Skip to content

← Fix It, in Practice

Phones and chargers · 49 of 58

Replace a cracked screen protector

Expert guidance

What you need

Clear tape, an old plastic card, a soft cloth, a new protector, and a hairdryer if you have one.

Do this

  1. Turn the phone off. Work over a cardboard box to catch bits of glass.
  2. Cover the cracks with wide strips of clear tape, so it holds together.
  3. Warm it with a hairdryer on low, keeping it moving.
  4. Lift a corner with the card, and go on slowly. No knife or pin.
  5. Wrap the old protector in paper before it goes in the bin.
  6. Clean the screen with the cloth until there’s no dust.
  7. Line up the new one, and press from the center outward. Push bubbles to the edge with the card.

Why this way

Tape stops loose glass reaching your fingers. Dust under the protector makes the bubbles. Is the screen under it cracked too? Stop, and ask a repair shop. Expert guidance.

Do it today

Run a finger gently along your protector’s edge. Lifting or chipped? Plan to change it. One minute.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix