← Grade 11 Chemistry Model Papers
Grade 11 Chemistry Model Paper 1
Full marks: 75Time: 3 hours
Answer every question; where a question has an OR question, answer either one.
A full practice run of NEB's Grade 11 Chemistry paper (Che. 301): 75 marks in 3 hours. Question 1 is group A, 11 multiple-choice items; questions 2 to 9 are group B and questions 10 to 12 group C, each of two to four parts with the marks of each part. Questions 2 and 4 in group B and Question 11 in group C have an OR question: answer either one. Take per mol, the molar volume of a gas at STP as 22.4 L and L atm/(mol K); atomic masses are given where a question needs them. Write your answers on paper as in the exam hall, then tap your choice in group A, open each other part's answer and give yourself the marks its scheme allows.
A practice paper by Science Playground, made to CDC’s Specification Grid 2077, Grade 11 Chemistry (Che. 301). Not an official CDC or NEB paper; the real NEB Grade 11 exam may differ.
Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.
Paper to print (PDF, 6 pages) Answer key and marking scheme
Group AMultiple choice11 marks
Question 1
11 × 1 = 11Choose the correct option for each of the following questions.
What is one atomic mass unit (amu)?
Pick an answer to see why.
Which set of quantum numbers is not possible for an electron?
Pick an answer to see why.
What is the shape of the ammonia molecule, NH₃?
Pick an answer to see why.
How many molecules are there in 3.4 g of ammonia? (N = 14, H = 1)
Pick an answer to see why.
A gas occupies 600 mL at 27 °C. What volume will it occupy at 127 °C, the pressure staying the same?
Pick an answer to see why.
Why is nitrogen gas so unreactive at room temperature?
Pick an answer to see why.
Barium ions are poisonous, yet a patient drinks a barium compound before an X-ray of the stomach. Which compound must it be, and why? (The stomach contains dilute hydrochloric acid.)
Pick an answer to see why.
Which of these is not one of the four factors of production?
Pick an answer to see why.
In the contact process, sulphur trioxide is absorbed in 98% sulphuric acid and not in water. Why?
Pick an answer to see why.
Why does the sodium hydroxide solution that comes out of a diaphragm cell always contain sodium chloride?
Pick an answer to see why.
The overall change in the Solvay process is . What is the greatest mass of sodium carbonate that 117 kg of sodium chloride can give? (Na = 23, Cl = 35.5, C = 12, O = 16)
Pick an answer to see why.
Group BShort answers, each on one content area40 marks
Question 2
5 marksThe ions N³⁻, O²⁻, F⁻, Na⁺, Mg²⁺ and Al³⁺ all have the same number of electrons.
What are isoelectronic species? How many electrons does each of these ions have, and which noble gas has the same arrangement?
Answer
Isoelectronic species are atoms and ions that have the same number of electrons (and so the same electronic configuration).
Each of these ions has 10 electrons, 1s² 2s² 2p⁶, the arrangement of neon.
Marking scheme
- Isoelectronic: atoms or ions with the same number of electrons.
- 10 electrons each, the configuration of neon (1s² 2s² 2p⁶).
Arrange the six ions in order of increasing ionic radius.
Answer
All have 10 electrons, so the one with the most protons (Al³⁺, 13) pulls them in most and is smallest; the one with the fewest (N³⁻, 7) is largest.
Marking scheme
- Al³⁺ < Mg²⁺ < Na⁺ < F⁻ < O²⁻ < N³⁻.
A sodium atom (186 pm) is more than twice the size of a fluorine atom (71 pm), yet the Na⁺ ion (102 pm) is smaller than the F⁻ ion (133 pm). Explain why the order is reversed when the atoms become ions.
Answer
The atoms: sodium (2, 8, 1) has its outer electron in a third shell, while fluorine (2, 7) has only two shells, and across period 2 its 9 protons pull those shells in tightly. So the sodium atom is much the larger.
The ions: Na⁺ loses its whole third shell and F⁻ gains an electron in its second, so both now have the same 10 electrons in the same two shells (2, 8). What differs is the nucleus: 11 protons in Na⁺ pull on those 10 electrons, only 9 in F⁻. The stronger pull draws Na⁺'s electrons closer, so Na⁺ is the smaller ion.
