Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
12 questions
Unit 10 · Inorganic Materials
Printable PDFs
- The unit as a book (A5) 22 pages Answers as an A4 booklet, 6 sheets
- Study notes 3 pages
- Worksheet 5 pages Answer key
- Harder practice questions 2 pages Answer key
2. Give reasons
Dry chlorine doesn’t bleach a dry flower, but moist chlorine does.
Hint
Which acid does chlorine form, and what does it need to form it?
Answer
Chlorine bleaches through hypochlorous acid, which it forms only with water: Cl₂ + H₂O ⇌ HCl + HOCl. Hypochlorous acid gives nascent oxygen, HOCl → HCl + [O], which oxidizes the colored matter into colorless matter. Dry chlorine forms no hypochlorous acid, so it can’t bleach.
Sulphur powder is sprinkled over mercury spilled from a broken thermometer.
Hint
What does mercury form with sulphur, and why is that safer than mercury droplets?
Answer
Mercury reacts with sulphur even at room temperature to form mercury sulphide: Hg + S → HgS. Mercury droplets give off poisonous vapor; mercury sulphide is a solid that doesn’t, so it can be swept up safely.
Alloys are used more than pure metals in daily life.
Hint
Compare hardness, rusting and melting point.
Answer
Pure metals are often too soft (gold, aluminium), rust easily (iron) or melt at an unsuitable temperature. Mixing in a little of another element makes an alloy harder and stronger (the different-sized atoms stop the rows sliding), often resistant to corrosion (stainless steel), and gives it the melting point, color, resistance or magnetism a job needs (solder, brass, nichrome, alnico).
3. Differentiate between
Acidic oxide and basic oxide
Hint
Which kind of element makes each? What does each give with water, and what does it react with?
Answer
| Acidic oxide | Basic oxide |
|---|---|
| Usually the oxide of a non-metal. | The oxide of a metal. |
| Dissolves in water to give an acid, which turns blue litmus red. | If it dissolves, gives an alkali, which turns red litmus blue. |
| Reacts with bases to give a salt and water. | Reacts with acids to give a salt and water. |
| Examples: CO₂, SO₂, P₂O₅. | Examples: Na₂O, CaO, MgO. |
Substitutional alloy and interstitial alloy
Hint
Where do the added atoms go, and how big are they compared with the main metal’s?
Answer
| Substitutional alloy | Interstitial alloy |
|---|---|
| The added atoms take the places of some of the main metal’s atoms. | The added atoms fit into the gaps between the main metal’s atoms. |
| The added atoms are about the same size as the main metal’s. | The added atoms are much smaller (C, N, H). |
| Example: brass (Zn in Cu), bronze (Sn in Cu). | Example: steel (C in Fe). |
4. Answer the following questions
Write the balanced equations for the reactions of chlorine with (i) hydrogen, (ii) iron, (iii) cold dilute sodium hydroxide, (iv) slaked lime, (v) potassium iodide.
Hint
Chlorides with hydrogen and iron (which valency does chlorine give iron?), hypochlorite with the cold alkali, bleaching powder with slaked lime, and a displacement with the iodide.
Answer
- i.H₂ + Cl₂ → 2HCl (in sunlight)
- ii.2Fe + 3Cl₂ → 2FeCl₃
- iii.Cl₂ + 2NaOH → NaCl + NaOCl + H₂O
- iv.Ca(OH)₂ + Cl₂ → CaOCl₂ + H₂O
- v.Cl₂ + 2KI → 2KCl + I₂
How does dilute hydrochloric acid react with (i) zinc, (ii) sodium carbonate, (iii) copper oxide, (iv) silver nitrate? Write balanced equations and what you would see.
Hint
A gas that pops, a gas that turns lime water milky, a color change, a white precipitate.
Answer
- i.Zn + 2HCl → ZnCl₂ + H₂: fizzing; the gas burns with a pop.
- ii.Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂: brisk fizzing; the gas turns lime water milky.
- iii.CuO + 2HCl → CuCl₂ + H₂O: the black powder dissolves, giving a blue-green solution.
- iv.AgNO₃ + HCl → AgCl + HNO₃: a white precipitate, which darkens in sunlight.
Complete and balance, and name each product: (i) Zn + S →, (ii) Na + H₂O →, (iii) CaO + H₂O →, (iv) NaCl + H₂SO₄ (conc., warm) →, (v) NH₄Cl + NaOH (warm) →, (vi) NaCl + H₂O (brine, electrolyzed) →.
Hint
A sulphide; an alkali and a gas; slaked lime; a gas that fumes in moist air; a gas that turns damp red litmus blue; the three products of the chlor-alkali industry.
Answer
- i.Zn + S → ZnS (zinc sulphide).
- ii.2Na + 2H₂O → 2NaOH + H₂ (sodium hydroxide and hydrogen).
- iii.CaO + H₂O → Ca(OH)₂ (calcium hydroxide, slaked lime).
- iv.NaCl + H₂SO₄ → NaHSO₄ + HCl (sodium hydrogen sulphate and hydrogen chloride gas).
- v.NH₄Cl + NaOH → NaCl + NH₃ + H₂O (sodium chloride, ammonia and water).
- vi.2NaCl + 2H₂O → 2NaOH + H₂ + Cl₂ (sodium hydroxide, left in the solution; hydrogen at the cathode; chlorine at the anode).
What is an alloy? Write the composition and one use each of brass, bronze, stainless steel, solder and duralumin. What is an amalgam? Give one example.
Hint
Think of what each is used for at home and in a workshop. Every amalgam has one liquid metal in it.
Answer
An alloy is a homogeneous mixture of a metal with one or more other metals or a non-metal, made by melting them together.
- Brass: copper and zinc; gagri, taps, screws.
- Bronze: copper and tin; statues, bells, medals.
- Stainless steel: iron with chromium (and nickel); kitchen utensils, surgical instruments.
- Solder: tin and lead (or tin with a little silver and copper); joining wires.
- Duralumin: aluminium with copper, magnesium and manganese; aircraft bodies.
An amalgam is an alloy of mercury with another metal: dental amalgam (mercury with silver, tin and copper) fills teeth.
5. Numerical problems
A gold necklace of 18 carats has a mass of 35 g. Find the mass of pure gold in it.
Hint
18 carats means 18 parts of gold in 24.
Answer
About 26.3 g of gold (75%).
A craftsman in Lalitpur melts 3.9 kg of copper with 1.1 kg of tin to cast a bell. What is the percentage of copper in the alloy? Is it ordinary bronze or bell metal?
Hint
Percentage of copper = mass of copper ÷ total mass × 100. Bell metal is about 78% copper.
Answer
Total mass = 3.9 + 1.1 = 5.0 kg.
78% copper and 22% tin: bell metal, the bronze with extra tin that rings well, just right for a bell.
Think: Riya adds 0.5 g of marble powder to 40 mL of dilute hydrochloric acid, and Nabin adds 0.5 g of marble chips to another 40 mL of the same acid. Riya’s fizzing stops within a minute; Nabin’s goes on for many minutes. Nabin says, “My chips must give more carbon dioxide, since they fizz for longer.” Is he right? Explain.
Hint
The same mass of the same marble, with the acid in excess. Does the shape of the marble change how much CaCO₃ there is to react?
Answer
No. Both have 0.5 g of calcium carbonate and plenty of acid, so both give the same volume of carbon dioxide in the end (CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂). The powder has a much larger surface area, so more acid particles hit it each second and its gas comes out much faster; the chips give the same gas more slowly, over a longer time. A longer fizz means a slower reaction, not more product.
