Skip to content

← Grade 11 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

23 questions

Unit 2 · Stoichiometry

Printable PDFs

Answer these questions

13.

State the following laws, with an example of each:

  • a.the law of multiple proportions
  • b.the law of reciprocal proportions
  • c.Gay-Lussac’s law of gaseous volumes
Answer
  • a.Law of multiple proportions: when two elements combine to form more than one compound, the masses of one element that combine with a fixed mass of the other are in a ratio of small whole numbers. Example: in CO, 12 g of carbon combines with 16 g of oxygen; in CO₂, with 32 g. The ratio 16 : 32 = 1 : 2.
  • b.Law of reciprocal proportions: if two elements each combine with a fixed mass of a third element, the ratio of their masses is the same as, or a simple multiple of, the ratio in which they combine with each other. Example: with 32 g of oxygen, carbon combines with 12 g (CO₂) and sulphur with 32 g (SO₂): C : S = 12 : 32 = 3 : 8. In CS₂, C : S = 12 : 64 = 3 : 16. The ratios differ by a factor of 2, a simple multiple.
  • c.Gay-Lussac’s law: when gases react, the volumes of the reacting gases and of any gaseous products are in a ratio of small whole numbers, at the same temperature and pressure. Example: HX2(g)+ClX2(g)→2 HCl(g) \ce{H2(g) + Cl2(g) -> 2HCl(g)} : 1 volume of hydrogen and 1 volume of chlorine give 2 volumes of hydrogen chloride, 1 : 1 : 2.
14.

State Avogadro’s law. Write any four of its applications.

Answer

Avogadro’s law: equal volumes of all gases, at the same temperature and pressure, contain equal numbers of molecules.
Applications (any four):

  • a.It shows that the molecules of gaseous elements such as hydrogen, oxygen, nitrogen and chlorine have two atoms (H₂, O₂, N₂, Cl₂): 1 volume of hydrogen and 1 of chlorine give 2 volumes of hydrogen chloride.
  • b.It gives the relation molecular mass = 2 × vapor density, so the molecular mass of a gas can be found by weighing it.
  • c.It gives the molar volume: 1 mol of any gas occupies 22.4 L at STP.
  • d.It links the volume of a gas to its number of molecules: 22.4 L at STP holds 6.022 × 10²³ molecules.
  • e.It helps find the molecular formula of a gas from the volumes of gases that react and form (as for the oxides of nitrogen in 2.3).
  • f.It explains Gay-Lussac’s law of gaseous volumes.
15.

Differentiate between:

  • a.limiting reactant and excess reactant
  • b.the law of conservation of mass and the law of constant composition
  • c.experimental yield and theoretical yield
Answer

a.

Limiting reactant Excess reactant
It is used up completely in the reaction. Some of it is left over when the reaction stops.
It decides the amount of product formed. Adding more of it gives no more product.
It gives the smaller number of moles ÷ coefficient. It gives the larger number of moles ÷ coefficient.

b.

Law of conservation of mass Law of constant composition
It is about a reaction: the total mass before equals the total mass after. It is about a compound: its elements are always in the same proportion by mass.
It is why equations must be balanced. It is why a compound has one formula.
Example: 2 × 2 g of H₂ + 32 g of O₂ give 36 g of water. Example: water from any source is 1 part hydrogen to 8 parts oxygen by mass.

c.

Experimental (actual) yield Theoretical yield
The amount of product actually obtained, by weighing or measuring it. The most product the reaction could give, worked out from the equation.
It is usually less than the theoretical yield. It assumes all of the limiting reactant turns into product.
It depends on how the reaction is done. It depends only on the amount of limiting reactant.
16.

Identify the law shown by each set of data, and show that the data follow it.

