Skip to content

← Fix It, in Practice

Around the house · 55 of 58

Reglue a loose chair joint

Expert guidance

What you need

White wood glue, a rag, sandpaper, a rubber mallet or a hammer on a block of wood, and a clamp or a strong rope.

Do this

  1. Look for hidden screws or nails, and take them out. Mark which part goes where.
  2. Tap the joint apart gently, close to the joint, with the mallet.
  3. Scrape off the old glue from both parts. Sandpaper round a screwdriver cleans the hole.
  4. Put a light coat of glue on the joint, and fit it together quickly. It starts to dry in minutes.
  5. Clamp it tight. Wipe off what oozes out.
  6. Leave it as long as the glue’s pack says before anyone sits on it.

A bigger job

This is a bigger job than most here, a couple of hours for a whole chair plus drying. Do one joint first, with an adult. For a good old chair, ask a carpenter.

Why this way

A joint takes glue only on clean wood, so the cleaning is the repair. Expert guidance.

Do it today

Pick your one loose joint, and find a clamp or rope. Ten minutes to plan.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix