Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
32 questions
Unit 9 · Organic Compounds
Printable PDFs
- The unit as a book (A5) 32 pages Answers as an A4 booklet, 8 sheets
- Study notes 2 pages
- Worksheet 5 pages Answer key
- Harder practice questions 2 pages Answer key
2. Give reasons
Benzene is an unsaturated compound, yet it doesn’t decolorize bromine water.
Hint
What would addition of bromine do to benzene’s ring of π electrons?
Answer
Benzene’s six π electrons are delocalized evenly round its flat ring, which makes the ring unusually stable (by about 150 kJ/mol). Addition of bromine would break up this ring of π electrons and lose that stability, so benzene doesn’t add bromine as an alkene does, and the bromine water keeps its color. Benzene instead reacts by substitution (with bromine and an iron(III) bromide catalyst), which keeps the aromatic ring.
Cyclohexane is alicyclic, while benzene is aromatic.
Hint
Check Hückel’s conditions for each ring.
Answer
Cyclohexane, C₆H₁₂, has only single bonds: it has no π electrons, and its ring is puckered, not flat, so it can’t be aromatic; its ring behaves like an alkane’s (an aliphatic cyclic compound, alicyclic). Benzene, C₆H₆, is flat, every ring carbon is in a double bond (completely conjugated), and it has 6 π electrons, 4n + 2 with n = 1: it obeys Hückel’s rule, so it is aromatic.
Butane and 2-methylpropane are isomers, but they have different boiling points.
Hint
Same formula; what is different, and how does it affect how the molecules touch?
Answer
Both are C₄H₁₀, so they are isomers, but their atoms are joined differently: butane is an unbranched chain, 2-methylpropane a branched one. They are different compounds with different properties. The branched molecule is more compact, so it has less surface in contact with its neighbors and they attract each other more weakly; less energy is needed to separate them, and it boils lower (−12 °C against −0.5 °C).
Alkanes undergo substitution reactions, but not addition reactions.
Hint
What does an addition reaction need in the molecule?
Answer
Addition happens at a double or triple bond: the π bond opens and the new atoms add to its carbons. Alkanes are saturated: every carbon already has four single bonds and no π bond to open. So an alkane can react only by having one of its atoms (a hydrogen) replaced by another, which is substitution, as in CH₄ + Cl₂ → CH₃Cl + HCl.
Aldehydes don’t show position isomerism of the functional group.
Hint
Where on the chain must the –CHO group always be?
Answer
The –CHO group contains a carbon that has a hydrogen and a double bond to oxygen, so it can only be at the end of a chain: its carbon is always carbon 1. The group can’t move to another position without becoming a different group (a C=O inside the chain is a ketone). So aldehydes have chain isomers (butanal and 2-methylpropanal) but no position isomers of the –CHO group.
Chlorination of methane is carried out in diffused sunlight, not in the dark or in bright sunlight.
Hint
What does light do to chlorine, and what happens if the reaction is too fast?
Answer
Light gives chlorine molecules the energy to split into atoms, which start the reaction: in the dark, methane and chlorine don’t react. In bright direct sunlight the reaction can run out of control, even explosively, giving carbon and hydrogen chloride (CH₄ + 2Cl₂ → C + 4HCl). Diffused sunlight starts the reaction and keeps it steady.
3. Differentiate between
Open-chain and closed-chain compounds
Hint
Compare the skeleton, another name for each, and an example of each.
Answer
| Open-chain compounds | Closed-chain compounds |
|---|---|
| Carbon atoms joined in chains, straight or branched, with no ring. | Some atoms joined in a ring. |
| Also called acyclic or aliphatic compounds. | Also called cyclic compounds. |
| Alkanes CₙH₂ₙ₊₂, alkenes CₙH₂ₙ, alkynes CₙH₂ₙ₋₂. | Cycloalkanes CₙH₂ₙ; aromatic rings such as C₆H₆. |
| Examples: butane, ethanol, ethanoic acid. | Examples: cyclohexane, benzene, pyridine. |
Alicyclic and aromatic compounds
Hint
Compare the ring’s shape, its π electrons, its stability and how it reacts.
