphide must lose its sulphur to become an oxide, and that needs oxygen: roasting heats it in excess air. Calcination, done with little or no air, only drives off CO₂ or water from carbonate and hydrated ores.
Marking scheme
- A sulphide needs oxygen (excess air) to become the oxide; calcination has little or no air.
Write the balanced equations for the roasting of zinc blende and for the reduction of the product with coke.
Answer
Roasting:
Reduction (smelting) with coke:
Marking scheme
- 2ZnS + 3O₂ → 2ZnO + 2SO₂.
- ZnO + C → Zn + CO.
Sodium can't be extracted by reducing its compounds with coke, nor by electrolyzing an aqueous solution of sodium chloride. Explain both, and say how it is extracted.
Answer
Sodium is one of the most reactive metals: it holds on to chlorine and oxygen more strongly than carbon can pull them away, so heating its compounds with coke gives no sodium.
In aqueous solution, water is reduced at the cathode more easily than Na⁺, so hydrogen is given off instead of sodium (and any sodium formed would react with the water at once).
So sodium is extracted by the electrolysis of molten (fused) sodium chloride, with calcium chloride added to lower its melting point; sodium collects at the cathode and chlorine at the anode.
Marking scheme
- Carbon can't reduce sodium's compounds (sodium holds Cl and O more strongly than carbon).
- In water, hydrogen is discharged instead of sodium; so it is made by electrolysis of fused NaCl (with CaCl₂).
OR
In many villages of Nepal, lime (chuna) is made by heating limestone in a kiln. Quicklime is then slaked with water to make the whitewash used on walls.
Write the equations for making quicklime from limestone and for slaking it. Why does the kiln have to be very hot, and why does a heap of quicklime get hot when water is poured on it?
Answer
The kiln must reach about 900 °C because calcium carbonate is a stable compound that breaks up (thermal decomposition) only at a high temperature, giving off carbon dioxide.
Slaking is strongly exothermic: quicklime combines with water with the release of much heat, so the heap gets hot (and hisses and crumbles to powdery slaked lime).
Marking scheme
- Both equations: CaCO₃ → CaO + CO₂, and CaO + H₂O → Ca(OH)₂.
- The kiln: calcium carbonate decomposes only on strong heating (about 900 °C).
- Slaking releases heat (exothermic).
Carbon dioxide bubbled through a clear solution of slaked lime (limewater) turns it milky. Why?
Answer
Carbon dioxide reacts with calcium hydroxide to form calcium carbonate, which is insoluble in water, so its fine white particles make the solution milky: .
Marking scheme
- Insoluble calcium carbonate forms (Ca(OH)₂ + CO₂ → CaCO₃ + H₂O).
Write the balanced equations for making (i) bleaching powder from slaked lime and (ii) plaster of Paris from gypsum.
Answer
i.
ii. Gypsum heated gently, to about 120 °C:
(plaster of Paris, CaSO₄·½H₂O).
Marking scheme
- Ca(OH)₂ + Cl₂ → CaOCl₂ + H₂O.
- 2CaSO₄·2H₂O → (CaSO₄)₂·H₂O + 3H₂O on gentle heating (about 120 °C).
A farmer spreads agricultural lime on acidic soil. Why does this help? His neighbor mixes the lime with ammonium sulphate fertilizer before spreading it. Is that wise? Give a reason.
Answer
Lime (CaO or Ca(OH)₂) is a base: it neutralizes the acid in the soil, reducing its acidity, so the soil holds more nutrients and grows better crops.
No, it is not wise. A base with an ammonium salt gives off ammonia gas, , so the nitrogen the fertilizer was meant to supply escapes into the air and is wasted.
Marking scheme
- Lime is basic and neutralizes the soil's acidity.
- Not wise: lime and an ammonium salt release ammonia, so the fertilizer's nitrogen is lost.
Question 12
8 marksOrganic reactions happen when covalent bonds break and new ones form. Methane reacts with chlorine in sunlight, and the strength of an acid like ethanoic acid changes when atoms are swapped in its molecule.
Explain homolytic and heterolytic fission of a covalent bond, with one example of each.
Answer
Homolytic fission: the bond breaks evenly, each atom taking one electron of the shared pair, giving two free radicals (neutral, each with an unpaired electron). It happens with non-polar bonds, in light or heat:
Heterolytic fission: the bond breaks unevenly, the more electronegative atom taking both electrons, giving a cation and an anion (for carbon, a carbocation or a carbanion). It happens with polar bonds, in polar solvents:
Marking scheme
- Homolytic: each atom keeps one electron, giving free radicals.
- Heterolytic: one atom takes both electrons, giving a cation and an anion.
- A correct example of each (e.g. Br₂ → 2Br•; CH₃Cl → CH₃⁺ + Cl⁻).
Write the equations for the initiation step and the two propagation steps of the reaction of methane with chlorine in sunlight.
Answer
Initiation:
Propagation:
The chlorine atom made in the second step starts the first again, so the chain goes on.
Marking scheme
- Initiation: Cl₂ → 2Cl• in light.
- Both propagation steps, CH₄ + Cl• → CH₃• + HCl and CH₃• + Cl₂ → CH₃Cl + Cl•.
Chloroethanoic acid, ClCH₂COOH, is a stronger acid than ethanoic acid, CH₃COOH, and methanoic acid, HCOOH, is stronger than ethanoic acid. Explain both with the inductive effect.
Answer
An acid is stronger when its anion, RCOO⁻, is more stable. Chlorine has a −I effect: it pulls electrons away along the bonds, spreading out the negative charge of ClCH₂COO⁻ and stabilizing it, so chloroethanoic acid gives up H⁺ more readily.
The methyl group has a +I effect: it pushes electrons towards the carboxyl group, concentrating the negative charge of CH₃COO⁻ and making it less stable. Methanoic acid has an H in its place, which pushes no electrons, so methanoic acid is the stronger.
Marking scheme
- Cl (−I) withdraws electrons, stabilizing the anion, so chloroethanoic acid is stronger.
- CH₃ (+I) releases electrons, destabilizing the anion, so ethanoic acid is weaker than methanoic acid.
Toluene, C₆H₅CH₃, is nitrated faster than benzene, and the nitro group goes mainly to the ortho and para positions. Why?
Answer
The methyl group pushes electrons into the ring, making it richer in electrons than benzene's, so the electrophile NO₂⁺ attacks it faster (the CH₃ group activates the ring), and the electron density is raised most at the ortho and para positions, where the nitro group goes.
Marking scheme
- CH₃ releases electrons into the ring (activating it, an ortho–para director), so the electrophile attacks faster at the ortho and para positions.
Your score
0 / 75
48 questions not marked yet
| Physical Chemistry | – | Full marks 28 |
| Inorganic Chemistry | – | Full marks 20 |
| Organic Chemistry | – | Full marks 18 |
| Applied Chemistry | – | Full marks 9 |
Marks lost, by unit
Mark a question to see your score here.
Found a mistake? Please tell us.
