Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
20 questions
Unit 10 · Metallurgy
Printable PDFs
- The unit as a book (A5) 22 pages Answers as an A4 booklet, 6 sheets
- Study notes 2 pages
- Worksheet 5 pages Answer key
- Harder practice questions 3 pages Answer key
2. Give reasons
All ores are minerals, but all minerals are not ores.
Hint
What extra condition must a mineral meet to be called an ore?
Answer
An ore is a mineral from which a metal can be extracted easily and profitably. Every ore is therefore a mineral, but many minerals contain a metal that can’t be got out cheaply. Clay, for example, is a mineral containing aluminium, but extracting aluminium from it costs too much, so it is not an ore; bauxite is.
The ore of iron is calcined before it is put in the blast furnace.
Hint
Think of water, carbonates, FeO, and impurities like sulphur and arsenic.
Answer
Calcination drives off water (2Fe₂O₃·3H₂O → 2Fe₂O₃ + 3H₂O) and carbon dioxide from carbonates, burns off impurities such as sulphur and arsenic as gases (S + O₂ → SO₂), and turns FeO into Fe₂O₃ (4FeO + O₂ → 2Fe₂O₃), so that iron is not lost by joining the sand to form slag (FeO + SiO₂ → FeSiO₃). It also makes the ore porous, so the reducing gas gets into it easily.
Limestone is added to the charge of a blast furnace.
Hint
What is the gangue made of, and how is it removed?
Answer
Limestone is the flux. In the furnace it breaks down into lime, CaCO₃ → CaO + CO₂, and the lime (a basic oxide) joins the silica of the gangue (an acidic oxide) to form slag: CaO + SiO₂ → CaSiO₃. The molten slag floats on the iron and is run off, so the gangue is removed.
Coke is used in the blast furnace.
Hint
Coke has two jobs.
Answer
Coke is the fuel: it burns in the hot air, C + O₂ → CO₂, giving the heat that keeps the furnace at up to 1,500 °C. It also makes the reducing agent: the carbon dioxide reacts with more hot coke to give carbon monoxide, CO₂ + C → 2CO, which reduces the iron ore, Fe₂O₃ + 3CO → 2Fe + 3CO₂.
Aluminium seems not to react with dilute hydrochloric acid at first, though it is above hydrogen in the reactivity series.
Hint
What forms on aluminium as soon as it meets air?
Answer
Aluminium is always covered with a thin, tough layer of aluminium oxide, which keeps the acid away from the metal. Once the acid has dissolved this layer, the aluminium reacts quickly: 2Al + 6HCl → 2AlCl₃ + 3H₂.
Nitric acid does not give hydrogen with most metals.
Hint
Nitric acid is more than an acid.
Answer
Nitric acid is a strong oxidizing agent. Its nitrate (nitrogen in the +5 state) takes the metal’s electrons more readily than its hydrogen ions, so the nitrogen is reduced to an oxide of nitrogen (NO₂, NO, N₂O) or to ammonium nitrate, and any hydrogen ends up in water, not as hydrogen gas.
Gold dissolves in aqua regia but not in nitric acid alone.
Hint
What does each acid of the mixture do?
Answer
Nitric acid alone can oxidize only a trace of gold, and the gold ions take their electrons back, so the reaction stops at once. In aqua regia, the chloride from the hydrochloric acid grabs each gold ion as the very stable AuCl₄⁻ (as chloroauric acid, HAuCl₄), so gold ions are removed as fast as they form and the gold keeps dissolving: Au + HNO₃ + 4HCl → HAuCl₄ + NO + 2H₂O. (In the older picture, the mixture gives nascent chlorine, which turns gold into AuCl₃.)
3. Differentiate between
Roasting and calcination
Hint
Compare the air supply and the kind of ore each is for.
Answer
| Roasting | Calcination |
|---|---|
| The ore is heated strongly in plenty of air. | The ore is heated strongly with little or no air. |
| Used for sulphide ores. | Used for carbonate and hydrated ores. |
| Sulphur is removed as SO₂: 2ZnS + 3O₂ → 2ZnO + 2SO₂. | Carbon dioxide or water is removed: ZnCO₃ → ZnO + CO₂. |
Cast iron and steel
Hint
Carbon content, properties, uses.
