Skip to content

← Grade 12 Physics Model Papers

Grade 12 Physics Model Paper 3

Full marks: 75Time: 3 hours

Answer every question; where a question has an OR question, answer either one.

A full practice run of the NEB Grade 12 Physics paper (Phy. 102): 75 marks in 3 hours, 12 questions in three groups. Group A is one question of 11 multiple-choice items, about 25 minutes; groups B and C have short- and long-answer questions of two to four parts, with each part's marks shown. Questions 3 and 9 in group B and Questions 10 and 11 in group C each have an OR question: answer either the question or its OR question, every part from the same one, and mark only the one you answered. Write on paper first, then tap your choice in group A and open each other part's answer to give yourself the marks its scheme allows. Where needed, take g=9.8 g = 9.8 m/s², h=6.62×10−34 h = 6.62 \times 10^{-34} J s, c=3×108 c = 3 \times 10^8 m/s, e=1.6×10−19 e = 1.6 \times 10^{-19} C, the mass of an electron me=9.1×10−31 m_e = 9.1 \times 10^{-31} kg and μ0=4π×10−7 \mu_0 = 4\pi \times 10^{-7} T m/A.

A practice paper by Science Playground, made to CDC’s Specification Grid 2078, Grade 12 Physics (Phy. 102). Not an official CDC or NEB paper; the real NEB Grade 12 exam may differ.

Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.

Paper to print (PDF, 5 pages) Answer key and marking scheme

Group AMultiple choice11 marks

Question 1

11 × 1 = 11

Choose the correct option for each of the following questions.

a.

Which of these is true of the acceleration of a body in simple harmonic motion?

Pick an answer to see why.

b.

Honey poured from a jar on a cold winter morning flows much more slowly than on a warm afternoon. Why?

Pick an answer to see why.

c.

What is the moment of inertia of a uniform disc of mass 2.0 kg and radius 0.10 m about the axis through its center, at right angles to its face?

Pick an answer to see why.

d.

A gas is heated in a closed steel cylinder whose volume cannot change. Where does all the heat given to it go?

Pick an answer to see why.

e.

1,000 J of heat is given slowly to a large tank of water kept at 27 °C. What is the change in the water's entropy?

Pick an answer to see why.

f.

Newton's corpuscular theory and Huygens' wave theory both explained refraction. Which prediction decided between them?

Pick an answer to see why.

g.

Lhakpa looks at the blue sky through a polaroid and turns it slowly. The sky gets brighter and darker, but never goes dark. What does this show about the light from the sky?

Pick an answer to see why.

h.

A current passes through a copper–iron couple, heating one junction and cooling the other. What happens when the current is reversed?

Pick an answer to see why.

i.

An iron nail held by a magnet is heated red-hot, past 770 °C. It falls off. Why?

Pick an answer to see why.

j.

The current in a coil of self-inductance 0.20 H falls steadily from 4.0 A to zero in 0.10 s. What e.m.f. is induced in the coil?

Pick an answer to see why.

k.

What is the SI unit of the activity of a radioactive sample?

Pick an answer to see why.

Group BShort answers, each on one content area40 marks

Question 2

5 marks

Water flows smoothly along a horizontal pipe that narrows from a wide section to a narrow one.

a.
[1]

State Bernoulli's principle.

Answer

For an ideal fluid (incompressible and non-viscous) in steady flow, the sum of the pressure, the kinetic energy per unit volume and the potential energy per unit volume is the same at every point along a streamline: P+12ρv2+ρgh= P + \tfrac12\rho v^2 + \rho gh = constant.

Marking scheme
  • P+12ρv2+ρgh P + \tfrac12\rho v^2 + \rho gh is constant along a streamline (steady flow of an ideal fluid).
b.
[2]

Explain why the pressure is lower in the narrow section of the pipe.

Answer

By the equation of continuity, A1v1=A2v2 A_1v_1 = A_2v_2 : the same volume must pass every section each second, so the water moves faster where the pipe is narrow.

The pipe is horizontal, so ρgh \rho gh is the same at both places, and by Bernoulli's equation P+12ρv2 P + \tfrac12\rho v^2 stays constant. Where 12ρv2 \tfrac12\rho v^2 is larger, P must be smaller: the pressure falls in the narrow section.

Marking scheme
  • Continuity: the water moves faster in the narrow section.
  • With the height the same, P+12ρv2 P + \tfrac12\rho v^2 is constant, so higher speed means lower pressure.
c.
[2]

Two boats moving fast side by side, close together on a river, are found to be pulled towards each other. Roshan says it is because the water between them is pushed out and the boats move into the gap. Is he right? Explain.

Answer

No. The water is not pushed out of the gap: the boats are pushed together by a difference of pressure, as Bernoulli's principle says. The water passing through the narrow channel between the boats moves faster (relative to them) than the water on their outer sides. Faster-moving water is at lower pressure, so the pressure on each boat's inner side is less than on its outer side, and the net force pushes the boats towards each other. This is why boats are told to keep apart when passing.

Marking scheme
  • The water between the boats flows faster, so its pressure is lower (Bernoulli).
  • The greater pressure on the outer sides pushes the boats together; not because they move into a gap.

