Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
24 questions
Unit 8 · Electrolysis
Printable PDFs
- The unit as a book (A5) 28 pages Answers as an A4 booklet, 7 sheets
- Study notes 2 pages
- Worksheet 5 pages Answer key
- Harder practice questions 3 pages Answer key
2. Give reasons
Solid sodium chloride doesn’t conduct electricity, but its solution in water does.
Hint
Both contain Na⁺ and Cl⁻ ions. What is the difference between the ions in the two?
Answer
In solid sodium chloride the Na⁺ and Cl⁻ ions are held in fixed places in the crystal and can only vibrate, so they can’t carry a current. When it dissolves in water (or melts), the ions are free to move: with a current, Na⁺ moves to the cathode and Cl⁻ to the anode, so the solution conducts.
Sugar solution doesn’t conduct electricity.
Hint
What does sugar become when it dissolves?
Answer
Sugar is a covalent compound. It dissolves in water as whole, uncharged molecules and doesn’t split into ions. With no ions to move, there is nothing to carry a current through the solution, so sugar is a non-electrolyte.
Ethanoic acid is called a weak electrolyte, though it dissolves completely in water.
Hint
Weak or strong is about ionizing, not dissolving.
Answer
Whether an electrolyte is strong or weak depends on how much of it splits into ions, not on how much dissolves. Ethanoic acid mixes with water in any amount, but only a small fraction of its molecules ionize (about 1.3% at 0.1 mol/L): CH₃COOH ⇌ CH₃COO⁻ + H⁺. With few ions in the solution, it conducts poorly, so it is a weak electrolyte.
A little dilute sulphuric acid is added to water before it is electrolyzed.
Hint
How well does pure water conduct? Is the acid used up?
Answer
Pure water is a very weak electrolyte: only about 2 molecules in a billion are ionized, so it hardly conducts and its electrolysis would be extremely slow. Sulphuric acid is a strong electrolyte; a little of it provides plenty of ions to carry the current. The sulphate ions are not discharged, so only the water is decomposed, into hydrogen and oxygen, and the acid is not used up.
In electroplating, the object to be plated is made the cathode.
Hint
Where are the metal ions turned back into metal?
Answer
The metal ions in the electrolyte are positive (Cu²⁺, Ag⁺, Ni²⁺), so they move to the cathode, where they take electrons and are deposited as metal atoms, for example Ag⁺ + e⁻ → Ag. So the object must be the cathode for the coat to form on it. At the anode, the metal would dissolve instead.
The blue color of copper sulphate solution fades when it is electrolyzed with carbon electrodes, but not with copper electrodes.
Hint
The blue color is the color of one kind of ion. In each cell, is that ion replaced?
Answer
The blue color is due to Cu²⁺ ions. With carbon electrodes, Cu²⁺ ions are deposited as copper on the cathode and nothing replaces them (oxygen comes off the anode), so the solution gets paler. With copper electrodes, the copper anode dissolves, Cu → Cu²⁺ + 2e⁻, putting back Cu²⁺ ions as fast as they are deposited at the cathode, so the color stays the same.
3. Differentiate between
Electrolytes and non-electrolytes
Hint
Compare: conduction when molten or dissolved, ions, decomposition, kind of compound, examples.
Answer
| Electrolyte | Non-electrolyte |
|---|---|
| Conducts electricity when molten or in solution. | Doesn’t conduct, molten or in solution. |
| Forms ions. | Stays as uncharged molecules. |
| Is decomposed by the current. | Is not decomposed. |
| Acids, bases and salts. | Mostly covalent compounds. |
| Examples: NaCl, CuSO₄, HCl. | Examples: sugar, glucose, alcohol. |
Strong electrolytes and weak electrolytes
Hint
Compare: how much ionizes, what the solution holds, conduction, the arrow in the equation, examples.
Answer
| Strong electrolyte | Weak electrolyte |
|---|---|
| Ionizes almost completely in solution. | Ionizes only partly. |
| Its solution has many ions and hardly any whole molecules. | Its solution has a few ions among many molecules. |
| Conducts well. | Conducts poorly. |
| One arrow: NaCl → Na⁺ + Cl⁻. | Double arrow: CH₃COOH ⇌ CH₃COO⁻ + H⁺. |
| Examples: HCl, NaOH, NaCl, NH₄Cl. | Examples: CH₃COOH, H₂CO₃, NH₄OH. |
Metallic conduction and electrolytic conduction
Hint
What carries the charge in each? Is the conductor changed?