Marking scheme
- Atoms: Na has three shells and F only two, so the Na atom is larger.
- Ions: both have the same 10 electrons in two shells, but Na⁺ has more protons (11 against 9), pulling them closer, so Na⁺ is smaller.
OR
Bohr's model of the hydrogen atom explained the lines of hydrogen's spectrum, and was later replaced by the quantum mechanical model.
State any two postulates of Bohr's atomic model.
Answer
Any two of these:
- The electron revolves round the nucleus only in certain circular orbits of fixed energy (stationary states, energy levels).
- While it stays in an allowed orbit, the electron neither gives out nor takes in energy.
- Only those orbits are allowed in which the electron's angular momentum is a whole-number multiple of : .
- Energy is given out or taken in only when the electron jumps from one orbit to another, as one photon of energy .
Marking scheme
- One correct postulate.
- A second correct postulate.
The electron of a hydrogen atom falls from the third orbit to the second. To which spectral series does the line belong, and in which region of the spectrum is it?
Answer
All jumps that end on n = 2 make the Balmer series, which lies in the visible region (this line, 3 → 2, is the red line, the first of the series).
Marking scheme
- Balmer series, visible region.
Before the neutron was found, Bibisha reads, some scientists thought the nucleus held electrons as well as protons. A nucleus is about m across. Use Heisenberg's uncertainty principle to find the least uncertainty in the velocity of an electron confined in a nucleus, and use your answer to judge the idea. ( J s, mass of an electron kg, speed of light m/s)
Answer
That uncertainty alone is about 20 times the speed of light, which nothing can reach. An electron held inside a nucleus would have to move faster than light, so electrons can't be confined in the nucleus: the idea is wrong (they are outside it, round it).
Marking scheme
- m/s.
- Greater than the speed of light, which is impossible, so electrons can't be in the nucleus.
Question 3
5 marksDipesh drops zinc granules into very dilute nitric acid. The zinc dissolves, but no gas comes off. When the solution is later warmed with sodium hydroxide, it gives ammonia. The skeleton equation is:
Define oxidation and reduction in terms of oxidation number.
Answer
Oxidation is an increase in the oxidation number of an element; reduction is a decrease in the oxidation number of an element.
Marking scheme
- Oxidation: increase in oxidation number; reduction: decrease in oxidation number.
Balance the equation by the oxidation number method.
Answer
Oxidation numbers that change:
- zinc: 0 in Zn → +2 in Zn(NO₃)₂, an increase of 2;
- nitrogen: +5 in HNO₃ → −3 in NH₄⁺ (of NH₄NO₃), a decrease of 8.
To make the increase equal the decrease, take 4 Zn (4 × 2 = 8) for every N reduced:
Count the nitrogen on the right: 4 × 2 = 8 in zinc nitrate and 2 in ammonium nitrate, 10 in all, so 10 HNO₃. Then hydrogen: 10 on the left, 4 in NH₄⁺, so 6 H go into 3 H₂O:
Check oxygen: 30 on the left; 24 + 3 + 3 = 30 on the right.
Marking scheme
- Changes in oxidation number found: Zn 0 → +2 (2) and N +5 → −3 (8), so 4 Zn to 1 N reduced.
- Balanced equation: 4Zn + 10HNO₃ → 4Zn(NO₃)₂ + NH₄NO₃ + 3H₂O.
Name the oxidizing agent and the reducing agent. In your balanced equation, what fraction of the nitric acid molecules is actually reduced? Explain what the others do.
Answer
Zinc is the reducing agent (it is oxidized, giving electrons); nitric acid is the oxidizing agent (its nitrogen is reduced).
Only one of the ten HNO₃ (a tenth) is reduced, to the NH₄⁺ ion (+5 to −3). The other nine keep nitrogen at +5: eight end up as the nitrate ions of zinc nitrate and one as the nitrate ion of ammonium nitrate. They act only as an acid, supplying nitrate ions to the salts, not as an oxidizing agent.
Marking scheme
- Zinc is the reducing agent and nitric acid (its nitrogen) the oxidizing agent.
- Only 1 of the 10 (a tenth) is reduced; the other 9 keep N at +5 and only form the nitrate ions of the salts (act as an acid).
Question 4
5 marksNitrogen dioxide, a brown gas, and dinitrogen tetroxide, colorless, are in equilibrium in a sealed 2.0 L flask at 100 °C:
At equilibrium the flask contains 0.040 mol of N₂O₄ and 0.24 mol of NO₂.
Chemical equilibrium is said to be dynamic. Explain what this means, using this reaction.
Answer
At equilibrium the reaction has not stopped: N₂O₄ molecules are still splitting into NO₂, and NO₂ molecules are still joining into N₂O₄. The two reactions go on at the same rate, so the amount of each gas (and so the color of the flask) stays the same. The equilibrium is a balance of two moving processes, not a standstill.
Marking scheme
- Both the forward and the backward reaction still go on at equilibrium.
- Their rates are equal, so the concentrations (and color) stay constant.
Write the expression for and calculate its value.
Answer
Concentrations: mol/L and mol/L.
Marking scheme
- , with concentrations 0.020 and 0.12 mol/L.
- mol/L.
The flask is squeezed to half its volume at the same temperature. Which way does the equilibrium shift? Give a reason.
Answer
Backward, towards N₂O₄. Squeezing raises the pressure; by Le Chatelier's principle the equilibrium shifts to the side with fewer gas molecules, and one N₂O₄ takes the place of two NO₂. (The brown color first darkens as the gas is compressed, then fades a little as NO₂ joins up.)
Marking scheme
- Towards N₂O₄, because higher pressure favors the side with fewer gas molecules (1 against 2).
OR
Ujwal fills a 5.0 L cylinder with 3.2 g of oxygen at 27 °C (O = 16).
Explain from the kinetic theory of gases why the gas exerts a pressure on the walls of the cylinder, and why the pressure rises if the cylinder is warmed.
Answer
The gas molecules move fast and at random in straight lines, and keep colliding with the walls; each collision pushes on the wall, and the pressure is the total force of these collisions on each unit area.
Warming the gas raises the average kinetic energy of the molecules (it is proportional to the absolute temperature), so they move faster, hit the walls more often and harder, and the pressure rises.
Marking scheme
- Pressure comes from the molecules' collisions with the walls.
- Higher temperature, faster molecules (greater average kinetic energy): more frequent and harder collisions, so higher pressure.
Calculate the pressure of the oxygen in the cylinder.
Answer
Marking scheme
- 0.10 mol of O₂ (molar mass 32) and T = 300 K.
- atm.
Ujwal also has cylinders of hydrogen and of ammonia. At the same high pressure and temperature, which of the three gases, hydrogen, oxygen or ammonia, would you expect to depart most from ? Give a reason.
Answer
Ammonia. At high pressure the molecules are crowded together, so the attractions between them, which an ideal gas is assumed not to have, begin to matter. Ammonia's molecules are polar and attract one another strongly (they can even hydrogen bond), far more than the weak van der Waals forces between the non-polar H₂ or O₂ molecules, so ammonia departs most (it is also much the easiest of the three to liquefy).
Marking scheme
- Ammonia, because its molecules attract one another most strongly (polar, hydrogen bonding), and attractions are what make a gas depart from PV = nRT.
Question 5
5 marksShreya buys a bottle of "20 volume" hydrogen peroxide at a pharmacy in Pokhara to clean a cut. When she pours some on the wound, it froths.
What does "20 volume" hydrogen peroxide mean?
Answer
1 mL of the solution gives 20 mL of oxygen at STP when it decomposes completely (about a 6% solution).
Marking scheme
- 1 mL of it gives 20 mL of oxygen at STP on decomposition.
Why does the hydrogen peroxide froth on the wound?
Answer
The enzyme catalase in blood speeds up the decomposition of hydrogen peroxide, , and the bubbles of oxygen given off make the froth.
Marking scheme
- Catalase in blood decomposes it, giving bubbles of oxygen.
What volume of oxygen at STP can 5 mL of this solution give?
Answer
Each mL gives 20 mL of oxygen, so 5 mL gives 100 mL of oxygen at STP.
Marking scheme
- 100 mL.
Three months later the pharmacist tests Shreya's bottle, which has stood open in a warm, bright room, and finds it is now only "10 volume". Explain how it lost strength, and calculate what fraction of its hydrogen peroxide has decomposed and the volume of oxygen at STP that 100 mL of it has lost.
Answer
Hydrogen peroxide slowly decomposes, , and light and heat speed this up. In a warm, bright room the oxygen formed escaped from the open bottle, leaving water in place of peroxide, so the solution grew weaker.
The volume strength is proportional to the H₂O₂ left: from 20 to 10 volume means half the H₂O₂ has decomposed. 100 mL of 20 volume could give 2000 mL of oxygen; now it can give only 1000 mL, so it has lost 1000 mL (1.0 L) of oxygen at STP.
Marking scheme
- It decomposes to water and oxygen, faster in heat and light, and the oxygen escapes, so the solution weakens.
- Half has decomposed; 100 mL has lost 2000 − 1000 = 1000 mL (1.0 L) of oxygen at STP.
Question 6
5 marksA health worker tests the tube well of Sneha's family in Nawalparasi. The water has 80 µg of arsenic per litre. (The WHO advises at most 10 µg/L in drinking water; Nepal's standard allows 50 µg/L.)
What is meant by metal toxicity? Where does the arsenic in the Terai's groundwater come from?
Answer
Metal toxicity (metal poisoning) is the harm done by metals that build up in the soft tissues of the body, such as the kidneys, liver, brain, nerves and blood.
The arsenic in the Terai's groundwater is natural: it dissolves from the rocks underground into the water that tube wells draw.
Marking scheme
- Metal toxicity: harm done by metals that build up in the body's tissues.
- The arsenic dissolves naturally from rocks into the groundwater.
The family has two ideas: (i) keep using their own well but boil the water first, or (ii) carry water from a neighbor's tube well that tests at 30 µg/L. Judge each idea, with reasons.
Answer
(i) Boiling won't help. Boiling kills germs, but arsenic is an element dissolved in the water as its compounds (arsenite and arsenate); heat doesn't destroy it or drive it off. As water boils away, the same arsenic is left in less water, so the boiled water is even more concentrated in arsenic.
(ii) Better, but not truly safe. 30 µg/L is within Nepal's limit of 50 µg/L, but still three times the WHO's 10 µg/L, and arsenic does its harm by building up over years. It is better than their own well (80 µg/L), but a source below 10 µg/L, or an arsenic filter, would be the safe choice.
Marking scheme
- Boiling doesn't remove dissolved arsenic (an element, not a germ); it concentrates it as water evaporates.
- 30 µg/L meets Nepal's 50 but is three times the WHO's 10: better than 80, but not safe for years of drinking.
Sneha's grandfather, who has drunk from the well for thirty years, has dark spots and thick, hard skin on his palms and soles. Her younger brother, who has drunk the same water for two years, shows no signs at all, so he says the water can't be harming him. Is he right? Explain.
Answer
No. The grandfather has arsenicosis, chronic arsenic poisoning, which comes from small doses building up over many years; its signs appear only after long exposure. The brother has had only two years of the same doses, so the damage may not show yet: no signs now doesn't mean no harm.
Marking scheme
- No: arsenicosis is chronic poisoning from doses building up over years, so the absence of signs after two years doesn't show the water is safe.
Question 7
5 marksFour alcohols and three ethers share the molecular formula C₄H₁₀O. One of the alcohols is butan-1-ol, CH₃CH₂CH₂CH₂OH.
Define functional isomerism.
Answer
Functional isomerism is the isomerism in which compounds have the same molecular formula but different functional groups (so they belong to different homologous series), for example an alcohol and an ether.
Marking scheme
- Same molecular formula, different functional groups.
Write the condensed formula and IUPAC name of (i) a position isomer of butan-1-ol and (ii) a functional isomer of butan-1-ol.
Answer
i. A position isomer has the –OH on another carbon of the same chain: CH₃CH(OH)CH₂CH₃, butan-2-ol.
ii. A functional isomer is an ether: CH₃OCH₂CH₂CH₃, 1-methoxypropane (or CH₃CH₂OCH₂CH₃, ethoxyethane; or CH₃OCH(CH₃)₂, 2-methoxypropane).
Marking scheme
- Position isomer with formula and name: butan-2-ol, CH₃CH(OH)CH₂CH₃.
- Functional isomer with formula and name: an ether such as 1-methoxypropane, ethoxyethane or 2-methoxypropane.
Which one of the four alcohols of formula C₄H₁₀O shows optical isomerism? Give the reason, and say why the other three don't.
Answer
Butan-2-ol, CH₃–C*H(OH)–CH₂CH₃. Its carbon 2 holds four different groups, H, OH, CH₃ and C₂H₅: it is a chiral carbon, so the molecule has two non-superimposable mirror-image forms that turn plane-polarized light in opposite directions.
In the other three no carbon carries four different groups: butan-1-ol's CH₂OH carbon has two H; 2-methylpropan-1-ol's CH carbon has two CH₃; 2-methylpropan-2-ol's central carbon has three CH₃.
Marking scheme
- Butan-2-ol: carbon 2 carries four different groups (H, OH, CH₃, C₂H₅), a chiral carbon.
- In the other three no carbon carries four different groups (two H or two/three CH₃ on the same carbon).
Question 8
5 marksHydrogen bromide adds to propene, CH₃–CH=CH₂, but the product depends on whether a peroxide is present.
State Markovnikov's rule. What is the peroxide effect?
Answer
Markovnikov's rule: when a polar reagent HX adds to an unsymmetrical alkene, the positive part (H) goes to the carbon of the double bond that already has more hydrogen atoms, and the negative part (X) to the carbon with fewer.
Peroxide effect (Kharasch effect): in the presence of a peroxide, HBr adds to an unsymmetrical alkene against Markovnikov's rule, the Br going to the carbon with more hydrogen atoms (anti-Markovnikov addition). It works only with HBr.
Marking scheme
- Markovnikov's rule: H of HX to the doubly bonded carbon with more H.
- Peroxide effect: with a peroxide, HBr adds the other way (anti-Markovnikov).
Write the equations for the reaction of propene with HBr (i) without and (ii) with a peroxide, naming each product.
Answer
i. Without peroxide (Markovnikov addition):
2-bromopropane.
ii. With a peroxide (anti-Markovnikov addition):
1-bromopropane.
Marking scheme
- Without peroxide: CH₃CHBrCH₃, 2-bromopropane.
- With peroxide: CH₃CH₂CH₂Br, 1-bromopropane.
Two unlabelled jars hold the isomers but-1-yne, CH≡C–CH₂–CH₃, and but-2-yne, CH₃–C≡C–CH₃. Both decolorize bromine water. Suggest a chemical test that tells them apart, with its result and the reason.
Answer
Bubble or shake a little of each with ammoniacal silver nitrate solution: but-1-yne gives a white precipitate (of its silver salt), but-2-yne gives none. Only a hydrogen on a triple-bonded (sp) carbon is acidic enough to be replaced by silver: but-1-yne is a terminal alkyne with such a hydrogen (≡C–H), while both carbons of but-2-yne's triple bond carry CH₃ groups, with no hydrogen to replace. (Ammoniacal copper(I) chloride works the same way, a red precipitate with but-1-yne only.)
Marking scheme
- Ammoniacal AgNO₃ (or Cu₂Cl₂): precipitate with but-1-yne only, because only it has an acidic H on a triple-bonded carbon.
Question 9
5 marksNepal imports every sack of urea its farmers use. Urea is made from ammonia, and almost all the world's ammonia is made by Haber's process, using hydrogen from natural gas or coal.
Ammonia plants run day and night. Is this batch or continuous processing? Define it.
Answer
Continuous processing: a product is made without interruption, raw materials being fed in and product taken out all the time, under steady conditions.
Marking scheme
- Continuous processing: raw materials fed in and product taken out without stopping.
In Haber's process, , kJ. Explain why the plant uses a high pressure, about 200 atm, and why it uses an iron catalyst.
Answer
High pressure: 4 volumes of gas give 2, so by Le Chatelier's principle a high pressure shifts the equilibrium towards ammonia (and also speeds up the reaction). It isn't higher still because extra pressure costs energy and thicker, more costly equipment.
Iron catalyst (promoted with K₂O and Al₂O₃): it makes the reaction reach equilibrium much faster at the plant's temperature, so ammonia is made quickly; it doesn't change the position of the equilibrium.
Marking scheme
- High pressure: fewer gas molecules on the ammonia side (4 → 2), so the equilibrium shifts towards ammonia.
- Iron catalyst: makes equilibrium reached faster (rate), without changing the yield at equilibrium.
Nepal has no natural gas but has surplus hydroelectricity in the wet season. Some propose a "green" ammonia and urea plant, with hydrogen made by the electrolysis of water. Give one argument for such a plant and one difficulty it would face.
Answer
For: the hydrogen would come from water with the country's own wet-season hydroelectricity (now sold to India), instead of imported natural gas, giving ammonia with almost no CO₂, cutting fertilizer imports and the dependence on supply from abroad.
Difficulty: electrolysis of water is a costly way to make hydrogen unless electricity is very cheap all year (the plant runs continuously, but the surplus is seasonal); and urea also needs carbon dioxide, which a green plant would have to capture from elsewhere, such as a cement works.
Marking scheme
- An argument for: hydrogen from the country's own surplus hydroelectricity and water, no imported natural gas, little CO₂, fewer imports.
- A difficulty: electrolytic hydrogen is costly unless electricity is cheap (and it is seasonal); or urea needs CO₂ from another source.
Group CLong answers, each on one content area24 marks
Question 10
8 marksRailway workers in Biratnagar weld rails with the thermite reaction:
A charge contains 16 g of iron(III) oxide and 8.1 g of aluminium powder. (Fe = 56, Al = 27, O = 16)
What is a limiting reactant?
Answer
The limiting reactant is the reactant that is used up first in a reaction; it decides (limits) how much product can form, and the other reactants are left over in excess.
Marking scheme
- The reactant used up first, which decides the amount of product.
Find the limiting reactant.
Answer
0.10 mol of Fe₂O₃ needs mol of Al, and 0.30 mol is available, so aluminium is in excess: iron(III) oxide is the limiting reactant.
Marking scheme
- Moles: Fe₂O₃ 0.10 mol, Al 0.30 mol.
- Fe₂O₃ needs only 0.20 mol Al, so Fe₂O₃ is limiting.
Calculate the mass of iron that can be formed and the mass of aluminium left over.
Answer
1 mol of Fe₂O₃ gives 2 mol of Fe, so 0.10 mol gives 0.20 mol of Fe: 11.2 g of iron.
Aluminium used: 0.20 mol; left over mol: 2.7 g of aluminium.
Marking scheme
- Iron formed 11.2 g.
- Aluminium left over 2.7 g.
The workers collect only 9.5 g of iron from this charge. Calculate the percentage yield. Their foreman proposes adding more aluminium powder to each charge to raise the yield. Would that help? Explain, and say where the missing iron is more likely to have gone.
Answer
No, more aluminium won't help. Iron(III) oxide is the limiting reactant and the aluminium is already in excess (0.10 mol more than needed), so the most iron the charge can give stays 11.2 g however much aluminium is added; the extra aluminium would only be wasted.
The missing 1.7 g is more likely lost than never formed: molten iron splashing out, iron left mixed with the aluminium oxide slag, or powders not well mixed so that some oxide never met aluminium. Better mixing and collection would raise the yield.
Marking scheme
- Percentage yield about 85% (84.8%).
- More aluminium can't help: Fe₂O₃ is limiting and Al is already in excess, so the theoretical yield stays 11.2 g.
- The shortfall is from losses (splashing, iron in the slag) or poor mixing, not too little aluminium.
Question 11
8 marksIn the school laboratory, Nishant heats a mixture of ammonium chloride and slaked lime in a hard-glass test tube and collects the gas in an upside-down gas jar.