Answer
| Cast iron | Steel |
|---|---|
| 2–4.5% carbon. | Up to about 2% carbon (usually 0.1–1.5%). |
| Hard but brittle: breaks when hammered. | Hard, strong and tough: can be rolled, hammered and welded. |
| Hard to weld; can’t be forged. | Can be welded and forged. |
| Used for stoves, pipes, manhole covers. | Used for building rods, vehicles, tools, utensils. |
Action of dilute sulphuric acid and dilute nitric acid on copper
Hint
Does copper react, and what is formed?
Answer
| Dilute sulphuric acid | Dilute nitric acid |
|---|---|
| No reaction: copper is below hydrogen and sulphuric acid is not oxidizing when dilute. | Copper dissolves: nitric acid is an oxidizing agent. |
| No gas. | Nitric oxide is given off, which turns brown in air. |
| The solution stays colorless. | The solution turns blue (copper nitrate): 3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O. |
4. Answer the following questions
What is metallurgy? Describe its main steps briefly.
Hint
Five steps, each with what it does and how.
Answer
Metallurgy is the process of extracting a metal from its ore and purifying it. Its main steps are:
- Crushing and grinding: the ore is broken and powdered in crushers and ball mills.
- Concentration: the gangue is removed by gravity separation, magnetic separation or froth flotation.
- Roasting (sulphide ores, in air) or calcination (carbonate and hydrated ores, with little air): the ore becomes the metal’s oxide.
- Reduction: the oxide is reduced to metal by carbon or carbon monoxide (smelting) or, for very reactive metals, by electrolysis.
- Refining: the metal is purified, by distillation or electro-refining.
Draw a labeled diagram of a blast furnace showing its zones.
Hint
Cup and cone at the top, gas outlet, four zones with temperatures, tuyeres, slag hole above the tap hole, hearth.
Answer
A tall tower lined with fire bricks, narrow at the top, widening downward and narrowing again to the hearth (as in Figure 10.2). Label: charge (ore, coke, limestone) entering through the cup and cone at the top; waste gases leaving near the top; from the top down, the zone of reduction (400–700 °C), zone of slag formation (700–1,000 °C), zone of fusion (1,200–1,300 °C) and zone of combustion (1,300–1,500 °C); tuyeres blowing in the hot air; molten slag floating on molten iron in the hearth, with the slag hole above and the tap hole for iron at the bottom.
Describe the reactions that take place in the different zones of a blast furnace, with equations.
Hint
Four zones, bottom to top, each with its equations.
Answer
- Zone of combustion (1,300–1,500 °C): coke burns in the hot air, giving heat: C + O₂ → CO₂.
- Zone of fusion (1,200–1,300 °C): carbon dioxide meets hot coke and is reduced to carbon monoxide, CO₂ + C → 2CO, taking in heat. Spongy iron and slag melt; iron dissolves carbon (3Fe + C → Fe₃C); leftover oxide is reduced by carbon, Fe₂O₃ + 3C → 2Fe + 3CO.
- Zone of slag formation (700–1,000 °C): limestone decomposes, CaCO₃ → CaO + CO₂, and lime joins silica to form slag, CaO + SiO₂ → CaSiO₃.
- Zone of reduction (400–700 °C): carbon monoxide reduces the ore to spongy iron: Fe₂O₃ + 3CO → 2Fe + 3CO₂.
Molten iron (pig iron) collects in the hearth under the slag, and each is tapped off.
Write the physical properties and two uses each of iron, copper, aluminium, silver and gold.
Hint
Color, density, melting point, conductivity, malleability; then what each is best for.
Answer
- Iron: silvery gray, density 7.87 g/cm³, melts at 1,538 °C, conducts fairly well, malleable and ductile, magnetic. Uses: steel for buildings, bridges and vehicles; cores of electromagnets.
- Copper: reddish brown, 8.93 g/cm³, melts at 1,085 °C, the second-best conductor, very ductile. Uses: electric wires; water pipes, pots and alloys (brass, bronze).
- Aluminium: silvery white, light (2.70 g/cm³), melts at 660 °C, good conductor, protected by its oxide layer. Uses: utensils and foil; aircraft bodies and overhead power lines.
- Silver: shining white, 10.5 g/cm³, melts at 962 °C, the best conductor of heat and electricity and best reflector. Uses: jewelry and coins; mirrors and electrical contacts.