Question 3

5 marks

A solid disc and a solid sphere, each of mass 2.0 kg and radius 0.20 m, roll without slipping along a level floor at 3.0 m/s.

a.
[1]

Define the radius of gyration of a body.

Answer

The radius of gyration K of a body about an axis is the distance from the axis at which the whole mass of the body could be put without changing its moment of inertia: I=MK2 I = MK^2 , so K=I/M K = \sqrt{I/M} .

Marking scheme
  • The distance from the axis at which the whole mass gives the same moment of inertia, I=MK2 I = MK^2 .
b.
[2]

Calculate the total kinetic energy of the rolling disc.

Answer

Rolling without slipping, v=Rω v = R\omega , and the disc has I=12MR2 I = \tfrac12MR^2 , so
K=12Mv2+12Iω2=12Mv2+12(12MR2)v2R2=12Mv2(1+12) K = \tfrac12Mv^2 + \tfrac12I\omega^2 = \tfrac12Mv^2 + \tfrac12\left(\tfrac12MR^2\right)\frac{v^2}{R^2} = \tfrac12Mv^2\left(1 + \tfrac12\right)
K=12×2.0×3.02×1.5=9.0×1.5=13.5 J K = \tfrac12 \times 2.0 \times 3.0^2 \times 1.5 = 9.0 \times 1.5 = \mathbf{13.5 \text{ J}}

Marking scheme
  • K=12Mv2+12Iω2 K = \tfrac12Mv^2 + \tfrac12I\omega^2 with I=12MR2 I = \tfrac12MR^2 , ω=v/R \omega = v/R .
  • K = 13.5 J.
c.
[2]

Sagar says the sphere and the disc have the same kinetic energy, because they have the same mass and speed. Is he right? Justify your answer.

Answer

No. Their translational energies are equal, 12Mv2=9.0 \tfrac12Mv^2 = 9.0 J each, but their rotational energies are not. The sphere has I=25MR2 I = \tfrac25MR^2 , less than the disc's 12MR2 \tfrac12MR^2 , because more of its mass is near the axis:
Ksphere=12Mv2(1+25)=9.0×1.4=12.6 J K_{\text{sphere}} = \tfrac12Mv^2\left(1 + \tfrac25\right) = 9.0 \times 1.4 = 12.6 \text{ J}
The disc has more kinetic energy, 13.5 J against 12.6 J.

Marking scheme
  • Same translational KE, but the sphere's moment of inertia (25MR2 \tfrac25MR^2 ) is smaller than the disc's (12MR2 \tfrac12MR^2 ), so its rotational KE is smaller.
  • Sphere 12.6 J against disc 13.5 J, so he is not right.

OR

A small mass hung on a light spring stretches it by 4.9 cm. The mass is then pulled down a little and let go.

a.
[1]

What is meant by damped oscillation?

Answer

A damped oscillation is one whose amplitude decreases with time, because its energy is lost to friction or the resistance of the surrounding air or liquid.

Marking scheme
  • An oscillation whose amplitude decreases with time as energy is lost to resistive forces.
b.
[2]

Calculate the period of its oscillation.

Answer

At rest the spring's pull balances the weight: ke=mg ke = mg , so mk=eg \dfrac{m}{k} = \dfrac{e}{g} . Then
T=2πmk=2πeg=2π0.0499.8=2π×0.0707=0.44 s T = 2\pi\sqrt{\frac{m}{k}} = 2\pi\sqrt{\frac{e}{g}} = 2\pi\sqrt{\frac{0.049}{9.8}} = 2\pi \times 0.0707 = \mathbf{0.44 \text{ s}}

Marking scheme
  • ke=mg ke = mg , so m/k=e/g m/k = e/g .
  • T = 2π√(e/g) = 0.44 s.
c.
[2]

Sneha says that on the Moon, where g is a sixth of the Earth's, the same mass and spring would oscillate with a longer period. Is she right? Justify your answer.

Answer

No. The period of a mass on a spring is T=2πm/k T = 2\pi\sqrt{m/k} , which has no g in it: the mass and the spring's stiffness are the same on the Moon, so the period is the same, 0.44 s.

On the Moon the spring stretches only a sixth as much (e=mg/k e = mg/k ), and 2πe/g 2\pi\sqrt{e/g} gives the same answer, since e and g fall together. (A pendulum's period would be longer on the Moon; a spring's is not.)

Marking scheme
  • No: T=2πm/k T = 2\pi\sqrt{m/k} does not depend on g.
  • The extension falls with g, so e/g, and the period, are unchanged.

Question 4

5 marks

Air in a cylinder at 27 °C is compressed suddenly to half its volume. Take γ = 1.4 for air.

a.
[1]

What is an adiabatic process?

Answer

An adiabatic process is a thermodynamic process in which no heat enters or leaves the system (Q=0 Q = 0 ): it happens in a perfectly insulated container, or so quickly that heat has no time to flow.

Marking scheme
  • A process with no heat exchanged with the surroundings, Q = 0.
b.
[2]

Explain why, on a P–V diagram, an adiabatic curve is steeper than an isothermal curve through the same point.

Answer

For an isothermal change PV= PV = constant, so its slope is dPdV=−PV \dfrac{dP}{dV} = -\dfrac{P}{V} . For an adiabatic change PVγ= PV^\gamma = constant, so dPdV=−γPV \dfrac{dP}{dV} = -\gamma\dfrac{P}{V} .

Since γ > 1, the adiabatic slope is γ times the isothermal one. Physically, in an adiabatic compression the gas also heats up, so its pressure rises both because it is squeezed and because it gets hotter, faster than at a constant temperature.

Marking scheme
  • Isothermal slope −P/V; adiabatic slope −γP/V.
  • γ > 1, so the adiabatic is steeper (the gas also heats up when compressed).
c.
[1]

Calculate the temperature of the air after the compression.

Answer

T1V1γ−1=T2V2γ−1⇒T2=T1(V1V2)γ−1=300×20.4=300×1.32=396 K (123 °C) T_1V_1^{\gamma-1} = T_2V_2^{\gamma-1} \quad\Rightarrow\quad T_2 = T_1\left(\frac{V_1}{V_2}\right)^{\gamma-1} = 300 \times 2^{0.4} = 300 \times 1.32 = \mathbf{396 \text{ K}} \text{ (123 °C)}

Marking scheme
  • T2=T1(V1/V2)γ−1=396 T_2 = T_1(V_1/V_2)^{\gamma-1} = 396 K (123 °C).
d.
[1]

The same air, starting from the same state, can expand to twice its volume either isothermally or adiabatically. In which case does it do more work? Give a reason.

Answer

Isothermally. In the adiabatic expansion the gas cools as it does work, so its pressure falls faster (the steeper curve). Under the isothermal curve, which stays higher, the area, the work done, is larger.

Marking scheme
  • Isothermal: its pressure stays higher (the adiabatic gas cools), so the area under its curve is larger.

Question 5

5 marks

In a Young's double-slit experiment, the slits are 0.50 mm apart and the screen is 1.0 m from them. Light of wavelength 600 nm is used.

a.
[1]

What are coherent sources?

Answer

Coherent sources are sources of light that give out waves of the same frequency (wavelength) with a constant phase difference between them.

Marking scheme
  • Same frequency and a constant phase difference.
b.
[2]

Calculate the fringe width, and the distance of the third bright fringe from the central bright fringe.

Answer

β=λDd=600×10−9×1.00.50×10−3=1.2×10−3 m=1.2 mm \beta = \frac{\lambda D}{d} = \frac{600 \times 10^{-9} \times 1.0}{0.50 \times 10^{-3}} = 1.2 \times 10^{-3} \text{ m} = \mathbf{1.2 \text{ mm}}
The third bright fringe is at y3=3β= y_3 = 3\beta = 3.6 mm from the center.

Marking scheme
  • β = λD/d = 1.2 mm.
  • y₃ = 3β = 3.6 mm.
c.
[2]

Shreya covers one slit with black paper. She expects the same fringes, only half as bright. Is she right? Explain.

Answer

No: the fringes disappear. Interference needs light from two coherent sources overlapping on the screen, adding where the waves are in phase and canceling where they are out of phase. With one slit covered there is only one source, so there is nothing to interfere with, and the dark fringes are gone.

A dark fringe was a place where the waves from the two slits arrived half a wavelength out of step and canceled. One wave cannot cancel itself, so nothing on the screen goes dark any more: there are no bright and dark bands of width 1.2 mm, only a broad, fairly even patch of light from the one slit.

Marking scheme
  • No: interference needs two coherent sources, so with one slit the fringes disappear.
  • The dark fringes were where two waves canceled; one wave alone cannot cancel, so only a broad patch of light is left.

Question 6

5 marks

Prakriti wants to make a magnetic field meter from a thin strip of copper 0.10 mm thick, carrying a current of 5.0 A at right angles to a magnetic field of 1.0 T. Copper has 8.5×1028 8.5 \times 10^{28} free electrons per m³.

a.
[1]

What is the Hall effect?

Answer

When a magnetic field is applied at right angles to a current-carrying conductor, a potential difference is set up across the conductor, at right angles to both the current and the field. This is the Hall effect, and the potential difference is the Hall voltage.

Marking scheme
  • A voltage across a current-carrying conductor in a magnetic field, at right angles to both current and field.
b.
[3]

Calculate the Hall voltage across her copper strip, and judge whether her plan is sensible. Suggest a better choice of material, with a reason.

Answer

VH=BInet=1.0×5.08.5×1028×1.6×10−19×1.0×10−4=5.01.36×106=3.7×10−6 V V_H = \frac{BI}{net} = \frac{1.0 \times 5.0}{8.5 \times 10^{28} \times 1.6 \times 10^{-19} \times 1.0 \times 10^{-4}} = \frac{5.0}{1.36 \times 10^6} = \mathbf{3.7 \times 10^{-6} \text{ V}}
Only about 4 μV, even with a large current in a strong field: far too small to measure easily against the noise, so her plan is not sensible.

She should use a thin slice of semiconductor. VH V_H is inversely proportional to n, and a semiconductor has far fewer carriers (about 10²² per m³ against copper's 10²⁹), so for the same current the carriers drift much faster and the Hall voltage is far larger, millivolts with a small current. Real Hall probes are made this way.

Marking scheme
  • Uses VH=BI/(net) V_H = BI/(net) with the given values.
  • VH=3.7×10−6 V_H = 3.7 \times 10^{-6} V.
  • Too small to be a useful meter; a semiconductor, with far fewer carriers (V_H ∝ 1/n), gives a much larger Hall voltage.
c.
[1]

If the copper strip were replaced by a strip of p-type semiconductor, carrying the same current in the same field, would the Hall voltage have the same sign? Give a reason.

Answer

No, it would be reversed. In a p-type semiconductor the current is carried by holes, which are positive, moving in the direction of the current. The magnetic force pushes them to the same face of the strip that the electrons in copper were pushed to, but they make that face positive instead of negative. (This is how the Hall effect tells the sign of the charge carriers.)

Marking scheme
  • No: positive holes are pushed to the same face as electrons would be, so that face becomes positive and the sign reverses.

Question 7

5 marks

Bishal compares the e.m.f.s of two cells with a potentiometer.

a.
[2]

State Kirchhoff's two laws.

Answer

Kirchhoff's first law (current law): the algebraic sum of the currents meeting at a junction is zero: the total current entering a junction equals the total current leaving it, ∑I=0 \sum I = 0 .

Kirchhoff's second law (voltage law): in any closed loop of a circuit, the algebraic sum of the e.m.f.s equals the algebraic sum of the products of current and resistance, ∑E=∑IR \sum E = \sum IR .

Marking scheme
  • First law: the sum of currents at a junction is zero (current in = current out).
  • Second law: round a closed loop, ΣE = ΣIR.
b.
[1]

Why does a potentiometer measure the e.m.f. of a cell more accurately than a voltmeter does?

Answer

At the balance point no current flows through the cell, so there is no drop across its internal resistance and the potentiometer measures its full e.m.f. A voltmeter always draws some current, so it reads the terminal p.d., a little less than the e.m.f.

Marking scheme
  • At balance the cell gives no current, so no drop across its internal resistance; a voltmeter draws current and reads less.
c.
[2]

Bishal slides the jockey along the whole wire, but the galvanometer deflects the same way everywhere and he finds no balance point. Suggest two possible reasons.

Answer

Any two of these:

  1. The e.m.f. of the cell being measured is greater than the p.d. across the whole wire: the driver cell is too weak, or too much resistance is in the rheostat.
  2. The positive terminal of the cell being measured is not joined to the same end of the wire as the driver cell's positive terminal, so the two p.d.s add instead of opposing.
  3. A loose connection or broken wire in the driver circuit, so no current flows through the wire.
Marking scheme
  • One correct reason (e.g. the cell's e.m.f. is more than the p.d. across the wire).
  • A second correct reason (e.g. the positive terminals not joined to the same end).

Question 8

5 marks

In a Thomson-type tube, electrons from a hot cathode are accelerated through 2,000 V and then pass between plates where an electric field and a magnetic field of 1.0 mT act at right angles to each other and to the beam. The beam goes straight through when the electric field is 2.65×104 2.65 \times 10^4 V/m.

a.
[3]

Calculate the speed of the electrons and their specific charge, e/m.

Answer

The beam is undeflected when the two forces balance, eE=evB eE = evB :
v=EB=2.65×1041.0×10−3=2.65×107 m/s v = \frac{E}{B} = \frac{2.65 \times 10^4}{1.0 \times 10^{-3}} = \mathbf{2.65 \times 10^7 \text{ m/s}}
The accelerating p.d. gave them this kinetic energy, eV=12mv2 eV = \tfrac12mv^2 , so
em=v22V=(2.65×107)22×2000=1.76×1011 C/kg \frac{e}{m} = \frac{v^2}{2V} = \frac{(2.65 \times 10^7)^2}{2 \times 2000} = \mathbf{1.76 \times 10^{11} \text{ C/kg}}

Marking scheme
  • v = E/B = 2.65 × 10⁷ m/s.
  • eV=12mv2 eV = \tfrac12mv^2 , so e/m = v²/2V (or E²/2VB²).
  • e/m = 1.76 × 10¹¹ C/kg.
b.
[2]

Thomson's experiment gave e/m for the electron, but not e or m separately. Explain how the mass of the electron was then found, and what so large a value of e/m told scientists.

Answer

Millikan's oil drop experiment measured the charge e (1.6×10−19 1.6 \times 10^{-19} C) on its own. Dividing it by e/m (1.76×1011 1.76 \times 10^{11} C/kg) gave the electron's mass, 9.1×10−31 9.1 \times 10^{-31} kg.

Even Thomson's rough measurements showed e/m about a thousand times larger than for a hydrogen ion, the lightest particle then known (today's values give about 1,800 times). With a charge of the same size, this meant the electron is far lighter than a hydrogen atom: a particle smaller than any atom, part of every atom.

Marking scheme
  • Millikan measured e; m = e ÷ (e/m) = 9.1 × 10⁻³¹ kg.
  • e/m far larger than a hydrogen ion's (about a thousand times, as Thomson found): the electron is a particle much lighter than any atom.

Question 9

5 marks

LIGO's two detectors, at Hanford and Livingston in the USA, are about 3,000 km apart. Each has two arms 4 km long at right angles.

a.
[3]

Write any three properties of gravitational waves.

Answer

Any three of these:

  1. They are ripples of space-time itself, predicted by Einstein in 1916 from his general theory of relativity.
  2. They travel at the speed of light.
  3. They are made by massive objects accelerating violently, such as black holes or neutron stars colliding, or a star exploding.
  4. A passing wave stretches space in one direction and squeezes it at right angles, back and forth.
  5. They need no medium and pass through matter almost unchanged.
  6. They are extremely weak by the time they reach the Earth.
Marking scheme
  • One correct property.
  • A second correct property.
  • A third correct property.
b.
[2]

What is the greatest time between a gravitational wave reaching the two detectors? A wave changes the length of each arm by one part in 10²¹: by how much does each arm change?

Answer

The wave travels at the speed of light, so the greatest gap (the wave arriving along the line joining them) is
t=3.0×1063×108=0.010 s=10 ms t = \frac{3.0 \times 10^6}{3 \times 10^8} = 0.010 \text{ s} = \mathbf{10 \text{ ms}}
Change of arm length: ΔL=10−21×4000=4×10−18 m \Delta L = 10^{-21} \times 4000 = \mathbf{4 \times 10^{-18} \text{ m}} , a few thousandths of the width of a proton.

Marking scheme
  • t = 3.0 × 10⁶ ÷ 3 × 10⁸ = 10 ms.
  • ΔL = 10⁻²¹ × 4,000 = 4 × 10⁻¹⁸ m.

OR

A Zener diode of breakdown voltage 5.0 V is joined in series with a 350 Ω resistor across a 12 V supply, to keep a 5.0 V output across a 500 Ω load connected across the Zener.

a.
[3]

Write any three differences between an ordinary junction diode and a Zener diode.

Answer
Junction diode Zener diode
Lightly doped, with a wide depletion layer Heavily doped, with a thin depletion layer
Used in forward bias, mostly as a rectifier Used in reverse bias, in the breakdown region
Damaged by the large current at breakdown Designed to work at breakdown without damage
Used to turn a.c. into d.c. Used to hold a voltage steady (voltage regulator)
Marking scheme
  • One correct difference.
  • A second correct difference.
  • A third correct difference.
b.
[2]

Calculate the current through the 350 Ω resistor and the current through the Zener diode.

Answer

The Zener holds 5.0 V across itself and the load, so the resistor has 12−5.0=7.0 12 - 5.0 = 7.0 V across it:
I=7.0350=0.020 A=20 mA I = \frac{7.0}{350} = 0.020 \text{ A} = \mathbf{20 \text{ mA}}
The load takes 5.0500=10 \dfrac{5.0}{500} = 10 mA, so the Zener carries 20−10= 20 - 10 = 10 mA.

Marking scheme
  • Current through the resistor = 7.0/350 = 20 mA.
  • Load 10 mA, so the Zener carries 10 mA.

Group CLong answers, each on one content area24 marks

Question 10

8 marks

Light of wavelength 500 nm falls on a single slit 0.20 mm wide, and the diffraction pattern is seen on a screen 2.0 m away.

a.
[2]

Calculate the angle of the first minimum and the width of the central bright band on the screen.

Answer

The first minimum is at asin⁡θ=λ a\sin\theta = \lambda :
sin⁡θ=500×10−90.20×10−3=2.5×10−3⇒θ=2.5×10−3 rad (0.14°) \sin\theta = \frac{500 \times 10^{-9}}{0.20 \times 10^{-3}} = 2.5 \times 10^{-3} \quad\Rightarrow\quad \theta = 2.5 \times 10^{-3} \text{ rad } (0.14°)
The central band runs from the first minimum on one side to the first on the other:
w=2λDa=2×500×10−9×2.00.20×10−3=1.0×10−2 m=10 mm w = \frac{2\lambda D}{a} = \frac{2 \times 500 \times 10^{-9} \times 2.0}{0.20 \times 10^{-3}} = 1.0 \times 10^{-2} \text{ m} = \mathbf{10 \text{ mm}}

Marking scheme
  • sin θ = λ/a = 2.5 × 10⁻³ (θ = 0.14°).
  • Central band width = 2λD/a = 10 mm.
b.
[2]

The pupil of Rakshya's eye is 3.0 mm across. For light of 550 nm, find the smallest angle her eye can resolve, and the farthest distance at which she can see a car's two headlights, 1.4 m apart, as two separate lights.

Answer

θ=1.22λD=1.22×550×10−93.0×10−3=2.2×10−4 rad \theta = \frac{1.22\lambda}{D} = \frac{1.22 \times 550 \times 10^{-9}}{3.0 \times 10^{-3}} = \mathbf{2.2 \times 10^{-4} \text{ rad}}
The lights are just resolved when they make this angle at her eye: θ=sx \theta = \dfrac{s}{x} , so
x=sθ=1.42.24×10−4=6.3×103 m (6.3 km) x = \frac{s}{\theta} = \frac{1.4}{2.24 \times 10^{-4}} = \mathbf{6.3 \times 10^3 \text{ m}} \ (6.3 \text{ km})

Marking scheme
  • θ = 1.22λ/D = 2.2 × 10⁻⁴ rad.
  • x = s/θ ≈ 6.3 km.
c.
[2]

Rakshya then narrows the slit, expecting the central band to get narrower. Is she right? Explain.

