Around the house · 58 of 58
Tighten the screw on your glasses
Expert guidance
What you need
A tiny screwdriver, and a light-colored cloth on the table, so a dropped screw shows.
Do this
- Line up the arms, and find the one that’s loose.
- Lay the glasses on the cloth, not in your hand.
- Fit the screwdriver in the hinge screw and turn it clockwise.
- Stop when you feel slight resistance. Too tight and the arm won’t fold.
- Fold and open the arm. Does it stay put?
- Screw lost, or the frame still loose or bent? An optician can fix it.
Why this way
Hinge screws work loose with use. A small, gentle turn is all it takes, and over-tightening does harm. Expert guidance.
Do it today
Hold your glasses by one arm and shake them gently. If the other arm swings, tighten it. Three minutes.
Where these facts come from
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