- Gold: yellow, very dense (19.3 g/cm³), melts at 1,064 °C, the most malleable and ductile metal, never tarnishes. Uses: jewelry and gold reserves; electrical contacts and dentistry.
How do copper, silver and iron react with dilute nitric acid? Write the equations. Why are brown fumes seen at the mouth of the test tube?
Hint
Nitric acid is an oxidizing agent; iron in cold, very dilute acid gives ammonium nitrate.
Answer
3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O (blue solution).
3Ag + 4HNO₃ → 3AgNO₃ + NO + 2H₂O (colorless solution).
Iron, with cold, very dilute acid: 4Fe + 10HNO₃ → 4Fe(NO₃)₂ + NH₄NO₃ + 3H₂O; with somewhat stronger dilute acid: Fe + 4HNO₃ → Fe(NO₃)₃ + NO + 2H₂O.
The nitric oxide given off is colorless, but at the mouth of the tube it meets air and is oxidized to brown nitrogen dioxide: 2NO + O₂ → 2NO₂.
What is aqua regia? How does it react with gold?
Hint
The mixture, its ratio, the equations, and the product’s name.
Answer
Aqua regia is a mixture of three parts of concentrated hydrochloric acid and one part of concentrated nitric acid, by volume. The acids react to give nitrosyl chloride and chlorine: HNO₃ + 3HCl → NOCl + 2H₂O + 2[Cl]. The chlorine turns gold into gold(III) chloride, Au + 3[Cl] → AuCl₃, which dissolves in hydrochloric acid as chloroauric acid: AuCl₃ + HCl → HAuCl₄. Overall: Au + HNO₃ + 4HCl → HAuCl₄ + NO + 2H₂O. The gold dissolves as a yellow solution, because the chloride ions hold the gold ions as AuCl₄⁻ as soon as the nitric acid forms them.
5. Numerical problems
5.6 g of iron filings are added to excess dilute hydrochloric acid. (i) What mass of hydrogen is given off? (ii) What volume does it occupy at STP? (Fe = 56, H = 1)
Hint
Fe + 2HCl → FeCl₂ + H₂: one mole of hydrogen for each mole of iron.
Answer
Moles of iron = 5.6 ÷ 56 = 0.1 mol, so 0.1 mol of H₂ is formed.
- i.Mass of H₂ = 0.1 × 2 = 0.2 g.
- ii.Volume at STP = 0.1 × 22.4 = 2.24 L.
Which gives more hydrogen at STP with excess dilute sulphuric acid: 2.7 g of aluminium or 5.6 g of iron? Show your working. (Al = 27, Fe = 56)
Hint
2 Al give 3 H₂; 1 Fe gives 1 H₂.
Answer
Aluminium: 2Al + 3H₂SO₄ → Al₂(SO₄)₃ + 3H₂. Moles of Al = 2.7 ÷ 27 = 0.1 mol, giving 0.1 × 3/2 = 0.15 mol H₂ = 0.15 × 22.4 = 3.36 L.
Iron: Fe + H₂SO₄ → FeSO₄ + H₂. Moles of Fe = 5.6 ÷ 56 = 0.1 mol, giving 0.1 mol H₂ = 2.24 L.
The aluminium gives more: 3.36 L against 2.24 L, though it has less than half the mass, because each aluminium atom gives three electrons and each iron atom only two.
19.05 g of copper dissolves completely in dilute nitric acid. What volume of nitric oxide is formed at STP? (Cu = 63.5)
Hint
3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O: 3 moles of copper give 2 moles of NO.
Answer
Moles of Cu = 19.05 ÷ 63.5 = 0.3 mol.
Moles of NO = 0.3 × 2/3 = 0.2 mol.
Volume = 0.2 × 22.4 = 4.48 L at STP.
A gold bangle has a mass of 23.3 g and a volume of 1.30 cm³. Is it pure gold? (density of pure gold 19.3 g/cm³)
Hint
Work out its density and compare.
Answer
It is not pure gold: its density, 17.9 g/cm³, is less than gold’s 19.3 g/cm³, so it is mixed with a lighter metal such as copper or silver (as all gold jewelry is, to make it hard enough to wear). A volume found by dipping the bangle in water, as Archimedes did, is the jeweler’s simplest test.
