Clothes and bags · 13 of 58
Patch a hole that’s too big to sew shut
Expert guidance
What you need
Cloth of similar weight and stretch, scissors, pins, a needle and doubled thread.
Do this
- Wash the garment first. If you can, stitch the tear closed so it can’t grow.
- Measure the hole. Add at least 1.3 cm on every side. Cloth right beside a hole is weak and won’t hold stitches.
- Cut the patch, and leave extra to fold the raw edge under.
- Center it over the hole and pin it. Pin through one layer only, so you don’t sew a trouser leg shut.
- Sew all round the edge with small whip stitches, then knot it inside.
Why this way
Old cut-offs from worn clothes make good patches, because a patch should match the garment’s fiber, weight and stretch. A slightly darker color shows less. Expert guidance.
Do it today
Keep the good parts of one worn-out shirt or trousers as patch cloth. Five minutes.
Where these facts come from
- Make a Fabric Patch, iFixit.
- Whip Stitch on a Patch, iFixit.
- Activity 10: Repair Your Clothes, University of Tennessee 4-H.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