Write the balanced equation for the reaction. Explain why the gas is collected in an upside-down jar, and why it is dried with quicklime and not with concentrated sulphuric acid.
Answer
Ammonia is lighter than air and very soluble in water, so it is collected by downward displacement of air in an upside-down jar, not over water.
It is a base, so it would react with an acidic drying agent such as concentrated sulphuric acid (forming ammonium sulphate); quicklime, CaO, is a base itself and dries it without reacting.
Marking scheme
- Balanced equation: 2NH₄Cl + Ca(OH)₂ → CaCl₂ + 2NH₃ + 2H₂O.
- Upside-down jar: ammonia is lighter than air (and too soluble to collect over water).
- Quicklime: ammonia is a base and would react with the acid (forming ammonium sulphate).
A moist red litmus paper held at the mouth of the jar turns blue. Why?
Answer
Ammonia dissolves in the water of the moist paper to form ammonium hydroxide, which gives OH⁻ ions: . The solution is basic, so it turns red litmus blue.
Marking scheme
- Ammonia dissolves in water giving OH⁻ (NH₄OH), a base, which turns red litmus blue.
Write the equations for what happens when (i) a glass rod dipped in concentrated hydrochloric acid is held at the mouth of the jar, and (ii) ammonia is passed into copper sulphate solution until it is in excess.
Answer
i. Dense white fumes of ammonium chloride:
ii. First a pale blue precipitate of copper(II) hydroxide, which dissolves in excess ammonia to give a deep blue solution of tetraamminecopper(II) sulphate:
(overall, ).
Marking scheme
- NH₃ + HCl → NH₄Cl (white fumes).
- Deep blue [Cu(NH₃)₄]SO₄ formed (with excess ammonia), with a correct equation.
Nishant then does the fountain experiment: a few drops of water squirted into a flask of ammonia make water rush up a tube from a beaker below. His teacher warns him that the flask and the ammonia must be perfectly dry beforehand, and that if the ammonia is mixed with some air, the water will stop before the flask is full. Explain both warnings.
Answer
Dry flask and gas: ammonia is so soluble that any water already in the flask would dissolve much of it before the experiment starts, so the pressure would already be low, and the few drops squirted in would dissolve too little gas to make a strong fountain.
Air in the ammonia: the fountain works because the dissolving ammonia leaves almost empty space behind, and air pressure pushes water in to fill it. Air hardly dissolves in water, so it stays as gas and takes up its share of the flask: the water rises only until it fills the space the ammonia left, and stops short of the top.
Marking scheme
- Water present beforehand would dissolve the ammonia early (it is extremely soluble), so there is too little gas left to dissolve and the pressure drop is small.
- Air doesn't dissolve, so it stays and fills part of the flask: water fills only the ammonia's share.
OR
In a fume cupboard, Rabina adds concentrated hydrochloric acid to manganese dioxide in a flask and warms it. The gas passes through a bottle of water, then a bottle of concentrated sulphuric acid, and is collected in an upright gas jar.
Write the balanced equation for the reaction. Explain why the gas is passed through water and then through concentrated sulphuric acid.
Answer
The water removes the hydrogen chloride gas that escapes with the chlorine (HCl is far more soluble in water than chlorine).
The concentrated sulphuric acid absorbs the moisture, drying the chlorine; chlorine, an acidic gas, doesn't react with it.
Marking scheme
- Balanced equation: MnO₂ + 4HCl → MnCl₂ + Cl₂ + 2H₂O.
- Water removes HCl gas.
- Concentrated H₂SO₄ dries the chlorine (removes water vapor).
Why is the gas collected in an upright jar, and not over water?
Answer
Chlorine is about 2.5 times as dense as air (molar mass 71 g/mol against about 29 for air), so it sinks and fills an upright jar by upward displacement of air; it dissolves in water, so it can't be collected over water.
Marking scheme
- Heavier than air (and soluble in water), so upward displacement of air.
Write the equations for the reaction of chlorine with (i) hot, concentrated and (ii) cold, dilute sodium hydroxide solution.
Answer
i. (sodium chloride and sodium chlorate).
ii. (sodium chloride and sodium hypochlorite).