  • a.Experiment 1: carbon dioxide (CO₂) contains 27.27% carbon, carbon disulphide (CS₂) 15.79% carbon, and sulphur dioxide (SO₂) 50% sulphur.
  • b.Experiment 2: copper sulphide (CuS) contains 66.49% copper, copper oxide (CuO) 79.87% copper, and sulphur trioxide (SO₃) 40% sulphur.
  • c.Experiment 3: two oxides of carbon contain 42.9% and 27.3% carbon.
Answer

a. The law of reciprocal proportions (carbon and sulphur each combine with oxygen, and with each other).
In CO₂: C : O = 27.27 : 72.73, so 1 g of oxygen combines with 27.27/72.73 = 0.375 g of carbon. In SO₂: S : O = 50 : 50, so 1 g of oxygen combines with 1 g of sulphur. With the same mass of oxygen, C : S = 0.375 : 1 = 3 : 8.
In CS₂: C : S = 15.79 : 84.21 = 3 : 16.
3/8 ÷ 3/16 = 2, a simple whole number, so the law holds.

b. The law of reciprocal proportions (sulphur and oxygen each combine with copper, and with each other).
In CuS: 1 g of copper combines with 33.51/66.49 = 0.504 g of sulphur. In CuO: 1 g of copper combines with 20.13/79.87 = 0.252 g of oxygen. With the same mass of copper, S : O = 0.504 : 0.252 = 2 : 1.
In SO₃: S : O = 40 : 60 = 2 : 3.
(2/1) ÷ (2/3) = 3, a simple whole number, so the law holds.

c. The law of multiple proportions (two compounds of the same two elements).
First oxide: 57.1 g of oxygen to 42.9 g of carbon, so 1 g of carbon combines with 57.1/42.9 = 1.33 g of oxygen. Second oxide: 1 g of carbon combines with 72.7/27.3 = 2.66 g of oxygen.
1.33 : 2.66 = 1 : 2, a small whole-number ratio, so the law holds. (They are CO and CO₂.)

17.
  • a.What is atomic mass? Why is the atomic mass of many elements a fraction?
  • b.Equal numbers of sodium atoms and aluminium atoms are put in the two pans of a balance, A and B. Pan B hangs lower than pan A. Which pan holds which atoms? Give a reason.
Answer
  • a.The relative atomic mass of an element is the average mass of its atoms compared with 1/12 of the mass of a carbon-12 atom. It is often a fraction because most elements are a mixture of isotopes, atoms of different masses, and the atomic mass is their average weighted by how common each is: chlorine is 75.8% chlorine-35 and 24.2% chlorine-37, so its atomic mass is 35.45. (Even one isotope’s mass is not exactly a whole number, because protons and neutrons are not exactly 1 amu each and some mass is lost as binding energy.)
  • b.Pan A holds the sodium atoms, and pan B the aluminium atoms. An aluminium atom (27 amu) is heavier than a sodium atom (23 amu), so equal numbers of aluminium atoms weigh more, and their pan hangs lower.
18.

For the reaction 2 S(s)+3 OX2(g)→2 SOX3(g) \ce{2S(s) + 3O2(g) -> 2SO3(g)} , Aman reacts 6.3 g of sulphur with 10.0 g of oxygen.

  • a.Calculate the number of moles of each reactant.
  • b.Which is the limiting reactant?
  • c.Find the mass of SO₃ produced.
Answer
  • a.S: 6.3/32 = 0.197 mol. O₂: 10.0/32 = 0.3125 mol.
  • b.S: 0.197 ÷ 2 = 0.0984; O₂: 0.3125 ÷ 3 = 0.104. Sulphur’s number is smaller, so sulphur is the limiting reactant. (0.197 mol of S needs 0.295 mol of O₂, and there is 0.3125 mol.)
  • c.2 mol of S give 2 mol of SO₃, so 0.197 mol of SO₃ = 0.197 × 80 = 15.75 g.
19.

Sneha has two beakers of gas: one holds 0.60 mol of hydrogen, and the other 1.50 mol of helium.

