Skip to content

← Grade 12 Biology

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

12 questions

Unit 12 · Sexual Reproduction

Printable PDFs

B. Answer the following questions

1.

What is microsporogenesis? Where does it occur?

Answer

Microsporogenesis is the formation of haploid microspores (which become pollen grains) from diploid microspore mother cells by meiosis.

It occurs in the microsporangia (pollen sacs) of the anther. A typical anther has four pollen sacs, two in each lobe. Each is surrounded by a wall of epidermis, endothecium, middle layers and tapetum, and is filled at first with sporogenous tissue. These cells become microspore mother cells (2n); each divides by meiosis into a tetrad of four microspores (n). The microspores separate and develop into pollen grains, nourished by the tapetum.

2.

Describe the structure of a mature female gametophyte (embryo sac).

Answer

The mature embryo sac of a typical angiosperm (Polygonum type) lies in the nucellus of the ovule. It is an oval sac that is 7-celled and 8-nucleate:

  1. Egg apparatus, at the micropylar end: three cells.
    • The egg cell (n), which fuses with a male gamete to form the zygote.
    • Two synergids (n), one on each side of the egg. Each has a filiform apparatus at its micropylar tip, which guides the pollen tube in; one synergid receives the pollen tube.
  2. Antipodal cells, at the chalazal end: three cells (n), which degenerate after fertilization (they may help nourish the sac).
  3. Central cell: the large middle cell, containing two polar nuclei (n + n), which may fuse into a diploid secondary nucleus before fertilization. With the second male gamete it forms the primary endosperm nucleus (3n).

Diagram: draw an oval sac, micropyle below: at the micropylar end the egg between two synergids, at the chalazal end three antipodals, and two polar nuclei in the middle (as in Figure 12.5); label egg, synergids, filiform apparatus, polar nuclei, central cell, antipodals, micropylar end and chalazal end.

3.

Why are cross-pollinated plants better adapted for evolution?

Answer

Evolution needs heritable variation, on which natural selection acts. Cross-pollination brings it:

  1. It brings pollen from a different plant, so each seed gets genes from two genetically different parents. With crossing over and independent assortment in meiosis, each seed is a new combination of genes.
  2. The offspring therefore vary: some are better at resisting a new disease, standing drought, cold or a changed climate. These survive and reproduce more, and the population adapts.
  3. Harmful recessive genes are hidden in heterozygotes, so cross-pollinated plants suffer less from inbreeding depression and are often more vigorous (hybrid vigor).
  4. New useful combinations of genes can arise and spread, which over long periods can lead to new varieties and species.

A self-pollinated plant’s offspring are nearly identical, so a change in the environment can wipe them all out.

4.

What type of pollination is practiced by flowers pollinated by bats? Mention some floral adaptations supporting it.

Answer

Pollination by bats is chiropterophily, a kind of zoophily (pollination by animals). Examples: the sausage tree (Kigelia), the baobab, many wild bananas, durian.

Floral adaptations:

  1. The flowers open at night, when bats feed.
  2. They are large and strong (often bowl- or brush-shaped), able to bear the weight and clawing of a bat.
  3. They are white, cream, greenish or dull purple or maroon (bright colors would be wasted at night); pale ones show up in dim light.
  4. They have a strong, musty or fruity smell, by which bats find them.
  5. They make plenty of nectar and a lot of pollen, food enough for a large animal.
  6. They are often held clear of the leaves, hanging on long stalks or growing on the trunk, so a flying bat can reach them easily.
  7. Their many stamens dust the bat’s face and fur with pollen, which it carries to the next flower.
5.

Mention the advantages and disadvantages of self-pollination.

Answer

Advantages:

  1. It keeps the characters of a variety pure (a pure line).
  2. It is economical: little pollen is wasted.
  3. It doesn’t depend on wind, water, animals or another plant.
  4. The flowers needn’t make showy petals, scent or nectar.
  5. Seed production is almost certain.

Disadvantages:

  1. It gives no new combinations of genes, so little variation.
  2. The offspring are less able to adapt to new conditions or diseases.
  3. Continued self-pollination brings harmful recessive characters together: the plants become weaker and less productive (inbreeding depression).
  4. Unwanted characters are passed on.
  5. It contributes little to evolution.
6.

Compare self-pollination and cross-pollination.

Answer
Self-pollination Cross-pollination
Pollen goes to the stigma of the same flower or another flower of the same plant. Pollen goes to the stigma of a flower on another plant of the same species.
Needs no outside agent (autogamy), or one only for geitonogamy. Always needs an outside agent: wind, water or animals.
Flowers are often small, without bright color, scent or nectar. Flowers are often showy, scented, with nectar (animal-pollinated), or make huge amounts of pollen (wind-pollinated).
Little pollen is made; it is economical. Much pollen is made, and much is wasted.
Anthers and stigma ripen together (homogamy); some flowers never open (cleistogamy). Anthers and stigma often ripen at different times (dichogamy), or the plant is self-incompatible or has separate male and female plants.
Offspring are like the parent: it keeps pure lines. Offspring vary: new combinations of genes.
Seed setting is nearly certain. Seed setting is less certain.
Little variation; poorer adaptation; may lead to inbreeding depression. More variation and adaptation; often hybrid vigor; important in evolution.
Examples: wheat, rice, pea, Commelina (closed flowers). Examples: maize, mustard, papaya, apple, sunflower.
7.

Explain the process of fertilization with a diagram.

Answer

Fertilization in angiosperms is double fertilization:

  1. Pollen germination. A compatible pollen grain on the stigma absorbs water and sugars and puts out a pollen tube through a germ pore. The tube grows down the style to the ovary, carrying the tube nucleus and the two male gametes (the generative cell divides in the tube if it hasn’t already). Fertilization by means of a pollen tube is siphonogamy.
  2. Entry into the ovule. The tube enters the ovule usually through the micropyle (porogamy); sometimes through the chalaza (chalazogamy) or the integuments (mesogamy), which together are aporogamy.
  3. Entry into the embryo sac. Guided by the filiform apparatus, the tube enters one synergid, which degenerates; the tube bursts and releases the two male gametes.
  4. Syngamy. One male gamete (n) fuses with the egg (n), forming the zygote (2n), which becomes the embryo.
  5. Triple fusion. The other male gamete (n) fuses with the two polar nuclei (n + n) or the secondary nucleus (2n) in the central cell, forming the primary endosperm nucleus (3n), which becomes the endosperm.
  6. The other synergid and the antipodals degenerate. The ovule becomes the seed and the ovary the fruit.

Diagram: draw an ovule cut lengthwise (as in Figure 12.5) with a pollen tube coming down from the stigma through the style and entering the micropyle, its tip in a synergid; show one male gamete going to the egg and the other to the two polar nuclei; label pollen tube, micropyle, synergid, egg, male gametes, polar nuclei, antipodals, integuments, nucellus and funiculus.

8.

Write short notes about the endosperm.

Answer

The endosperm is the food-storing tissue of the seed in angiosperms, which nourishes the developing embryo (and, in many seeds, the seedling).

  • Origin: it develops from the primary endosperm nucleus (PEN), formed by triple fusion of the second male gamete (n) with the two polar nuclei or the secondary nucleus (2n). So it is usually triploid (3n).
  • Its development begins before the embryo’s, so there is food ready for the embryo.
  • Types of development:
    1. Nuclear: the PEN divides repeatedly without walls into many free nuclei, pushed to the edge by a central vacuole; walls form later. The commonest type: coconut (its water is free-nuclear endosperm, its white flesh cellular endosperm), maize, wheat.
    2. Cellular: a wall forms after every division, so it is cellular from the start: Petunia, Datura, balsam.
    3. Helobial: the first division is followed by a wall, giving a large micropylar and a small chalazal cell; the micropylar cell then develops like the nuclear type. Found in monocots: Eremurus.
  • Fate: in endospermic (albuminous) seeds it stays in the ripe seed (maize, wheat, rice, castor, coconut); in non-endospermic (exalbuminous) seeds the embryo uses it up and stores the food in its cotyledons (pea, gram, bean, groundnut).
  • Importance: the endosperm of cereals (rice, wheat and maize flour) and coconut is a large part of the world’s food.
9.

Explain microgametogenesis and the formation of the male gametophyte.

Answer

Microgametogenesis is the development of a haploid microspore into the mature male gametophyte (the pollen grain with its male gametes).

  1. After meiosis, each microspore (n) separates from its tetrad and develops a two-layered wall: an outer exine of sporopollenin with germ pores, and an inner intine of cellulose and pectin.
  2. The microspore enlarges; a vacuole pushes its nucleus to the wall.
  3. The nucleus divides by mitosis, unequally, into two cells:
    • a large vegetative (tube) cell, with abundant cytoplasm and food reserves and a large, irregular nucleus;
    • a small generative cell, with a spindle-shaped nucleus and little cytoplasm, which comes away from the wall and floats in the vegetative cell’s cytoplasm.
  4. In over 60% of angiosperms the pollen is shed at this two-celled stage; the generative cell divides by mitosis into two male gametes later, in the pollen tube. In the rest (such as grasses and the mustard family) it divides before shedding, and the pollen is three-celled.
  5. On a compatible stigma the pollen absorbs water and swells, and the intine grows out through a germ pore as the pollen tube, carrying the tube nucleus and the two male gametes.

So the mature male gametophyte is three cells: the vegetative (tube) cell and two male gametes, all haploid.

Diagram: draw the stages in a row, as in the pollen widget earlier in this unit: microspore, two-celled pollen grain (vegetative and generative cells), three-celled grain, and the germinated grain with its tube.

10.

Explain the development of the female gametophyte in angiosperms with a necessary diagram.

Answer

The female gametophyte, the embryo sac, develops in the nucellus of the ovule in two steps.

Megasporogenesis:

  1. A cell of the nucellus near the micropylar end enlarges into the archesporial cell, which becomes (directly, or after cutting off a wall cell) the megaspore mother cell (MMC, 2n).
  2. The MMC divides by meiosis into four haploid megaspores in a row, a linear tetrad.
  3. Three megaspores degenerate; usually the chalazal one survives as the functional megaspore.

Megagametogenesis:

  • 4.The functional megaspore enlarges into the young embryo sac. Its nucleus divides by mitosis into two, which move to the two poles.
  • 5.Two more mitoses at each pole give four nuclei at each pole, eight in all. These divisions are free nuclear.
  • 6.One nucleus from each pole moves to the middle: the two polar nuclei.
  • 7.Walls form, organizing the sac into seven cells: at the micropylar end the egg apparatus (an egg and two synergids), at the chalazal end three antipodals, and the large central cell with the two polar nuclei.

The mature embryo sac is 7-celled and 8-nucleate (monosporic, Polygonum type).

Diagram: draw the stages in a row: the MMC in the nucellus; the linear tetrad with three megaspores degenerating; the 2-, 4- and 8-nucleate sac; the mature sac with its seven cells labeled (as in Figure 12.5).

11.

Observe the diagram above carefully and answer the following questions.

  • a.Name the figure.
  • b.Label B, C, D and E.
  • c.Which one of the labeled parts becomes triploid after fertilization?
  • d.Which one of them forms the zygote after fertilization?
Answer
  • a.An anatropous ovule cut lengthwise (L.S. of an ovule), showing the mature embryo sac.
  • b.B: egg cell; C: synergid; D: micropyle; E: funiculus. (A is the polar nuclei in the central cell.)
  • c.A, the polar nuclei (central cell): with the second male gamete they form the triploid primary endosperm nucleus (triple fusion).
  • d.B, the egg cell: it fuses with a male gamete to form the zygote (syngamy).
12.

Describe the role of the suspensor in embryo development, highlighting the differences observed between monocot and dicot plants.

Answer

The suspensor is a short-lived stalk of cells, formed from the basal cell of the two-celled embryo, that holds the young embryo. Its roles:

  1. It pushes the embryo deep into the endosperm, into the food supply.
  2. It absorbs food from the endosperm and the surrounding tissues and passes it to the embryo; its large basal cell often works as a haustorium.
  3. It makes plant hormones (gibberellins, for example, found in bean suspensors) that help the young embryo grow.
  4. It degenerates once the embryo is formed; in the mature seed it is gone.

Differences between dicots and monocots:

Dicots (Capsella) Monocots
The basal cell divides into a filament of 6 to 10 cells. The suspensor is often one large, swollen (vesicular) cell, or a few cells.
The suspensor’s last cell, the hypophysis, becomes part of the embryo: it forms the tip of the radicle and the root cap. The basal cell forms no part of the embryo; the radicle comes from the terminal cell’s middle derivative, which also adds a few cells to the suspensor.
The micropylar end cell enlarges as a haustorium. The large vesicular cell itself absorbs food.