Marking scheme
- 3Cl₂ + 6NaOH (hot, conc.) → 5NaCl + NaClO₃ + 3H₂O.
- Cl₂ + 2NaOH (cold, dilute) → NaCl + NaOCl + H₂O.
Rabina holds a strip of moist blue litmus paper in the jar of chlorine. It first turns red, then white. Explain both changes, with equations.
Answer
Red: chlorine dissolves in the water on the paper and reacts with it, giving two acids, hydrochloric and hypochlorous acid, which turn blue litmus red:
White: hypochlorous acid is unstable and gives nascent oxygen, which oxidizes the litmus dye to a colorless product, so the red paper is bleached:
Marking scheme
- Red: Cl₂ + H₂O → HCl + HOCl, acids that turn blue litmus red.
- White: HOCl → HCl + [O]; the nascent oxygen oxidizes (bleaches) the dye.
Question 12
8 marksIn 1865 August Kekulé proposed the structure of benzene, C₆H₆, shown below: a ring of six carbon atoms joined by alternate single and double bonds.
Explain three facts about benzene that Kekulé's structure, with fixed single and double bonds, can't account for.
Answer
Any three of these:
- Bond lengths: with fixed bonds, the ring would have three short C=C bonds (134 pm) and three long C–C bonds (154 pm); in fact all six carbon–carbon bonds are the same length, 139 pm.
- Unreactivity: with three double bonds, benzene should add bromine and decolorize bromine water and cold alkaline KMnO₄ as alkenes do; it doesn't, and it reacts mainly by substitution.
- Stability: benzene is far more stable than a molecule with three double bonds: its heat of hydrogenation is much less than three times that of one C=C bond.
- Ortho isomers: with fixed bonds there should be two different 1,2-disubstituted benzenes (the substituents on carbons joined by a single bond, or by a double bond), but only one is ever found.
Marking scheme
- One fact: all six C–C bonds the same length (139 pm).
- A second fact: it doesn't add like an alkene (no decolorizing of bromine water); it substitutes.
- A third fact: extra stability (low heat of hydrogenation), or only one 1,2-disubstituted isomer.
Write the equation for the nitration of benzene, with the reagents and conditions, and name the electrophile.
Answer
Benzene is warmed with a mixture of concentrated nitric and sulphuric acids (the nitrating mixture), giving nitrobenzene. The electrophile is the nitronium ion, NO₂⁺, formed when sulphuric acid protonates nitric acid: .
Marking scheme
- Equation with conc. HNO₃ and conc. H₂SO₄ at about 50–60 °C, giving nitrobenzene.
- Electrophile: the nitronium ion, NO₂⁺.
Benzene is unsaturated, yet it reacts with bromine (with an FeBr₃ catalyst) by substitution and not by addition. Explain why.
Answer
Benzene's six π electrons are delocalized over the whole ring (resonance), which gives it a special stability (aromatic stability, the resonance energy).
In substitution, the electrophile takes the place of an H and the ring keeps its six delocalized π electrons, so the stable aromatic ring is kept. Addition would use up π electrons and destroy the aromatic ring, losing that stability; so substitution is the easier path.
Marking scheme
- The π electrons are delocalized round the ring, giving extra (aromatic) stability.
- Substitution keeps the aromatic ring, whereas addition would destroy it, so substitution is favored.
In a refinery, catalytic reforming turns straight-chain hydrocarbons of naphtha into aromatic compounds such as benzene and toluene, which are blended into petrol. Why does this improve the petrol?
Answer
Aromatic compounds have very high octane numbers (toluene's is over 100); they resist igniting by themselves under compression, so adding them raises the petrol's octane number and reduces knocking in the engine. Straight-chain alkanes knock easily.
Marking scheme
- Aromatics have high octane numbers, so the petrol knocks less (straight chains knock easily).
Your score
0 / 75
48 questions not marked yet
| Physical Chemistry | – | Full marks 28 |
| Inorganic Chemistry | – | Full marks 20 |
| Organic Chemistry | – | Full marks 18 |
| Applied Chemistry | – | Full marks 9 |
Marks lost, by unit
Mark a question to see your score here.
Found a mistake? Please tell us.
