Skip to content

← Home Skills, in Practice

Kitchen · 40 of 109

Clear the holes in a gas burner

Not tested on its own

Do this

  1. Turn off the regulator. Let the burner go cold.
  2. Lift off the pan stand, burner cap and ring.
  3. Soak them in hot soapy water, then scrub with an old toothbrush.
  4. Clear any blocked hole with a pin. Don’t make the hole bigger.
  5. Dry them completely. Put them back exactly as they were.
  6. Turn on and light. The flame should be even all round.

Why this way

Blocked holes give a weak, uneven flame. Queensland’s gas safety page says a flame that isn’t steady can mean a fault: if a clean burner still burns badly, call a gas technician. These cleaning steps are ordinary know-how. Not tested on its own.

Do it today

Look at the flame tonight. Is it even all round? One minute.

Where these facts come from

General information. Read the labels on cleaning products, and never mix them. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 109 things to do