Answer

No: it gets wider. The first minimum is at sin⁡θ=λ/a \sin\theta = \lambda/a , so the smaller the slit width a, the larger the angle, and the wider the central band (w=2λD/a w = 2\lambda D/a ). Halving the slit doubles the band's width. Light is spread out more by a narrower opening; the band also gets dimmer, because less light passes.

Marking scheme
  • sin θ = λ/a: a smaller a gives a larger angle.
  • So the central band widens (w ∝ 1/a), though it gets dimmer.
d.
[2]

Explain why astronomers build telescopes with mirrors many meters across, and why a radio telescope, which receives radio waves about 21 cm long, must be far larger still.

Answer

Light from a star passing through a round aperture spreads into a disc, and two stars can be told apart only if their angle exceeds 1.22λ/D 1.22\lambda/D . A larger aperture D makes this angle smaller, so a mirror many meters across resolves finer detail (and also gathers more light, to see fainter objects).

Radio waves of 21 cm are about 400,000 times longer than light of 550 nm (0.21/550×10−9≈3.8×105 0.21 / 550 \times 10^{-9} \approx 3.8 \times 10^5 ), so for the same resolution D must be that many times larger: radio telescopes are dishes hundreds of meters wide, or many dishes linked across a continent to act as one.

Marking scheme
  • θ = 1.22λ/D: a larger D gives a smaller angle, so finer detail is resolved.
  • Radio wavelengths are far longer, so D must be far larger for the same resolution.

OR

Newton worked out the speed of sound in air from v=P/ρ v = \sqrt{P/\rho} . Take the pressure of the air as 1.01×105 1.01 \times 10^5 Pa, its density at 0 °C as 1.29 kg/m³, and γ = 1.4.

a.
[2]

Calculate the speed of sound at 0 °C by Newton's formula and by Laplace's corrected formula.

Answer

Newton (isothermal):
v=Pρ=1.01×1051.29=280 m/s v = \sqrt{\frac{P}{\rho}} = \sqrt{\frac{1.01 \times 10^5}{1.29}} = \mathbf{280 \text{ m/s}}
Laplace (adiabatic):
v=γPρ=1.4×280=331 m/s v = \sqrt{\frac{\gamma P}{\rho}} = \sqrt{1.4} \times 280 = \mathbf{331 \text{ m/s}}

Marking scheme
  • Newton: v = √(P/ρ) = 280 m/s.
  • Laplace: v = √(γP/ρ) = 331 m/s.
b.
[2]

Calculate the speed of sound on a day when the air is at 27 °C, and the change in speed for each degree Celsius near 0 °C.

Answer

v27=v0TT0=331300273=331×1.048=347 m/s v_{27} = v_0\sqrt{\frac{T}{T_0}} = 331\sqrt{\frac{300}{273}} = 331 \times 1.048 = \mathbf{347 \text{ m/s}}
The speed rises by 347−331=16 347 - 331 = 16 m/s over 27 °C, about 0.6 m/s for each degree Celsius.

Marking scheme
  • v = 331√(300/273) = 347 m/s.
  • About 0.6 m/s per °C.
c.
[2]

Explain why Newton's assumption that sound travels through air at a constant temperature was wrong.

Answer

In a sound wave the air is compressed and rarefied hundreds of times a second. A compression warms the air a little and a rarefaction cools it, and air is a poor conductor of heat, so in so short a time no heat can flow between them to even out the temperature.

The changes are therefore adiabatic, not isothermal: the compressed air is warmer and pushes back harder, which makes the effective elasticity γP instead of P, and the speed γ \sqrt{\gamma} times greater.

Marking scheme
  • The compressions and rarefactions are too fast, and air too poor a conductor, for heat to flow: the changes are adiabatic.
  • So the elasticity is γP, not P, and the speed is √γ times Newton's.
d.
[2]

Ankit says sound travels more slowly on a humid monsoon day than on a dry winter day at the same temperature, because the damp air is "heavier". Is he right? Justify your answer.

Answer

No, it travels slightly faster. A water molecule (18 g/mol) is lighter than the average molecule of dry air (29 g/mol), so at the same temperature and pressure moist air is less dense than dry air, not heavier. Since v=γP/ρ v = \sqrt{\gamma P/\rho} , a smaller density gives a higher speed.

Marking scheme
  • Water vapor is lighter than dry air (18 against 29 g/mol), so moist air is less dense.
  • v ∝ 1/√ρ, so sound is slightly faster in humid air: he is not right.

Question 11

8 marks

A coil of resistance 40 Ω and inductive reactance 30 Ω is connected to a 220 V (rms), 50 Hz supply.

a.
[2]

What is meant by the power factor of an a.c. circuit? Explain why it is 1 for a pure resistor and 0 for a pure inductor.

Answer

The power factor is cos⁡ϕ \cos\phi , where φ is the phase difference between the voltage and the current; the average power is P=VrmsIrmscos⁡ϕ P = V_{\text{rms}}I_{\text{rms}}\cos\phi , and cos⁡ϕ=R/Z \cos\phi = R/Z .