Answer
| Alicyclic compounds | Aromatic compounds |
|---|---|
| Rings that behave like aliphatic (open-chain) compounds. | Rings with special stability, like benzene’s. |
| The ring is often puckered, not flat (cyclohexane). | The ring is flat. |
| No delocalized ring of π electrons (any double bonds stay separate). | Delocalized π electrons all round the ring, 4n + 2 of them (Hückel’s rule). |
| Saturated ones react by substitution; unsaturated ones (cyclohexene) by addition, like alkenes. | Resist addition; react by substitution, keeping the ring. |
| Examples: cyclopropane, cyclohexane, cyclohexene. | Examples: benzene, methylbenzene, naphthalene. |
Chain isomerism and position isomerism
Hint
What is different in each: the skeleton, or the place of the group?
Answer
| Chain isomerism | Position isomerism |
|---|---|
| The isomers have different carbon skeletons (a longer chain, or a shorter one with branches). | The isomers have the same carbon skeleton. |
| The functional group, if any, is the same. | The same functional group, double bond or substituent is in a different position. |
| Example: butane and 2-methylpropane (C₄H₁₀). | Example: propan-1-ol and propan-2-ol (C₃H₈O). |
Addition reaction and substitution reaction
Hint
Compare what happens, which compounds do it, and the number of products.
Answer
| Addition reaction | Substitution reaction |
|---|---|
| Two molecules join to form one product. | An atom or group in a molecule is replaced by another. |
| Shown by unsaturated compounds (alkenes, alkynes). | Shown by saturated compounds (alkanes) and others with a replaceable atom or group. |
| A double or triple bond becomes single (or double). | The bonds between carbons don’t change. |
| One product. | Two products. |
| Example: CH₂=CH₂ + Cl₂ → CH₂ClCH₂Cl. | Example: CH₄ + Cl₂ → CH₃Cl + HCl. |
Addition reaction and elimination reaction
Hint
One is the reverse of the other: think about what happens to the multiple bond.
Answer
| Addition reaction | Elimination reaction |
|---|---|
| Atoms are added to the two carbons of a multiple bond. | Atoms are removed from two neighboring carbons. |
| A double bond becomes single: the product is more saturated. | A single bond becomes double: the product is unsaturated. |
| Two reactants give one product. | One reactant gives two products (one a small molecule such as H₂O or HBr). |
| Example: CH₂=CH₂ + H₂ → CH₃CH₃ (Ni, heat). | Example: C₂H₅OH → CH₂=CH₂ + H₂O (conc. H₂SO₄, 170 °C). |
4. Answer the following questions
What are aliphatic compounds? Give two examples each of saturated and unsaturated aliphatic compounds.
Hint
Aliphatic means open chain; saturated means only single bonds between carbons.
Answer
Aliphatic (open-chain or acyclic) compounds are organic compounds whose carbon atoms are joined in straight or branched chains, not in rings. Saturated aliphatic compounds have only single bonds between carbon atoms: for example ethane, CH₃CH₃, and propane, CH₃CH₂CH₃. Unsaturated aliphatic compounds have at least one double or triple bond between carbon atoms: for example ethene, CH₂=CH₂, and ethyne, CH≡CH.
What are closed-chain compounds? How are they classified? Give an example of each kind.
Hint
Homocyclic (two kinds) and heterocyclic.
Answer
Closed-chain (cyclic) compounds are organic compounds in which atoms are joined in a ring. They are classified as:
- Homocyclic (carbocyclic): the ring is made of carbon atoms only. These are alicyclic compounds, rings that behave like aliphatic compounds, such as cyclohexane, C₆H₁₂, and aromatic compounds, flat rings with delocalized π electrons, such as benzene, C₆H₆.
- Heterocyclic: the ring contains at least one atom other than carbon, such as pyridine, C₅H₅N (a nitrogen in the ring).
State Hückel’s rule. Use it to show that benzene and naphthalene are aromatic.
Hint
State all the conditions, then count the π electrons and find n for each.
Answer
Hückel’s rule: a cyclic, planar molecule in which every ring atom takes part in a continuous ring of π electrons is aromatic if it contains (4n + 2) π electrons, where n = 0, 1, 2, 3…
Benzene, C₆H₆: a flat ring of six carbons, each in a double bond; 3 double bonds give 6 π electrons. 4n + 2 = 6 gives n = 1, a whole number: aromatic.
Naphthalene, C₁₀H₈: two flat fused rings, all ten carbons in double bonds; 5 double bonds give 10 π electrons. 4n + 2 = 10 gives n = 2, a whole number: aromatic.
Why is benzene drawn as a hexagon with a circle inside? What does the circle show?
Hint
Think about the two Kekulé structures and the measured bond lengths.
Answer
Kekulé’s structure draws benzene with three single and three double bonds, but there are two ways to place them, and neither matches the real molecule: all six C–C bonds are the same length, 139 pm, between a single (154 pm) and a double bond (134 pm). The six π electrons are not fixed in three bonds but delocalized evenly round the ring, above and below it. The circle inside the hexagon stands for these six delocalized π electrons, and the hexagon for the ring of six carbons, each with one hydrogen.
What is isomerism? Describe chain, position and functional isomerism with one example each.
Hint
Same molecular formula; then say what is different in each kind, with a named pair.
Answer
Isomerism is the existence of two or more compounds with the same molecular formula but different structural formulas, and so different properties; such compounds are isomers.
- Chain isomerism: the isomers have different carbon skeletons. Example: butane, CH₃CH₂CH₂CH₃, and 2-methylpropane, CH₃CH(CH₃)CH₃, both C₄H₁₀.
- Position isomerism: the same skeleton and the same functional group (or multiple bond), in different positions. Example: but-1-ene, CH₂=CHCH₂CH₃, and but-2-ene, CH₃CH=CHCH₃, both C₄H₈.
- Functional isomerism: the same molecular formula but different functional groups. Example: ethanol, CH₃CH₂OH (an alcohol), and methoxymethane, CH₃OCH₃ (an ether), both C₂H₆O.
How does ethanol react with concentrated sulphuric acid at 170 °C and at 140 °C? Name the kind of reaction in the first case.
Hint
Elimination from one molecule, or water removed between two molecules?
Answer
At 170 °C, with excess concentrated sulphuric acid, each ethanol molecule loses water from neighboring carbons and gives ethene: CH₃CH₂OH → CH₂=CH₂ + H₂O. This is an elimination reaction (dehydration).
At about 140 °C, with excess ethanol, one water molecule is removed between two ethanol molecules, giving ethoxyethane (diethyl ether): 2C₂H₅OH → C₂H₅OC₂H₅ + H₂O.
A hydrocarbon X, C₂H₄, decolorizes bromine water. X adds hydrogen in the presence of nickel to give Y. Y reacts with chlorine in diffused sunlight to give Z and hydrogen chloride. Identify X, Y and Z, write the equations, and name the kind of each reaction.
Hint
C₂H₄ that decolorizes bromine water has a C=C bond.
Answer
X is ethene, CH₂=CH₂ (it decolorizes bromine water, so it has a double bond).
CH₂=CH₂ + H₂ → CH₃CH₃ (Ni, heat): addition; Y is ethane.
CH₃CH₃ + Cl₂ → CH₃CH₂Cl + HCl (diffused sunlight): substitution; Z is chloroethane.
5. Write the structures and names
Write the condensed formulas and IUPAC names of all the isomers of C₅H₁₂, and name the kind of isomerism they show.
Hint
Five carbons in a chain, then four with one branch, then three with two branches.
