Skip to content

← Fix It, in Practice

Clothes and bags · 10 of 58

Give a coat or trouser button a thread stem

Expert guidance

What you need

A button, needle and doubled thread.

Do this

  1. Start on the front at the marked spot, so the button will hide the knot.
  2. Sew through one diagonal pair of holes two or three times, but don’t pull tight. Leave a gap under the button.
  3. Do the same with the other pair, making an X.
  4. Bring the needle up between the button and the cloth, not through the button.
  5. Wrap the thread round the loose stitches three or four times to make a stem.
  6. Take the needle to the back, make a small stitch, and knot it. Clip the thread.

Why this way

The stem lifts the button so the thick cloth around the buttonhole fits under it. It should be about as tall as that cloth is thick. A tight button strains and pulls off. Expert guidance.

Do it today

Find a jacket or trousers with a button sewn flat and tight. Try this on it. Twenty minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix