Clothes and bags · 9 of 58
Sew a button back on
Expert guidance
What you need
A button, needle, doubled knotted thread, and chalk or a pencil.
Do this
- Do up the shirt without the button. Mark the cloth through the buttonhole.
- Come up from the back at the mark, and pull until the knot catches.
- Go up through one hole and down through the hole opposite, then back through the cloth beside where you began.
- Repeat for the other two holes, then go round each pair again until the button is firm.
- Finish at the back. Pass the needle under the stitches there, leave a small loop, go through it and pull tight. Do this twice.
- Clip the thread and tug the button.
Why this way
Marking through the buttonhole keeps the shirt straight, and the double thread and firm knot make a button last. Expert guidance.
Do it today
Check your school shirts. Tighten or replace any loose button before it falls off. Fifteen minutes.
For example
Bishal’s uniform shirt lost a button on the bus. He found one of the same size on the spare label strip inside the shirt and sewed it on before dinner.
Where these facts come from
- Sew a Button, iFixit.
- Five Ways to Fix, Patch, and Mend Your Favorite Clothes, iFixit.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
