← Caring for the Earth, in Practice
Water · 19 of 67
Measure what a running tap wastes
Plain arithmetic
Do this
- Put a marked bucket under the tap, open it as you normally do, and time one minute.
- Measure how many liters came out.
- Multiply by the minutes the tap runs while you brush.
- Pour the water on a plant, or use it to wash.
How much it counts
It depends on your home. Where water comes by tanker or every few days, every liter was paid for in money or waiting, and it matters a lot. A review says the Kathmandu Valley needed about 470 million liters a day in 2021 and got about 106 in the wet season and 80 in the dry. Turning off the tap while brushing is standard US EPA advice; your bucket gives your own figure. Saving a liter won’t fix a city’s supply, which needs pipes and sources. Plain arithmetic.
Do it today
Do the one-minute test, using the water afterward. Five minutes.
Where these facts come from
- Start Saving, WaterSense, US Environmental Protection Agency.
- Traditional stone water spouts: status and its practical significance in urbanizing Kathmandu Valley, Nepal, a review, ISET-Nepal.
General information, not professional advice. No page can fit every situation. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