Answer
| Metallic conduction | Electrolytic conduction |
|---|---|
| Carried by free electrons. | Carried by positive and negative ions. |
| The conductor is not changed chemically. | The electrolyte is decomposed. |
| No matter moves through the conductor. | Ions travel through the liquid. |
| Happens in metals and graphite. | Happens in molten ionic compounds and solutions of electrolytes. |
| Resistance rises when heated. | Resistance falls when heated. |
Electroplating and electrorefining
Hint
What is each for, and what are its anode and its cathode?
Answer
| Electroplating | Electrorefining |
|---|---|
| Coats an object with a thin layer of another metal. | Purifies an impure metal. |
| The object is the cathode. | A thin sheet of pure metal is the cathode. |
| A pure plate of the coating metal is the anode. | The impure metal is the anode. |
| For protection or decoration. | For metal 99.99% pure. |
| Example: chromium plating a bicycle handlebar. | Example: refining copper. |
4. Answer the following questions
What is an electrolyte? Write two examples each of strong and weak electrolytes.
Hint
The definition has three parts: when it conducts, what carries the current, what happens to it.
Answer
An electrolyte is a substance that conducts electricity in the molten state or in solution, by means of ions, and is decomposed by the current. Strong electrolytes: sodium chloride, hydrochloric acid (also NaOH, NH₄Cl, CuSO₄). Weak electrolytes: ethanoic acid, ammonia solution (also carbonic acid).
What is meant by the degree of ionization? Write three factors that affect it.
Hint
It is a fraction. Think about what kind of electrolyte, how much water, how hot.
Answer
The degree of ionization is the fraction of the total number of molecules of an electrolyte dissolved that is split into ions: number of molecules ionized ÷ total number of molecules dissolved. It depends on:
- 1.the nature of the electrolyte (strong electrolytes nearly 100%, weak ones a few percent);
- 2.the concentration (a more dilute solution is more ionized);
- 3.the temperature (it increases a little with temperature for most weak electrolytes).
Write the main postulates of Arrhenius theory of electrolytic dissociation.
Hint
There are about eight: what happens on dissolving, charge, movement, reversibility, degree, current, discharge, properties.
Answer
- On dissolving in water or melting, an electrolyte splits into positive ions (cations) and negative ions (anions), without any current.
- The total positive charge equals the total negative charge, so the solution is electrically neutral.
- The ions move freely and at random through the solution.
- Ionization is reversible: ions join back into molecules while molecules split, AB ⇌ A⁺ + B⁻.
- The degree of ionization depends on the nature of the electrolyte, its concentration and the temperature; strong electrolytes are almost completely ionized, weak ones only partly.
- When a current is passed, cations move to the cathode and anions to the anode.
- At the electrodes, the ions are discharged: cations gain electrons at the cathode and anions lose electrons at the anode, forming the products of electrolysis.
- The properties of the solution of an electrolyte are the properties of its ions.
Write two limitations of Arrhenius theory.
Hint
What is solid sodium chloride made of? Are strong electrolytes partly or fully ionized?
Answer
- 1.It says electrolytes form ions on dissolving, but ionic compounds such as NaCl are made of ions even in the solid state; dissolving only sets the ions free.
- 2.It says strong electrolytes are not fully ionized at higher concentrations, but they are completely ionized at every concentration; their conductivity falls because the crowded ions attract each other.
(Also: the ions are surrounded by water molecules, and H⁺ exists as H₃O⁺.)
With a labeled diagram, describe the electrolysis of water. Write the reactions at the cathode and the anode, and how you would test the two gases.
Hint
Hofmann’s voltameter, water with a little acid, platinum electrodes. Which gas over which electrode, in what ratio?
Answer
Draw Hofmann’s voltameter as in Figure 8.2: two graduated side tubes with taps, joined to a middle tube with a reservoir, a platinum electrode at the foot of each, joined to a battery. It is filled with water containing a little dilute sulphuric acid, which provides ions to carry the current. When the current flows, H⁺ ions move to the cathode and OH⁻ ions to the anode:
Cathode: 4H⁺ + 4e⁻ → 2H₂. Anode: 4OH⁻ → 2H₂O + O₂ + 4e⁻. Overall: 2H₂O → 2H₂ + O₂.
Hydrogen collects over the cathode and oxygen over the anode, 2 volumes to 1. Tests: hydrogen burns with a pop when a lighted splint is brought to it; oxygen relights a glowing splint.
What is electroplating? Describe, with a labeled diagram, how an iron spoon is electroplated with copper.
Hint
What is the cathode, what the anode, what the electrolyte? Write the two half-equations.