  • a.Calculate the number of molecules and the number of atoms in each.
  • b.Which gas would occupy the larger volume at STP? Why?
Answer

a. Hydrogen: molecules = 0.60 × 6.022 × 10²³ = 3.61 × 10²³; each H₂ has 2 atoms, so atoms = 7.23 × 10²³.
Helium: helium is a monatomic gas, so its molecules are single atoms: molecules = atoms = 1.50 × 6.022 × 10²³ = 9.03 × 10²³.
b. Helium: 1.50 × 22.4 = 33.6 L against 0.60 × 22.4 = 13.4 L for hydrogen. By Avogadro’s law, the volume of a gas depends on its number of molecules, and helium has more.

20.

The molecular models show methane burning in oxygen to give carbon dioxide and water.

  • a.Write the balanced chemical equation shown by the models.
  • b.Find the ratio of the numbers of moles of methane and oxygen in the equation.
  • c.Calculate the number of moles of O₂ needed for the complete combustion of 0.5 mol of methane.
Answer
  • a.CHX4+2 OX2→COX2+2 HX2O \ce{CH4 + 2O2 -> CO2 + 2H2O}
  • b.CH₄ : O₂ = 1 : 2.
  • c.0.5 × 2 = 1 mol of O₂.
21.

Carbon dioxide is made in the laboratory from limestone and hydrochloric acid. Shreya mixes 68.1 g of solid CaCO₃ with 51.6 g of HCl.

  • a.Write the balanced chemical equation for the reaction.
  • b.Identify the limiting reactant.
  • c.What mass and volume of CO₂ are produced at STP?
Answer
  • a.CaCOX3(s)+2 HCl(aq)→CaClX2(aq)+COX2(g)+HX2O(l) \ce{CaCO3(s) + 2HCl(aq) -> CaCl2(aq) + CO2(g) + H2O(l)}
  • b.CaCO₃: 68.1/100 = 0.681 mol, which needs 2 × 0.681 = 1.362 mol of HCl. HCl: 51.6/36.5 = 1.414 mol, more than needed. So CaCO₃ is the limiting reactant.
  • c.0.681 mol of CaCO₃ gives 0.681 mol of CO₂: mass = 0.681 × 44 = 29.96 g; volume = 0.681 × 22.4 = 15.25 L at STP.
22.

In the reaction 3 NaBr+HX3POX4→3 HBr+NaX3POX4 \ce{3NaBr + H3PO4 -> 3HBr + Na3PO4} , Anish uses 200.0 g of each reactant (Na = 23, Br = 79.9, P = 31).

  • a.Which is the limiting reactant?
  • b.What is the theoretical yield of each product, in grams?
  • c.How much of the excess reactant remains unreacted, assuming a 100% yield?
  • d.If the percentage yield is only 70.0%, what is the actual yield of each product?
Answer

Molar masses: NaBr 102.9, H₃PO₄ 98.0, HBr 80.9, Na₃PO₄ 164.0 g/mol.
Moles: NaBr 200.0/102.9 = 1.944 mol; H₃PO₄ 200.0/98.0 = 2.041 mol.

  • a.NaBr: 1.944 ÷ 3 = 0.648; H₃PO₄: 2.041 ÷ 1 = 2.041. NaBr is the limiting reactant.
  • b.HBr: 1.944 mol (3 : 3) × 80.9 = 157.3 g. Na₃PO₄: 1.944 ÷ 3 = 0.648 mol × 164.0 = 106.3 g.
  • c.H₃PO₄ used = 0.648 mol = 0.648 × 98.0 = 63.5 g. Left = 200.0 − 63.5 = 136.5 g of H₃PO₄.
  • d.HBr: 0.700 × 157.3 = 110.1 g. Na₃PO₄: 0.700 × 106.3 = 74.4 g.
23.

When 28 g of N₂ reacts with excess H₂, only 30 g of ammonia is produced. What is the percentage yield? How can the percentage yield be increased?