In a pure resistor the current is in phase with the voltage, φ = 0, so cos φ = 1 and all the power is used. In a pure inductor the current lags by 90°, cos 90° = 0: energy stored in the field in one quarter-cycle is given back in the next, so no power is used on average.

Marking scheme
  • Power factor = cos φ, in P=VrmsIrmscos⁡ϕ P = V_{\text{rms}}I_{\text{rms}}\cos\phi (= R/Z).
  • Resistor φ = 0, cos φ = 1; inductor φ = 90°, cos φ = 0, the energy stored and given back.
b.
[2]

Explain why a choke coil, rather than a resistor, is used to reduce the current in an a.c. circuit such as a fan's speed regulator.

Answer

Both a resistor and an inductor limit an a.c. current. But a resistor turns the energy it takes into heat, I2R I^2R , which is wasted. An inductor with very little resistance limits the current by its reactance, and the current through it is almost 90° out of phase with the voltage across it, so its power factor is nearly zero: it uses almost no power (a wattless current). So a choke saves energy and does not heat up.

Marking scheme
  • A resistor wastes power as heat (I²R).
  • A choke limits the current by its reactance with a power factor near 0, so it wastes almost no power.
c.
[2]

Calculate the impedance of the coil, the current, its power factor and the power it uses.

Answer

Z=R2+XL2=402+302=50 ΩI=VZ=22050=4.4 A Z = \sqrt{R^2 + X_L^2} = \sqrt{40^2 + 30^2} = \mathbf{50\ \Omega} \qquad I = \frac{V}{Z} = \frac{220}{50} = \mathbf{4.4 \text{ A}}
Power factor cos⁡ϕ=RZ=4050= \cos\phi = \dfrac{R}{Z} = \dfrac{40}{50} = 0.8, and
P=VIcos⁡ϕ=220×4.4×0.8=774 W(=I2R=4.42×40) P = VI\cos\phi = 220 \times 4.4 \times 0.8 = \mathbf{774 \text{ W}} \quad (= I^2R = 4.4^2 \times 40)

Marking scheme
  • Z = 50 Ω and I = 4.4 A.
  • cos φ = 0.8 and P = 774 W.
d.
[2]

Srijana says that adding a capacitor of the right size in series with the coil would increase the power drawn. Is she right? Justify your answer with a calculation.

Answer

Yes. A capacitor with XC=XL=30 Ω X_C = X_L = 30\ \Omega cancels the coil's reactance (series resonance): Z=R=40 Ω Z = R = 40\ \Omega , and the current is in phase with the voltage (power factor 1).
I=22040=5.5 AP=I2R=5.52×40=1210 W I = \frac{220}{40} = 5.5 \text{ A} \qquad P = I^2R = 5.5^2 \times 40 = 1210 \text{ W}
The power rises from 774 W to about 1,210 W. A capacitor itself uses no power; it only lets more current flow.

Marking scheme
  • With X_C = X_L, the circuit is at resonance: Z = R = 40 Ω, cos φ = 1.
  • I = 5.5 A, P = 1,210 W, more than 774 W: she is right.

OR

A flat circular coil of 100 turns and radius 5.0 cm carries a current of 0.50 A.

a.
[2]

State the Biot–Savart law, and use it to explain why the field at the center of a circular coil is proportional to the number of turns and to the current, and inversely proportional to the radius.

Answer

Biot–Savart law: the field dB due to a small element dl of a wire carrying current I, at a point at distance r, is dB=μ04πI dlsin⁡θr2 dB = \dfrac{\mu_0}{4\pi}\dfrac{I\,dl\sin\theta}{r^2} , where θ is the angle between dl and the line to the point.

At the center of a circular coil, every element is at the same distance r and at θ = 90°, and all their fields point the same way along the axis. Adding them over the circumference 2πr 2\pi r gives B=μ0I2r B = \dfrac{\mu_0 I}{2r} for one turn, and N turns add N times: B=μ0NI2r B = \dfrac{\mu_0NI}{2r} , proportional to N and I, and to 1/r.

Marking scheme
  • dB=μ04πI dlsin⁡θr2 dB = \dfrac{\mu_0}{4\pi}\dfrac{I\,dl\sin\theta}{r^2} .
  • At the center every element gives a field the same way at θ = 90°: summed, B=μ0NI/2r B = \mu_0NI/2r .
b.
[2]

Explain why the coil of a moving-coil galvanometer is placed in a radial magnetic field.

Answer

In a radial field (made by curved pole pieces and a soft iron core), the plane of the coil is always parallel to the field, whatever its deflection. The torque on the coil is then always NIAB NIAB , its greatest value, and does not depend on the angle.

At rest the magnetic torque is balanced by the spring's restoring torque kθ, so NIAB=kθ NIAB = k\theta and θ∝I \theta \propto I : the deflection is proportional to the current, and the scale is even (linear).

Marking scheme
  • In a radial field the coil's plane is always along the field, so the torque NIAB doesn't depend on the angle.
  • So θ ∝ I (NIAB = kθ), giving a linear scale.
c.
[2]

Calculate the magnetic field at the center of the coil.