Answer
Electroplating is coating a metal object with a thin layer of another metal by electrolysis. Draw as in Figure 8.3. The clean iron spoon is made the cathode (joined to −), a copper plate the anode (joined to +), and both hang in copper sulphate solution. A small, steady direct current is passed. Cu²⁺ ions move to the spoon and are deposited as copper: Cu²⁺ + 2e⁻ → Cu. The copper anode dissolves to replace them: Cu → Cu²⁺ + 2e⁻. The spoon gets an even coat of copper and the solution stays blue.
How is impure copper purified by electrolysis? What happens to the impurities?
Hint
Which slab is the anode, which the cathode? Split the impurities into more reactive and less reactive than copper.
Answer
In electrorefining, a thick slab of impure copper is the anode, a thin sheet of pure copper the cathode, and copper sulphate solution with some sulphuric acid the electrolyte. With the current, copper from the anode dissolves, Cu → Cu²⁺ + 2e⁻, and pure copper is deposited on the cathode, Cu²⁺ + 2e⁻ → Cu. More reactive impurities (iron, zinc, nickel) dissolve but stay in the solution; less reactive ones (gold, silver) don’t dissolve and fall below the anode as anode mud. The cathode copper is 99.99% pure.
What is electrotyping? Write its steps and two uses.
Hint
A mold, made to conduct, used as which electrode?
Answer
Electrotyping is making an exact metal copy of an object, such as a printing block, coin or medal, by depositing metal on a mold of it by electrolysis. Steps:
- 1.a mold of the object is made in wax;
- 2.its face is coated with graphite to make it conduct;
- 3.it is made the cathode in copper sulphate solution, with a copper anode, and copper is deposited on it;
- 4.the copper shell is removed and backed with a cheaper metal.
Uses: making printing plates for books and newspapers; making copies of coins, medals and museum objects (and, as electroforming, the masters that press CDs).
5. Numerical problems
In a solution, 0.1 mol of a weak acid is dissolved and 0.0042 mol of it is split into ions. Find its degree of ionization as a percentage.
Hint
amount ionized ÷ amount dissolved. Multiply by 100 for a percentage.
Answer
4.2%. (Ethanoic acid is ionized this much at 0.01 mol/L: here, 0.1 mol of it made up to 10 liters.)
Ethanoic acid of 0.1 mol/L is 1.3% ionized. How many molecules in every 10,000 dissolved are split into ions, and how many ions do they make?
Hint
1.3% of 10,000. Each molecule that ionizes gives two ions.
Answer
130 molecules are ionized, giving 260 ions (130 CH₃COO⁻ and 130 H⁺). The other 9,870 stay whole.
Lochan electrolyses acidified water in a Hofmann’s voltameter. After 20 minutes the cathode’s tube holds 24 cm³ of gas. (i) Which gas is it? (ii) What volume of gas is in the anode’s tube? (iii) What is the total volume of gas collected?
Hint
Hydrogen comes off at the cathode, oxygen at the anode, 2 : 1.
Answer
- i.Hydrogen (H⁺ ions are discharged at the cathode).
- ii.Oxygen is half the volume of hydrogen: 12 cm³.
- iii. 36 cm³.
In electrolyzing water, Yangchen collects 45 cm³ of hydrogen and oxygen together. How much of each did she collect?
Hint
The gases are in the ratio 2 : 1, so the total is 3 parts.
Answer
One part is cm³. Hydrogen is 2 parts, 30 cm³; oxygen 1 part, 15 cm³.
A current of 0.2 A is passed through copper sulphate solution for 25 minutes. (i) How much charge flows? (ii) How many electrons is that? (iii) How many copper atoms are deposited on the cathode? (The charge on an electron is 1.6 × 10⁻¹⁹ C.)
Hint
Q = It, with t in seconds. Number of electrons = Q ÷ the charge on one electron. Each Cu²⁺ ion needs two electrons.
Answer
- i. s, so 300 C.
- ii.
- iii.Cu²⁺ + 2e⁻ → Cu, so the number of copper atoms is half the number of electrons: 9.4 × 10²⁰ atoms (about 0.1 g of copper).
Water is one-ninth hydrogen by mass (2 g of hydrogen in every 18 g of water). The hydrogen station at Dhulikhel makes about 2 kg of hydrogen a day. What is the least mass of water it must split each day? About how many liters is that? (1 liter of water has a mass of 1 kg.)
Hint
Hydrogen is 2/18 of the water, so the water is 9 times the hydrogen.
Answer
18 kg, about 18 liters of water a day. A real station uses a little more (about 10 L per kg of hydrogen, so about 20 L), since some water is lost and the water must be purified first.