Answer

NX2+3 HX2⇌2 NHX3 \ce{N2 + 3H2 <=> 2NH3} . 28 g of N₂ = 1 mol, which can give 2 mol of NH₃ = 34 g, the theoretical yield.
Percentage yield = 30/34 × 100% = 88.2%.
The reaction is reversible, so the yield can be raised by:

  • a.a high pressure: 4 volumes of gas become 2, so a higher pressure favors ammonia;
  • b.removing the ammonia as it forms, by cooling the gases until the ammonia turns liquid, and sending the unreacted gases round again;
  • c.a lower temperature, since the reaction gives out heat (but then it is slow, so about 400–450 °C is used with an iron catalyst, which speeds it up without changing the yield);
  • d.handling the product carefully, so that none is lost.
24.

Sodium reacts violently with water, giving hydrogen and sodium hydroxide. How many grams of hydrogen are produced by 400 mg of sodium?

Answer

2 Na+2 HX2O→2 NaOH+HX2 \ce{2Na + 2H2O -> 2NaOH + H2}
400 mg = 0.400 g of Na = 0.400/23 = 0.0174 mol. 2 mol of Na give 1 mol of H₂, so H₂ = 0.0087 mol = 0.0087 × 2 = 0.0174 g (17.4 mg).

25.

Magnesium hydroxide, Mg(OH)₂, is used as an antacid. 0.5 mol of it is mixed with 0.2 mol of HCl:
Mg(OH)X2+2 HCl→MgClX2+2 HX2O \ce{Mg(OH)2 + 2HCl -> MgCl2 + 2H2O}

  • a.Find the limiting reactant.
  • b.What mass of each reactant is used?
  • c.Calculate the mass of magnesium chloride produced.
  • d.Find the mass of H₂SO₄ that would react completely with the 0.5 mol of Mg(OH)₂.
Answer
  • a.Mg(OH)₂: 0.5 ÷ 1 = 0.5; HCl: 0.2 ÷ 2 = 0.1. HCl is the limiting reactant (0.5 mol of Mg(OH)₂ would need 1.0 mol of HCl).
  • b.HCl used: 0.2 mol × 36.5 = 7.3 g. Mg(OH)₂ used: 0.1 mol × 58 = 5.8 g (0.4 mol, 23.2 g, is left over).
  • c.MgCl₂: 0.1 mol × 95 = 9.5 g.
  • d.Mg(OH)X2+HX2SOX4→MgSOX4+2 HX2O \ce{Mg(OH)2 + H2SO4 -> MgSO4 + 2H2O} : 0.5 mol of Mg(OH)₂ needs 0.5 mol of H₂SO₄ = 0.5 × 98 = 49 g.
26.

Methanol is used as a fuel for racing cars. It burns in the engine according to the equation
2 CHX3OH(l)+3 OX2(g)→2 COX2(g)+4 HX2O(g) \ce{2CH3OH(l) + 3O2(g) -> 2CO2(g) + 4H2O(g)}
Dolma mixes 40.0 g of methanol with 46.0 g of O₂.

  • a.What mass of CO₂ is produced?
  • b.Why is methanol used as a fuel?
  • c.Calculate the mass of methanol that burns completely in 0.5 kg of oxygen.
Answer
  • a.Methanol: 40.0/32 = 1.25 mol; O₂: 46.0/32 = 1.4375 mol. Methanol: 1.25 ÷ 2 = 0.625; O₂: 1.4375 ÷ 3 = 0.479. Oxygen is the limiting reactant. 3 mol of O₂ give 2 mol of CO₂, so CO₂ = 1.4375 × 2/3 = 0.958 mol = 0.958 × 44 = 42.2 g.
  • b.Methanol burns completely, with a clean flame and little soot or carbon monoxide; it resists knocking in an engine (a high octane number), so a racing engine can run at high compression; it is a liquid, easy to store and pour; and a methanol fire can be put out with water. (Its flame is almost invisible in daylight, which is one danger.)
  • c.0.5 kg = 500 g of O₂ = 500/32 = 15.625 mol. 3 mol of O₂ burn 2 mol of methanol, so methanol = 15.625 × 2/3 = 10.42 mol = 10.42 × 32 = 333.3 g.
27.

A chemist analyzes two compounds of carbon and oxygen. In the first, 2.00 g of carbon is combined with 2.66 g of oxygen; in the second, 2.00 g of carbon is combined with 5.32 g of oxygen.
The textbook gives 1.33 g of carbon, but the book’s numbers don’t work: they give C : O ratios of 2 : 3 and 1 : 3, C₂O₃ and CO₃, which are not stable compounds of carbon. With 2.00 g of carbon the same masses of oxygen give carbon monoxide and carbon dioxide.

  • a.Calculate the number of moles of each kind of atom in both compounds.
  • b.Find the empirical formulas of the two compounds.
  • c.How do the results support the law of multiple proportions?
Answer
  • a.Carbon in each: 2.00/12 = 0.167 mol. Oxygen: first compound 2.66/16 = 0.166 mol; second 5.32/16 = 0.333 mol.
  • b.First: C : O = 0.167 : 0.166 = 1 : 1, so CO. Second: C : O = 0.167 : 0.333 = 1 : 2, so CO₂.
  • c.The same mass of carbon, 2.00 g, combines with 2.66 g and 5.32 g of oxygen: 2.66 : 5.32 = 1 : 2, a ratio of small whole numbers, which is the law of multiple proportions. It comes about because one compound has one oxygen atom for each carbon atom and the other two.
28.

Three containers, A, B and C, each hold 22.4 L of a gas at STP: A hydrogen, B oxygen and C carbon dioxide.

  • a.Find the number of moles of gas in A.
  • b.Calculate the mass of gas in container B.
  • c.Find the number of gas molecules in container C.
  • d.Find the number of atoms in A.
  • e.Do these containers illustrate Avogadro’s law? Explain.
Answer
  • a.22.4 L ÷ 22.4 L = 1 mol of H₂.
  • b.1 mol of O₂ = 32 g.
  • c.1 mol of CO₂ = 6.022 × 10²³ molecules.
  • d.1 mol of H₂ has 2 mol of atoms: 2 × 6.022 × 10²³ = 1.204 × 10²⁴ atoms.
  • e.Yes. The three gases have the same volume at the same temperature and pressure, and each container holds 1 mol, the same number of molecules, 6.022 × 10²³: this is Avogadro’s law. Their masses (2 g, 32 g, 44 g) and numbers of atoms differ, but not their numbers of molecules.
29.

The first step of the Ostwald process for making nitric acid is the reaction of ammonia with oxygen, giving nitric oxide (NO) and water.

  • a.Write the balanced chemical equation for the reaction.
  • b.Find the mass of water produced when 1 kg of ammonia reacts.
  • c.If 0.1 mol of each reactant is mixed, which is the limiting reactant?
  • d.Calculate the volume of NO gas produced at NTP if 0.1 mol of each reactant reacts.
Answer
  • a.4 NHX3+5 OX2→4 NO+6 HX2O \ce{4NH3 + 5O2 -> 4NO + 6H2O} (on a hot platinum–rhodium gauze).
  • b.1000 g of NH₃ = 1000/17 = 58.8 mol. 4 mol of NH₃ give 6 mol of H₂O, so water = 58.8 × 6/4 = 88.2 mol = 88.2 × 18 = 1588 g (1.59 kg).
  • c.NH₃: 0.1 ÷ 4 = 0.025; O₂: 0.1 ÷ 5 = 0.020. Oxygen is the limiting reactant.
  • d.5 mol of O₂ give 4 mol of NO, so NO = 0.1 × 4/5 = 0.08 mol = 0.08 × 22.4 = 1.79 L.
30.

During combustion, nitrogen in the air reacts with oxygen at high temperatures to form nitrogen monoxide (NO), which reacts with more oxygen to form brown nitrogen dioxide gas (NO₂). Suppose 3.13 g of nitrogen monoxide reacts with 4.16 g of oxygen.

  • a.Write the balanced chemical equation for the reaction.
  • b.Which is the limiting reactant? Why?
  • c.What mass of nitrogen dioxide is formed?
  • d.Which reactant is left in excess, and what mass of it?
  • e.What is the environmental impact of this reaction?
Answer
  • a.2 NO+OX2→2 NOX2 \ce{2NO + O2 -> 2NO2}
  • b.NO: 3.13/30 = 0.1043 mol, ÷ 2 = 0.052. O₂: 4.16/32 = 0.130 mol, ÷ 1 = 0.130. NO is the limiting reactant, because it gives the smaller number: 0.1043 mol of NO needs only 0.052 mol of O₂.
  • c.2 mol of NO give 2 mol of NO₂: 0.1043 × 46 = 4.80 g.
  • d.Oxygen: used 0.052 mol = 1.67 g, so 4.16 − 1.67 = 2.49 g is left.
  • e.Nitrogen dioxide from vehicle engines, brick kilns and power plants is a major air pollutant. It irritates the lungs and worsens asthma; in sunlight it helps form ground-level ozone and photochemical smog (the brown haze over Kathmandu on still winter days is partly NO₂ and smog); and in the air it turns into nitric acid, which falls as acid rain, harming plants, soils and stone buildings.
31.

Nikita heats 56.6 g of calcium with 30.5 g of nitrogen to form calcium nitride. The reaction has a 93.0% yield.

  • a.Write the balanced chemical equation for the reaction.
  • b.Find the number of moles of each reactant.
  • c.What does it mean that the percentage yield of the reaction is 93%?
  • d.Find the mass of solid calcium nitride formed.
Answer
  • a.3 Ca+NX2→CaX3NX2 \ce{3Ca + N2 -> Ca3N2}
  • b.Ca: 56.6/40 = 1.415 mol. N₂: 30.5/28 = 1.089 mol.
  • c.It means the calcium nitride actually obtained is 93% of the most the reaction could give (its theoretical yield): for every 100 g it could give, 93 g is obtained, and 7 g is lost (an incomplete reaction, side reactions, handling).
  • d.Ca: 1.415 ÷ 3 = 0.472; N₂: 1.089 ÷ 1 = 1.089. Calcium is the limiting reactant. Ca₃N₂ (148 g/mol) = 0.472 mol: theoretical yield = 0.4717 × 148 = 69.8 g. Actual yield = 0.930 × 69.8 = 64.9 g.
32.

Milan adds aluminium sulphide (48.0 g) to water (32.0 g):
AlX2SX3(s)+HX2O(l)→Al(OH)X3(s)+HX2S(g) \ce{Al2S3(s) + H2O(l) -> Al(OH)3(s) + H2S(g)}

  • a.Balance the chemical equation.
  • b.Define limiting reactant, and identify it in this reaction.
  • c.What mass of Al(OH)₃ is produced?
  • d.What mass of the excess reactant remains after the reaction is complete?
Answer
  • a.AlX2SX3(s)+6 HX2O(l)→2 Al(OH)X3(s)+3 HX2S(g) \ce{Al2S3(s) + 6H2O(l) -> 2Al(OH)3(s) + 3H2S(g)}
  • b.The limiting reactant is the reactant used up first in a reaction, which so decides the amount of product formed.

Al₂S₃ (150 g/mol): 48.0/150 = 0.320 mol, ÷ 1 = 0.320. H₂O: 32.0/18 = 1.778 mol, ÷ 6 = 0.296. Water is the limiting reactant.

  • c.6 mol of H₂O give 2 mol of Al(OH)₃: 1.778 × 2/6 = 0.593 mol × 78 = 46.2 g.
  • d.Al₂S₃ used = 1.778 ÷ 6 = 0.296 mol = 44.4 g; left = 48.0 − 44.4 = 3.6 g of Al₂S₃.
33.

Hydrogen sulphide breaks down into hydrogen and sulphur at 2000 °C:
HX2S→HX2+S \ce{H2S -> H2 + S}
When Bibek heated 0.250 g of hydrogen sulphide, 13 mg of H₂ was produced.