Answer
Pentane, CH₃CH₂CH₂CH₂CH₃; 2-methylbutane, CH₃CH(CH₃)CH₂CH₃; 2,2-dimethylpropane, C(CH₃)₄ (or CH₃C(CH₃)₂CH₃). Three isomers, all chain isomers of each other.
Write the structures and IUPAC names of two position isomers of C₄H₈ that have an unbranched chain.
Hint
C₄H₈ is CₙH₂ₙ: put a C=C at different places in a four-carbon chain.
Answer
But-1-ene, CH₂=CH–CH₂–CH₃, and but-2-ene, CH₃–CH=CH–CH₃. The double bond is between carbons 1 and 2 in one and carbons 2 and 3 in the other.
Write a functional isomer of each, with its IUPAC name: a. ethanol, CH₃CH₂OH; b. propanone, CH₃COCH₃; c. propene, CH₂=CHCH₃.
Hint
Use the table of general formulas shared by two families.
Answer
- a.Methoxymethane, CH₃OCH₃ (an ether; both C₂H₆O).
- b.Propanal, CH₃CH₂CHO (an aldehyde; both C₃H₆O).
- c.Cyclopropane, a ring of three CH₂ groups (a cycloalkane; both C₃H₆).
Write the structures and IUPAC names of the four alcohols with the formula C₄H₁₀O. Pick out one pair of chain isomers and one pair of position isomers among them.
Hint
Two skeletons (a four-carbon chain and a branched three-carbon chain), and the –OH on each different carbon of each.
Answer
- Butan-1-ol, CH₃CH₂CH₂CH₂OH
- Butan-2-ol, CH₃CH₂CH(OH)CH₃
- 2-methylpropan-1-ol, (CH₃)₂CHCH₂OH
- 2-methylpropan-2-ol, (CH₃)₃COH
Chain isomers: butan-1-ol and 2-methylpropan-1-ol (both with the –OH on an end carbon, different skeletons). Position isomers: butan-1-ol and butan-2-ol (same chain, –OH on carbon 1 or 2); also 2-methylpropan-1-ol and 2-methylpropan-2-ol.
Draw the structure of cyclohexane and of benzene, and write the molecular formula of each.
Hint
Both are rings of six carbons; how many hydrogens does each carbon hold?
Answer
Cyclohexane, C₆H₁₂: a ring of six CH₂ groups joined by single bonds (drawn as a hexagon, each corner a CH₂). Benzene, C₆H₆: a flat ring of six CH groups with alternate single and double bonds in a Kekulé structure, or a hexagon with a circle inside (each corner a CH). See Figure 9.3 and Figure 9.4.
6. Complete the reactions
Complete and name the kind of each reaction:
- i.CH₂=CH₂ + Cl₂ →
- ii.CH≡CH + 2H₂ → (Ni)
- iii.CH₄ + Cl₂ → (diffused sunlight)
- iv.CH₃CH₂Br + KOH (aq) →
- v.CH₃CH₂Br + KOH (alc) →
- vi.CH₃CH₂OH → (conc. H₂SO₄, 170 °C)
Hint
Ask of each: does a multiple bond open (addition), is an atom swapped (substitution), or does a multiple bond form (elimination)?
Answer
- i.CH₂=CH₂ + Cl₂ → CH₂ClCH₂Cl (1,2-dichloroethane): addition.
- ii.CH≡CH + 2H₂ → CH₃CH₃ (ethane): addition.
- iii.CH₄ + Cl₂ → CH₃Cl + HCl (chloromethane): substitution.
- iv.CH₃CH₂Br + KOH (aq) → CH₃CH₂OH + KBr (ethanol): substitution.
- v.CH₃CH₂Br + KOH (alc) → CH₂=CH₂ + KBr + H₂O (ethene): elimination.
- vi.CH₃CH₂OH → CH₂=CH₂ + H₂O (ethene): elimination.
