Skip to content

← Grade 12 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

6 questions

Unit 17 · Organometallic Compounds

Printable PDFs

B. Short answer questions

9.

How is a Grignard reagent prepared? Explain with an example. Can we prepare a Grignard reagent from ethane? Explain the process. Why can’t we use water instead of ether?

Answer

Preparation. A haloalkane is warmed with dry magnesium turnings in dry ether (ethoxyethane); magnesium inserts between the carbon and the halogen:

CHX3CHX2Br+Mg→dry etherCHX3CHX2MgBr \ce{CH3CH2Br + Mg ->[dry ether] CH3CH2MgBr}

Bromoethane gives ethylmagnesium bromide. On the metal’s surface, magnesium gives one electron to the C–X bond, which splits into R· and ·MgX, and these combine to RMgX.

From ethane. Not directly: ethane has no C–X bond for magnesium to insert into. First turn ethane into a haloalkane by free-radical chlorination in light, then make the Grignard reagent:

CHX3CHX3+ClX2→hνCHX3CHX2Cl+HCl \ce{CH3CH3 + Cl2 ->[h\nu] CH3CH2Cl + HCl}

CHX3CHX2Cl+Mg→dry etherCHX3CHX2MgCl \ce{CH3CH2Cl + Mg ->[dry ether] CH3CH2MgCl}

Why not water. The carbon bonded to magnesium is strongly δ− and basic. Water would protonate it at once, destroying the reagent: CH₃CH₂MgCl + H₂O → CH₃CH₃ + Mg(OH)Cl. Ether has no O–H hydrogen, and its oxygen lone pairs bond to the magnesium and hold the Grignard reagent in solution.

10.

Why is the given compound considered an organometallic compound? Write its name and use. In which respect does it have similarities with a Grignard reagent?

ClCCPtClClC=C stands atright angles tothe PtCl₃ planeH atoms: small gray balls−
Figure 17.20 The compound, drawn with its true shape.
Answer

It is the anion of Zeise’s salt, [PtCl₃(C₂H₄)]⁻ (as the salt, K[PtCl₃(C₂H₄)]·H₂O, potassium trichlorido(η²-ethene)platinate(II) monohydrate).

Why organometallic: the platinum atom is bonded directly to the two carbon atoms of ethene. A compound with at least one metal–carbon bond is organometallic.

Use: it was the first organometallic compound of a transition metal (1830), and it is still studied as the simplest metal–alkene complex, the model for how catalysts such as the Wacker (palladium) and Ziegler–Natta (titanium) catalysts hold alkenes while they react.

Similarity with a Grignard reagent: both have a metal–carbon bond, so both are organometallic compounds, and both have the metal in a positive oxidation state (Mg +2, Pt +2). Difference: a Grignard reagent has a polar σ bond from magnesium to one carbon, with the carbon δ−; Zeise’s salt has platinum bonded side-on to a C=C double bond, by σ donation from the alkene and π back-bonding from platinum.

11.

What are organometallic compounds? Give an example each of organolithium, organocadmium and organocopper compounds. Explain the nature of the bond formed in such compounds.

Answer

Organometallic compounds are compounds with at least one direct bond between a metal atom and a carbon atom.

  • Organolithium: methyllithium, CH₃Li (or n-butyllithium, C₄H₉Li).
  • Organocadmium: dimethylcadmium, (CH₃)₂Cd.
  • Organocopper: lithium dimethylcuprate, (CH₃)₂CuLi, a Gilman reagent.

The bond. It is a polar covalent σ bond: the carbon and the metal share a pair of electrons, but the metal is less electronegative (Li 0.98, Cd 1.69, Cu 1.90) than carbon (2.55), so the pair lies nearer the carbon, M^δ+^–C^δ−^. The bigger the difference, the more polar the bond: C–Li is the most polar and most reactive, C–Cd and C–Cu much less. Because the carbon is δ−, these compounds act as sources of carbanion-like R groups that attack δ+ carbons.

12.

What happens when:

  • a.a Grignard reagent is treated with water?
  • b.ethyl ethanoate is treated with methylmagnesium chloride?
  • c.methylmagnesium chloride is heated with ethanoyl chloride?
Answer

a. It is hydrolyzed to an alkane: RMgX+HX2O→RH+Mg(OH)X \ce{RMgX + H2O -> RH + Mg(OH)X} , for example CHX3MgCl+HX2O→CHX4+Mg(OH)Cl \ce{CH3MgCl + H2O -> CH4 + Mg(OH)Cl} .

b. Two molecules of the Grignard reagent add; acid hydrolysis gives the tertiary alcohol 2-methylpropan-2-ol and ethanol. The first gives propanone (ethoxide leaves), which takes the second at once:

CHX3COOCX2HX5+CHX3MgCl→CHX3COCHX3+CX2HX5OMgCl \ce{CH3COOC2H5 + CH3MgCl -> CH3COCH3 + C2H5OMgCl}

CHX3COCHX3+CHX3MgCl→(CHX3)X3COMgCl→HX2O/HX+(CHX3)X3COH+Mg(OH)Cl \ce{CH3COCH3 + CH3MgCl -> (CH3)3COMgCl ->[H2O/H+] (CH3)3COH + Mg(OH)Cl}

c. One molecule gives propanone, CHX3COCl+CHX3MgCl→CHX3COCHX3+MgClX2 \ce{CH3COCl + CH3MgCl -> CH3COCH3 + MgCl2} ; with more Grignard reagent the propanone goes on to (CH₃)₃COMgCl, and hydrolysis gives 2-methylpropan-2-ol.