Answer

B=μ0NI2r=4π×10−7×100×0.502×0.050=6.28×10−50.10=6.3×10−4 T B = \frac{\mu_0NI}{2r} = \frac{4\pi \times 10^{-7} \times 100 \times 0.50}{2 \times 0.050} = \frac{6.28 \times 10^{-5}}{0.10} = \mathbf{6.3 \times 10^{-4} \text{ T}}

Marking scheme
  • Uses B=μ0NI/2r B = \mu_0NI/2r with r = 0.050 m.
  • B = 6.3 × 10⁻⁴ T.
d.
[2]

To make a galvanometer more sensitive, Niraj rewinds its coil with twice as many turns of the same wire. Will its current sensitivity and its voltage sensitivity both double? Justify your answer.

Answer

Only the current sensitivity doubles. Current sensitivity is θI=NBAk \dfrac{\theta}{I} = \dfrac{NBA}{k} , so twice N gives twice the deflection per ampere.

Voltage sensitivity is θV=NBAkR \dfrac{\theta}{V} = \dfrac{NBA}{kR} . Twice as many turns of the same wire is twice the length, so R doubles too, and the voltage sensitivity stays about the same.

Marking scheme
  • Current sensitivity NBA/k doubles with N.
  • Voltage sensitivity NBA/(kR) is unchanged, since R doubles with the wire's length.

Question 12

8 marks

In an electron microscope, electrons are accelerated from rest through a potential difference, and behave as waves of a very short wavelength.

a.
[2]

State de Broglie's hypothesis, and explain why it was called a dual hypothesis.

Answer

De Broglie's hypothesis (1924): every moving particle has a wave linked with it, of wavelength λ=hp=hmv \lambda = \dfrac{h}{p} = \dfrac{h}{mv} , where p is its momentum.

Light was already known to behave both as a wave (interference, diffraction) and as particles, photons (the photoelectric effect). De Broglie proposed that matter is the same: particles such as electrons also behave as waves. So both radiation and matter have a dual nature, as waves and as particles.

Marking scheme
  • λ=h/mv \lambda = h/mv for every moving particle.
  • Dual: as light behaves as waves and particles, so does matter.
b.
[2]

Explain why the wave nature of electrons was confirmed by passing them through a crystal, and not through a ruled grating.

Answer

Diffraction is noticeable only when the spacing of the obstacles is about the same as the wavelength. An electron accelerated through about 100 V has a wavelength of about 1 Å (10⁻¹⁰ m), far smaller than the gap between the lines of any ruled grating.

The atoms of a crystal are regularly spaced about 1 Å apart, the right size, so a crystal acts as a natural grating. Electrons passed through or reflected from a crystal gave diffraction patterns, just as X-rays do, which proved they behave as waves.

Marking scheme
  • Diffraction needs spacing about the wavelength; electrons' λ (about 1 Å) is far too small for a ruled grating.
  • A crystal's atoms are about 1 Å apart, so it diffracts electrons, giving patterns like X-rays'.
c.
[2]

Calculate the de Broglie wavelength of an electron accelerated through 150 V.

Answer

eV=p22m eV = \dfrac{p^2}{2m} , so
p=2meV=2×9.1×10−31×1.6×10−19×150=6.61×10−24 kg m/s p = \sqrt{2meV} = \sqrt{2 \times 9.1 \times 10^{-31} \times 1.6 \times 10^{-19} \times 150} = 6.61 \times 10^{-24} \text{ kg m/s}
λ=hp=6.62×10−346.61×10−24=1.0×10−10 m (1.0 A˚) \lambda = \frac{h}{p} = \frac{6.62 \times 10^{-34}}{6.61 \times 10^{-24}} = \mathbf{1.0 \times 10^{-10} \text{ m}} \ (1.0 \text{ Å})

Marking scheme
  • p=2meV=6.61×10−24 p = \sqrt{2meV} = 6.61 \times 10^{-24} kg m/s.
  • λ = h/p = 1.0 × 10⁻¹⁰ m.
d.
[2]

If every moving body is a wave, why does a football of mass 0.45 kg kicked at 20 m/s never show diffraction when it passes through a goal? Justify your answer with a calculation.

Answer

λ=hmv=6.62×10−340.45×20=6.62×10−349.0=7.4×10−35 m \lambda = \frac{h}{mv} = \frac{6.62 \times 10^{-34}}{0.45 \times 20} = \frac{6.62 \times 10^{-34}}{9.0} = 7.4 \times 10^{-35} \text{ m}
Diffraction is seen only when the opening is about the size of the wavelength. This wavelength is far smaller than a goal, or even a proton (about 10⁻¹⁵ m), so the ball's wave nature can never be noticed: for everyday bodies, h is so small that they behave as particles only.

Marking scheme
  • λ = h/mv = 7.4 × 10⁻³⁵ m.
  • Far too small compared with any opening (even a nucleus), so no diffraction is ever seen.

Your score

0 / 75

46 questions not marked yet

Mechanics–Full marks 13
Heat and Thermodynamics–Full marks 7
Waves and Optics–Full marks 15
Electricity and Magnetism–Full marks 21
Modern Physics–Full marks 19

Marks lost, by unit

Mark a question to see your score here.

Found a mistake? Please tell us.

Score 0 of 0 0 of 46 marked Time left: 3:00:00