Propene, CH₂=CHCH₃, reacts with bromine. Write the equation, name the product and the kind of reaction, and say what you would see.
Hint
One bromine atom joins each carbon of the double bond.
Answer
CH₂=CHCH₃ + Br₂ → CH₂BrCHBrCH₃, 1,2-dibromopropane. It is an addition reaction: the red-brown color of the bromine disappears as it adds across the C=C bond.
7. Numerical problems
How many π electrons does the anthracene molecule, C₁₄H₁₀, have (seven double bonds in its Kekulé structure)? Find n in Hückel’s rule and say whether it is aromatic. It is flat.
Hint
Two π electrons per double bond; then solve 4n + 2 = (that number).
Answer
π electrons = 7 × 2 = 14. 4n + 2 = 14 gives 4n = 12, n = 3, a whole number. Anthracene is flat and completely conjugated, so it is aromatic.
The cycloheptatrienyl cation, C₇H₇⁺, is a flat ring of seven carbons with three double bonds; the seventh carbon carries the positive charge (an empty orbital). Count its π electrons and decide whether it is aromatic.
Hint
An empty orbital adds no electrons, but completes the ring.
Answer
π electrons = 3 × 2 + 0 = 6. Every ring carbon takes part (the charged carbon’s empty orbital completes the ring), the ring is flat, and 4n + 2 = 6 gives n = 1: aromatic.
A cycloalkane has a molecular mass of 84. Find its molecular formula and name it. (C = 12, H = 1)
Hint
CₙH₂ₙ has a mass of 12n + 2n = 14n.
Answer
14n = 84, so n = 6: C₆H₁₂, cyclohexane. Check: 6 × 12 + 12 × 1 = 84.
What mass of hydrogen is needed to change 14 g of ethene into ethane? (C = 12, H = 1)
Hint
CH₂=CH₂ + H₂ → CH₃CH₃: one mole of each.
Answer
Molar mass of C₂H₄ = 28 g/mol, so 14 g is 0.5 mol. It needs 0.5 mol of H₂, and H₂ is 2 g/mol: 0.5 × 2 = 1 g of hydrogen.
When 8 g of methane reacts with chlorine in diffused sunlight to give chloromethane only, what mass of chloromethane and what volume of hydrogen chloride at STP form? (C = 12, H = 1, Cl = 35.5; 1 mole of gas at STP = 22.4 L)
Hint
CH₄ + Cl₂ → CH₃Cl + HCl: one mole of methane gives one mole of each product.
Answer
Molar mass of CH₄ = 16 g/mol, so 8 g is 0.5 mol.
CH₃Cl = 12 + 3 + 35.5 = 50.5 g/mol: 0.5 × 50.5 = 25.25 g of chloromethane.
HCl: 0.5 mol, which at STP is 0.5 × 22.4 = 11.2 L.
Adding hydrogen to one mole of cyclohexene gives out about 120 kJ, and to one mole of benzene about 208 kJ. Estimate how much more stable benzene is than a ring of three separate double bonds would be.
Hint
Three separate double bonds would give out three times as much as one.
Answer
Three separate double bonds: 3 × 120 = 360 kJ/mol. Benzene gives out only 208 kJ/mol, so it is more stable by about 360 − 208 = 152 kJ/mol (about 150 kJ/mol, its resonance energy), because its π electrons are delocalized round the ring.
An alkyne has a molecular mass of 40. Find its formula, draw its structure and name it. How many σ and π bonds does it contain? (C = 12, H = 1)
Hint
CₙH₂ₙ₋₂ has a mass of 14n − 2. Count every bond: each single bond is σ; a triple bond is one σ and two π.
Answer
14n − 2 = 40, so n = 3: C₃H₄, propyne, CH≡C–CH₃.
Bonds: the C≡C is 1 σ + 2 π; the C–C single bond is 1 σ; the four C–H bonds are 4 σ. Total 6 σ and 2 π bonds.