13.

Starting from a Grignard reagent (CH₃MgBr), how would you prepare:

  • a.methane
  • b.ethyl alcohol
  • c.acetic acid
  • d.isopropyl alcohol
  • e.propanol
Answer

a. Methane: add water. CHX3MgBr+HX2O→CHX4+Mg(OH)Br \ce{CH3MgBr + H2O -> CH4 + Mg(OH)Br}

b. Ethanol: add methanal, then dilute acid. HCHO+CHX3MgBr→dry etherCHX3CHX2OMgBr→HX2O/HX+CHX3CHX2OH+Mg(OH)Br \ce{HCHO + CH3MgBr ->[dry ether] CH3CH2OMgBr ->[H2O/H+] CH3CH2OH + Mg(OH)Br}

c. Ethanoic (acetic) acid: pour onto dry ice, then dilute acid. CHX3MgBr+COX2→dry etherCHX3COOMgBr→HX2O/HX+CHX3COOH+Mg(OH)Br \ce{CH3MgBr + CO2 ->[dry ether] CH3COOMgBr ->[H2O/H+] CH3COOH + Mg(OH)Br}

d. Propan-2-ol (isopropyl alcohol): add ethanal, then dilute acid. CHX3CHO+CHX3MgBr→dry ether(CHX3)X2CHOMgBr→HX2O/HX+(CHX3)X2CHOH+Mg(OH)Br \ce{CH3CHO + CH3MgBr ->[dry ether] (CH3)2CHOMgBr ->[H2O/H+] (CH3)2CHOH + Mg(OH)Br}

e. Propan-1-ol: the CH₃ group must be joined to two more carbons with the OH on the end, so use oxirane (ethylene oxide), then dilute acid.

CHX3MgBr+CX2HX4O→dry etherCHX3CHX2CHX2OMgBr→HX2O/HX+CHX3CHX2CHX2OH+Mg(OH)Br \ce{CH3MgBr + C2H4O ->[dry ether] CH3CH2CH2OMgBr ->[H2O/H+] CH3CH2CH2OH + Mg(OH)Br}

(Every aldehyde except methanal would put the OH in the middle of the chain; methanal with CH₃MgBr stops at ethanol.)

14.

How would you prepare a Grignard reagent from an aryl halide? Write the structural formula and IUPAC name of each of the following with the formula C₃H₈O:

  • a.a primary alcohol
  • b.a secondary alcohol
  • c.Prepare these alcohols from Grignard reagents.
Answer

From an aryl halide. Warm bromobenzene with magnesium in dry ether (or tetrahydrofuran, which works better for aryl halides):

CX6HX5Br+Mg→dry etherCX6HX5MgBr \ce{C6H5Br + Mg ->[dry ether] C6H5MgBr}

This gives phenylmagnesium bromide.

C₃H₈O has three structures: two alcohols and one ether.

CCCOHHHHHHHHpropan-1-ol (1°)CCCOHHHHHHHHpropan-2-ol (2°)CCOCHHHHHHHHmethoxyethane (ether)CCCOHHHHHHHHpropan-1-ol (1°)CCCOHHHHHHHHpropan-2-ol (2°)CCOCHHHHHHHHmethoxyethane (ether)
Figure 17.21 The three compounds C₃H₈O.
  • a.Propan-1-ol, CH₃CH₂CH₂OH, primary.
  • b.Propan-2-ol, CH₃CH(OH)CH₃, secondary.
  • c.Propan-1-ol from ethylmagnesium bromide and methanal:

HCHO+CHX3CHX2MgBr→dry etherCHX3CHX2CHX2OMgBr→HX2O/HX+CHX3CHX2CHX2OH+Mg(OH)Br \ce{HCHO + CH3CH2MgBr ->[dry ether] CH3CH2CH2OMgBr ->[H2O/H+] CH3CH2CH2OH + Mg(OH)Br}

Propan-2-ol from methylmagnesium bromide and ethanal:

CHX3CHO+CHX3MgBr→dry ether(CHX3)X2CHOMgBr→HX2O/HX+(CHX3)X2CHOH+Mg(OH)Br \ce{CH3CHO + CH3MgBr ->[dry ether] (CH3)2CHOMgBr ->[H2O/H+] (CH3)2CHOH + Mg(OH)Br}

(Propan-2-ol also comes from ethyl methanoate and two CH₃MgBr.)