  • a.Why is 13 mg called the experimental yield of the process? Convert it into a volume at STP.
  • b.Calculate the theoretical yield from the equation.
  • c.Find the percentage yield of the process.
  • d.Write any two ways by which the percentage yield of the reaction can be increased.
Answer
  • a.It is the amount of hydrogen actually obtained in the experiment, measured, not worked out from the equation. 13 mg = 0.013 g = 0.013/2 = 0.0065 mol = 0.0065 × 22.4 = 0.146 L (146 mL) at STP.
  • b.0.250 g of H₂S = 0.250/34 = 0.007 35 mol, which can give 0.007 35 mol of H₂ = 0.0147 g (14.7 mg).
  • c.Percentage yield = 13/14.7 × 100% = 88.4%.
  • d.Any two: remove the products as they form (the sulphur condenses out on cooling, and hydrogen can be drawn off), so the reverse reaction can’t take place; keep the temperature high, since the breaking down takes in heat; give the gas more time in the hot zone; use pure hydrogen sulphide; collect the hydrogen carefully, without leaks.

The textbook doesn’t give the mass of hydrogen sulphide, without which the theoretical yield can’t be found; 0.250 g has been added.

34.

Kushal prepares oxygen gas in the laboratory by heating potassium chlorate (KClO₃) in a hard-glass test tube, with a little manganese dioxide, and the gas is collected over water in a gas jar: x g of KClO₃ gives 2.24 L of O₂, measured at STP.

  • a.Write the balanced chemical equation for the decomposition of KClO₃ in the presence of heat.
  • b.Find the number of moles of oxygen produced in the gas jar.
  • c.What is the value of x that gives this amount of oxygen?
  • d.If 13 g of KClO₃ gives the same volume of oxygen under the same conditions, calculate the percentage yield of the reaction.
  • e.Calculate the mass of magnesium that reacts completely with the oxygen produced.
Answer
  • a.2 KClOX3→MnOX2Δ2 KCl+3 OX2 \ce{2KClO3 ->[\Delta][MnO2] 2KCl + 3O2} (manganese dioxide is the catalyst).
  • b.2.24 L ÷ 22.4 L = 0.1 mol of O₂.
  • c.3 mol of O₂ come from 2 mol of KClO₃, so 0.1 mol comes from 0.0667 mol of KClO₃ (122.5 g/mol): x = 0.0667 × 122.5 = 8.17 g.
  • d.13 g of KClO₃ = 13/122.5 = 0.106 mol, which could give 0.106 × 3/2 = 0.159 mol of O₂, the theoretical yield. Only 0.1 mol was obtained: percentage yield = 0.1/0.159 × 100% = 62.8%.
  • e.2 Mg+OX2→2 MgO \ce{2Mg + O2 -> 2MgO} : 0.1 mol of O₂ reacts with 0.2 mol of Mg = 0.2 × 24 = 4.8 g.
35.

Solve these numerical problems.

  • a.Calculate the mass of 6.022 × 10²³ molecules of NH₄Cl.
  • b.An atom of an element Y has a mass of 6.644 × 10⁻²³ g. Calculate the number of gram atoms in 40 kg of it.
  • c.If a mole contained 1 × 10²⁴ particles, what would be the mass of (i) one mole of oxygen, O₂ (ii) a single oxygen molecule?
  • d.Pragya weighs a steel cylinder of compressed oxygen and finds its mass is 1027.8 g. After using some of the oxygen in an experiment, the cylinder’s mass is 1023.2 g. How many moles of oxygen gas were used?
  • e.Calculate the mass of aluminium that has the same number of atoms as 6.35 g of copper.
  • f.The mass of a diamond is given in carats; one carat is 200 mg. A pure diamond is made entirely of carbon atoms. How many carbon atoms make up a 1.00 carat diamond?
  • g.Element X combines with element Y to form two compounds. In the first, 12 g of X combines with 8 g of Y; in the second, 18 g of X combines with 24 g of Y. Show that these follow the law of multiple proportions.
  • h.CO, CO₂ and CₓOᵧ are oxides of carbon. A 2.50 g sample of CₓOᵧ contains 1.32 g of carbon and 1.18 g of oxygen. Find x and y.
  • i.In an experiment, 4.70 g of H₂ reacts with excess N₂, and 12.5 g of NH₃ is formed. What is the percentage yield?
  • j.The equation for a reaction in the making of methanol is COX2+3 HX2→CHX3OH+HX2O \ce{CO2 + 3H2 -> CH3OH + H2O} . What is the most methanol that can be formed from 2 mol of carbon dioxide and 3 mol of hydrogen?
  • k.Methyl salicylate (oil of wintergreen, the smell of many pain-relief balms) contains carbon, hydrogen and oxygen. When a 5.287 g sample is burned in excess oxygen, 12.24 g of carbon dioxide and 2.522 g of water are formed. What is its empirical formula?
Answer
  • a.6.022 × 10²³ molecules is 1 mol: 14 + 4 + 35.5 = 53.5 g. (NH₄Cl is ionic, so “formula units” is the exact word.)
  • b.Atomic mass of Y = 6.644 × 10⁻²³ × 6.022 × 10²³ = 40.0 (it is calcium). 40 kg = 40 000 g, so gram atoms = 40 000/40 = 1000.
  • c.The mass of one molecule doesn’t depend on how a mole is defined: (ii) 32 g ÷ 6.022 × 10²³ = 5.31 × 10⁻²³ g. Then (i) one such mole would be 1 × 10²⁴ × 5.31 × 10⁻²³ g = 53.1 g.
  • d.Oxygen used = 1027.8 − 1023.2 = 4.6 g = 4.6/32 = 0.144 mol.
  • e.Cu: 6.35/63.5 = 0.1 mol of atoms; 0.1 mol of Al = 0.1 × 27 = 2.7 g.
  • f.200 mg = 0.200 g of carbon = 0.200/12 = 0.0167 mol; atoms = 0.0167 × 6.022 × 10²³ = 1.00 × 10²².
  • g.Take a fixed mass of X, 12 g. In the first compound it combines with 8 g of Y. In the second, 18 g of X combines with 24 g of Y, so 12 g of X combines with 24 × 12/18 = 16 g of Y. The masses of Y with the same mass of X are 8 : 16 = 1 : 2, a ratio of small whole numbers: the law of multiple proportions.

The textbook gives only the mass of X in the second compound, 18 g, and asks for the mass of Y in it, which can’t be found without more data (it would be 12 g only if the two were the same compound); 24 g of Y has been given here instead.

  • h.C: 1.32/12 = 0.110 mol; O: 1.18/16 = 0.0738 mol. C : O = 1.49 : 1 = 3 : 2. So x = 3, y = 2: C₃O₂, carbon suboxide, a real, foul-smelling gas.
  • i.NX2+3 HX2→2 NHX3 \ce{N2 + 3H2 -> 2NH3} . 4.70 g of H₂ = 2.35 mol, which gives 2.35 × 2/3 = 1.567 mol of NH₃ = 26.6 g, the theoretical yield. Percentage yield = 12.5/26.6 × 100% = 46.9%.
  • j.CO₂: 2 ÷ 1 = 2; H₂: 3 ÷ 3 = 1. Hydrogen is the limiting reactant: 3 mol of H₂ give 1 mol of CH₃OH = 32 g.
  • k.All the carbon goes into CO₂ and all the hydrogen into water. C = 12.24 × 12/44 = 3.338 g = 0.278 mol. H = 2.522 × 2/18 = 0.280 g = 0.280 mol. O = 5.287 − 3.338 − 0.280 = 1.669 g = 0.104 mol. Dividing by 0.104: C 2.67 : H 2.69 : O 1, and multiplying by 3: 8 : 8 : 3. The empirical formula is C₈H₈O₃ (which is also its molecular formula).